Peerless-AV's Wall Kiosk Enclosure provides a sleek digital showcase for advertising, entertaining, interactive wayfinding, and much more. These innovative kiosk enclosures accommodate a wide variety of ultra-thin displays in either landscape (KIL models) or portrait (KIP models) orientation. Despite the slim, ADA-compliant 3.97" profile, the kiosk enclosure can easily house media players, fans and other electrical equipment needed to create an impressive digital solution. From hotels to casinos to movie theaters, Peerless-AV's Wall Kiosk Enclosures are ideal for applications that want to take the guest experience up a notch and differentiate their brand.

• Supports wide range of aesthetic options including multiple colors, vinyl wraps, etc. to best match environment or promote brand strategy
• Hinged top frame offers easy access to display and other internal components for easy maintenance and enhanced security
• Low profile design extends 3.96" (101mm) away from the wall which meets the American with Disabilities Act (ADA) certification
• Accommodates ultra-thin displays up to 2.00" (50.8 mm) thick to accentuate slim kiosk design
• Eight-way tool-less adjustment to quickly position display in kiosk window for flush alignment
• Stand-alone kiosk enclosure or fully integrated with screen, media player, power and thermal management, etc

Related Questions and Answers

Q: 1. height ?

A: The stand height is 46.1".

Q: 2. What is the dimensions of the wall mounting component?

A: The Dimensions is 8.5 x 7.9 x 2.6" for the mount. The Mounting-Hole Pattern is 75 x 75 to 100 x 100 mm.

Q: 3. What would be the better size mount for the Dell 26 Ultrawide U2917W - 10 to 29 or 22 to 40 ?

A: I'd go with the 10-29, it's not heavy so it should be fine. Just make sure you grab at least one stud, in not, use 50lb wall anchors

Q: 4. I just started looking at wall mounts and am not really clear on the mounting pattern info. Does this spec: Vesa 200 x 100 to 600 x 400 Compatible mean it would be compatible with my 52 Sony Bravia that has a 400 x 300 hole mount pattern?

A: Yes, this mount will be compatible with your VESA 400 x 300 screen. Peerless makes great products, and they include detailed installation instructions, along with a wide array of hardware you might need for your particular application. The important thing is attaching it to your wall properly.

Q: 5. is this suitable for non vesa monitors? I have the asus vx279. thanks!

A: That monitor cannot be mounted using this mount.

Q: 6. I lost the allen wrench. Where can I find a replacement?

A: Easiest to purchase a set at your local hardware or home improvement store or contact Peerless-AV: Peerless-AV: Tel: (630) 375-5100 or (800) 865-2112 Email info@peerless-av.com

Q: 7. Will this product work with my SAMSUNG LNN55B640?

A: Check the Peerless AV site.

Q: 8. what size backer board would you use when hanging on drywall?

A: The Peerless-AV PA750 Paramount Articulating Wall Mount for 39 to 75" Displays (B&H # PEPA750) has maximum measured dimensions of 28 x 16.8 x 3", so a surface of at least 30 x 18 x 5" would be recommended so that there is room for minor placement adjustments. Please keep in mind that a mount like this is intended to mount onto wooden wall studs, and it is not advisable to attach solely to drywall.

Q: 9. Where do I find my Vesa Patton number?

A: VESA Mounting-Hole Pattern 200 x 100 to 600 x 400 mm: https://www.bhphotovideo.com/lit_files/254915.pdf

Q: 10. Of course the studs are 24" apart and closer to the wall than they should be (if everything was perfect). I'm hanging an older 65" plasma which weighs 86 pounds. My question is two-part. Will the plate extend to 24"? and if I need to move the mounting bracket to left of center, will I be okay? I hope someone reads this and can answer it.

A: The width of the mount is 20" for the Studs, you can mount it on the plate left of center.