The 1' Mogami MCP SS 01 CorePlus 1/4" TRS to 1/4" TRS Cable is a high-performance yet economical cable designed to transmit low-impedance, balanced line-level, and mic-level signals. It can be used to connect a wide variety of audio equipment for studio and live sound applications.

Small in size with a 6mm outer diameter, the MCP SS 01 features two 26-gauge conductors that maintain the clarity of your signal. A proprietary, ultrahigh-density spiral shield eliminates RF noise. The PVC jacket is extremely flexible and exhibits good resistance to rough handling and abrasion.

High-Performance for Studio & Live Sound    Clear Signal, Low Handling Noise    2-Conductor CorePlus Mic/Line Cable    Ultrahigh-Density Spiral Shield

• 1' 1/4" TRS male to 1/4" TRS male balanced cable
• Proprietary ultrahigh-density spiral shield eliminates noise
• Low-noise Cross Link Polyethylene insulation improves clarity
• Conductive polymer co-insulation eliminates handling noise
• Excellent results with low- or high-impedance equipment

Related Questions and Answers

Q: 1. Will this connect the Rode Video Mic to my Leica V-Lux 4?

A: Don't know but if you call B&H and ask for a audio or camera rep they will tell you, I use it on other make equipment.

Q: 2. Does this cable work between a Panasonic GH4 and a Beachtek MCC-2 adapter? Thank you.

A: The GH4 will have a3.5mm mic input unlike the older Lumix cameras. The SC25 will not be necessary. The standard 3.5 jack will work, the SC35 which is available separately, but included with most Beachtek products including the MCC-2 a href= http://bhpho.to/1C8lNYP target= _blank http://bhpho.to/1C8lNYP/a

Q: 3. Does this cable split the signal coming from the TA5F into stereo left right, or is it a mono down mix?

A: The PSC Locking 3.5mm TRS to TA5F Cable for Lectrosonics PDR (6"), BH # PSC1134, may be used to record a stereo (left and right) signal going into the Lectrosonics PDR TA5M's stereo input.

Q: 4. how long is it?

A: The manufacturer has not published the length of the SmallRig 3.5mm TRS to USB-C Audio Cable.

Q: 5. Looking for cable to connect the Vello Freewave Wireless Shutter Release to my FujiXT-2. Vello receiver sized for 2.5mm. XT-2 has 2.5mm or 3.5mm available. Will this work for this application?

A: Take a look at the camera's manuel, if the 3.5 is for remote hook up, no, if the 2.5 MM is for audio that should tell you same thing. My Fujifilm XF-100F uses 2.5 MM port for both MIC/REMOTE and is clearly labeled as such. This being my first Fuji camera can't really speak to the XT-2 but......if you are not using PS (non web based) to process you Fuji Raw files may I ask what program you are using. CS5, ON1 and DxO do not support Fuji RAW, ON1 will process it but converts to Adobe RGB thus negating the menu driving film styles in the camera.

Q: 6. How long is this cable. The description says upto 31.5" but the picture looks like it will barely go 12". Anyone know for sure?

A: The BeachTek SC25 3.5mm to 2.5mm TRS Output Cable is approximately 12" when compressed and it extends to 31.5" when fully stretched.

Q: 7. What's the difference between TRS and TRSS? I will use with BMPCC 6K Pro and Fujifilm X100VI.

A: The Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable (B&H # SECL35TRS) is designed for the Sennheiser MKE 200 and MKE 400 shotgun microphones to connect with DSLR or mirrorless cameras. "TRS" means the physical connector is configured as "tip, ring, sleeve.” The "TRRS" configuration is "tip, ring, ring, sleeve." These configurations relate to the number of conductors used in the cabling and connectors. "TRRS" is common to mobile phones, tablets, and computers. The FUJIFILM X100VI Digital Camera uses a sub-mini sized (2.5mm) TRS audio/microphone input, and it is not compatible with the Sennheiser CL 35 TRS cable. The Blackmagic Design Pocket Cinema Camera 6K Pro features a 1/8"/3.5mm mini stereo TRS audio input, which is compatible with the Sennheiser CL 35 TRS cable.

Q: 8. Will this cable work to connect a RODE VideoMicro external microphone to a Fuji X-T20?

A: Yes, it's exactly what you need for that camera's 2.5mm port.

Q: 9. What is the length from the split location to the end of the XLR cable?

A: The length from the split location to the end of the Mogami Gold 3.5mm TRS Male to Dual XLR Male Y-Cable (6') is 18".

Q: 10. Will this cable work between Hahne Remote Capture Timer Kit and Petnax KP?

A: This cable would not be compatible with the Hahnel Remote Capture Timer Kit and the Pentax KP.