Use your Sony Alpha a7R III or a7 III mirrorless digital camera to capture brilliant photos and 4K Ultra HD video of the undersea world with the Aquatica A7r III Underwater Housing. It features a depth rating of 295', which can be upgraded to 426' for free upon request, and is equipped with a Surveyor moisture alarm and pressure sensor. A pre-installed vacuum check system allows you to confirm watertight integrity before diving, and includes a valve and pump. An Ikelite manual connector enables the attachment of an optional external strobe via sync cord.

The standard, coated eyepiece offers a full view of the camera's viewfinder. The housing provides access to virtually all camera functions via mechanical controls. It also has an ergonomic design with two grips that offer improved handling and attachment points for optional lighting arms. Built for durability, especially resistance to corrosion, the housing is constructed from anodized, machined aluminum and stainless steel.

The A7r III housing ships without a required lens port, though various interchangeable ports are available for different lenses. For full compatibility, see the Port Chart and System Chart.

Vacuum Check System    Depth Rating: 295', Upgradeable to 426'    Mechanical Controls    Access to Virtually All Camera Functions    Anodized Aluminum and Stainless Steel    Interchangeable Lens Port System    Ships without Required Lens Port    Optical Viewfinder    Ikelite Manual Strobe Connector

• Depth rating of 295', which is upgradeable to 426' for free upon request
• Surveyor moisture alarm (audible and visual) and vacuum sensor lets you confirm watertight integrity before dive, and alerts you in unlikely event of a breach in waterproof seal
• Surveyor uses LED indicators
• Housing also includes vacuum valve and extracting pump, which enable you to remove excess air and actually create a vacuum

• Provides easy access to virtually all camera functions via mechanical controls, including push buttons, levers, and grooved dials/knobs
• Ergonomic design with 2 comfortable, grooved grips, which offer improved handling and attachment points for optional lighting arms
• Knobs are large for ease of use when wearing diving gloves
• Provides easy access via your thumb to camera's rear control dial, to which many custom features can be assigned to suit your preferences
• Custom function buttons C1 and C2 located in optimal positions, with C1 extended to be right at your fingertips
• Back-button auto-focus is fully supported
• Extended mechanical shutter release lever
• Oversized knurled knob for focus/zoom with lens
• Easy-access knob for mode control and custom function buttons
• Standard, coated eyepiece offers view of the camera's viewfinder
• Optional, separately sold coated 45° and 180° Aqua View Finders offer an enlarged, enhanced view with 100% coverage, corner-to-corner sharpness, and dioptric adjustment

• Precision-machined in Canada from 6061 T6 aluminum alloy, which has been anodized to MIL-A-8625 Type 2, Class 2 specifications for resistance to corrosion
• Black powder coating baked on at high temperature for extra protection
• Control shafts and push buttons made of T304 stainless steel
• Sacrificial zinc anodes protect sensitive parts of the housing bottom to prevent them from corroding
• Tested in harsh conditions in Canada to ensure durability

• Ships without a required lens port
• For full compatibility, see port chart and system chart linked above
• Housing is equipped with a port locking mechanism to prevent accidental rotation of port or extension

• This version of the housing ships without strobe connectors and is specifically intended for video recording, so be sure to grab an LED or other type of constant video light for sufficient illumination and color correction

• Top 1/4"-20 accessory hole
• Dual 1/4"-20 threaded holes on top of grips for attaching optional lighting arms
• Multiple bulkhead entry/access points for connecting optional accessories, such as external monitors or remote triggering devices like pole-mounted RCS remote camera system
• Three 1/4"-20 threaded holes on bottom for optional bracket, tray, or tripod

Related Questions and Answers

Q: 1. Will this fit Sony A7IV?

A: Yes LensCoat BodyBag M for Sony Alpha a7 III, a7R III, a7R IV, a9, a9II (Green) fits the Sony A7IV.

Q: 2. anyone test fit for Sony A1? thanks

A: Yes, it will fit the Sony A1 camera body with the Sony VG-C4EM Vertical Grip. Sony A 1 has the exact same body size as Sony a9 II which is mention as the compatible cameras. Also this body bag is made with a stretchable neoprene material.

Q: 3. Can you switch between photo/video mode?

A: You could switch between photo and video mode when the Sony a7 IV camera is in the Ikelite Underwater Housing for Sony a7 IV.

Q: 4. Does this come with the dry port for my 16-35mm 2.8 sony GM lens ? I'm assuming i don't need to buy anything else besides whats mentioned above

A: Lens ports and lens accessories are not included with the purchase of the Ikelite 200DL Underwater Housing for Sony Alpha 1 or a7S III with Dry Lock Port Mount. As different users may use different lenses with the underwater housing, the lens port is not included and must be purchased separately. The Ikelite DL 8" Dome Port for Wide-Angle and Zoom Lenses in DSLR and Mirrorless Housings, B&H # IK75340, the Ikelite DL 28mm Port Extension, B&H # IK75028, the Ikelite DL 50mm Port Extension, B&H # IK75050, and the Ikelite 5509.16 Zoom/Focus Gear, B&H # IK550916, would be the lens accessories needed for use with the Sony FE 16-35mm f/2.8 GM Lens.

Q: 5. Will this work with a metabones and canon 16-35mm?

A: Yes the Canon 16-35 f2.8 lens will fit with the Metabones adapter using these parts: https://bhpho.to/2Y725NF https://bhpho.to/2F653Lx https://bhpho.to/2Y2gaf7 And: https://bhpho.to/2Y5Cp3K

Q: 6. Is this compatible with the Sony A1?

A: The correct model for the Sony A1 is the Ikelite 200DL Underwater Housing for Sony Alpha 1 or a7S III with Dry Lock Port Mount, BH # IKUWHA1A7S3 https://bhpho.to/2VcDRF1

Q: 7. Is it possible to shoot aperture priority with this? Is there a way to config the G7x iii so that you can adjust aperture with the back buttons instead of the dials? Thanks

A: [11:30 AM] Lawrence Cohen The Ikelite Underwater Action Housing for Canon PowerShot G7 X Mark III allows you to shoot in aperture priority mode. Check the Canon PowerShot G7 X Mark III user manual to change the aperture control button. All rear buttons can be accessed in the housing.

Q: 8. What length lens does this fit?

A: The Ikelite Sony A7IV pictured here does not come with the required domes/ports. For typical use, you would purchase the dome/port that matches the lens you plan on using. We are unable of sharing external links via this system, but please visit Ikelite's website and they have an extensive list of the ports required to fit the 71479 housing.

Q: 9. Will this fit Sony A7 iii with 16-50mm lense attached?

A: LensCoat BodyBag M with Grip for Sony Alpha a7 III, a7R III, a7R IV, a9, a9II is only for the camera body with attached battery grip and it will not fit with a kit lens attached.

Q: 10. Hi, is this compatible with the Sony Zeiss FE16-35mm f4 lens and Sony 16-50mm kit lens? Thank you

A: Yes this would work for both lenses