Install your audio equipment up to 40' from your source with the SVS SoundPath Wireless Audio Adapter. It allows you to transmit audio signals from the 1/8" or RCA output of your source device to a subwoofer, amplifier, or powered speaker system up to 40' away, within line of sight. It outputs in 16-bit/48 kHz CD-quality audio to help minimize loss of quality. It includes mono and stereo 1/8"-to-RCA adapter cables for virtually instant installation.

Up to 40' Range    2.4 GHz Transmission Frequency    16-Bit/48 kHz CD-Quality Audio    For Use with Subwoofers, Powered Systems    Includes 1/8"-to-RCA Adapter Cables

Subwoofers are typically the largest component in any audio or home theater system, so placement can be a challenge. The SoundPath Wireless Audio Adapter adds wireless connectivity, giving you more subwoofer placement options and decreasing cable clutter.

The full frequency response allows the adapter to unlock wireless connectivity for a stereo zone of loudspeakers, powered home theater surround sound speakers, amplifiers, and more at CD quality with a low latency of <25.5 ms within the 2.4 GHz frequency band.

Connect the transmitter to your A/V receiver, TV, or other audio source via the included RCA adapter cable, connect the receiver to a subwoofer, powered speaker, or amplifier, then pair the two devices, and you'll enjoy wireless audio between the two. The SoundPath Wireless Audio Adapter sends a 16-bit/48 kHz signal for CD-quality audio with no cable clutter. For added versatility, up to three adapters can be paired to create a multi-room distributed audio system.

Related Questions and Answers

Q: 1. Can I connect this to my Marantz PM6006 amplifier? It does not have a dedicated sub output.

A: You would do that by going from the receiver into one of the RCA inputs on the Marantz amplifier. Your sound source would connect to the transmitter, from the RCA output or 1/8" output of that audio source.

Q: 2. Any chance for this to work for recording calls from a computer? Via Google Voice or MS Teams, for instance.

A: The JK Audio CellTap 4C Wireless Phone Audio Tap Adapter could be used with computers that have a 3.5mm TRRS connection for input and output similar to the connection found on smart phones.

Q: 3. Does this item include a TRRS to TRSS cable? Does it include any other cables? The "What's in the Box" section doesn't mention any included cables. Thanks.

A: They both provide you with a 3.5mm TRS and a 3.5mm TRRS cable in the box.

Q: 4. Is there any chance for this to work for recording calls from a computer? Via Google Voice or MS Teams for instance.

A: The JK Audio CellTap 4C Wireless Phone Audio Tap Adapter could be used with computers that have a 3.5mm TRRS input and output connection similar to those found on smart phones.

Q: 5. Can I use this to take live in calls during a livestream and connect the record output to my switcher audio input?

A: This device is good for recording a smartphone or cellphone conversation only. To take calls in a livestream situation, I would recommend the JK Audio Daptor Two Wireless Phone Audio Interface, BH #JKDAP2, which allows you to bring the caller into a channel of a mixing board, then to return the signal to the caller, minus their voice, and send entire conversation out to your switcher. The Mackie ProFX10v3 10-Channel Sound Reinforcement Mixer with Built-In FX, BH #MAPROFX10V3 would be a good example of a mixer that wold work well in this scenario.

Q: 6. Any way to turn this off? I have this unit and love it but I have to forget this device each time I want to use my phone or else the audio in the phone is silenced.

A: it would be easy if you just turn off bluetooth on your iphone. turn it back on when you needed it.

Q: 7. Does this come with a connector with 2 RCA males going to 2 RCA males?

A: Yes

Q: 8. on the receiver end, can the speaker be non-powered?

A: This wouldn't power a passive speaker. The speaker on the other end would need an amp if it is a passive speaker.

Q: 9. I have a Denon 150 speaker that wont connect to my computer through bluetooth. Could i plug this into the aux port for BT?

A: Yes you can use the Logitech Bluetooth Audio Adapter connected to the 3.5mm Aux Input on your Denon 150 Speaker.

Q: 10. Does it have to be plugged all the time or does it hold the power on its battery? Plan to use this in the car.

A: This unit requires continuous power from the included power cable.