The HEDEN RED 4-Pin Contact Closure R/S Cable controls run/stop functionality between the HEDEN CARAT or YMER lens control system and RED cameras with contact closure protocol. The cable features a 4-pin sync LEMO male connector on one end and half-moon 2-pin LEMO on the other.

Run/Stop Cable for CARAT/YMER and RED    For RED with Contact Closure Protocol    4-Pin Sync LEMO to Half-Moon 2-Pin LEMO

Related Questions and Answers

Q: 1. What are the power requirements (amps/watts) to operate this motor?

A: HEDEN offers a D-Tap Power Cable for this motor, B&H # HEAC51. As long as you have this cable and a battery with a D-Tap Accessory Port you will be able to properly power the motor. B&H # HEAC51 - https://bhpho.to/2I4xw7B Battery Option - https://bhpho.to/2mzvEZW

Q: 2. Does this have mic level or line level output?

A: The Korg CM-300 Clip-On Contact Microphone outputs a Mic level signal.

Q: 3. Hi there, It states this works with DSMC2 cameras, however the power input in 4 pin, this cable is 6pin, will it still work?

A: The RED DSMC2 cameras offer a 6-Pin 1B DC IN through the modules, and the Kondor Blue D-Tap to LEMO 6-Pin Cable for RED RAPTOR DSMC2/DSMC3 & KOMODO X (20") provides that connection to power the camera from an external brick battery through D-Tap.

Q: 4. Would this work with the BMPCC 6K Pro? Thanks

A: No this will not work. There are D-Tap Cables designed specifically for the Pocket Cinema Cameras (4K/6K/6K Pro) Here are a few considerations Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack B&H # BLCCPOC4KDC MFR # CABLE-CCPOC4K/DC Kondor Blue Coiled D-Tap to 2-Pin Power Cable for BMPCC 6K/4K (Blue) B&H # KOIPUBM4KCBL MFR # WEIPUBM4KCOIL_FBM IndiPRO Tools Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K & 6K (18-40") B&H # INCDTB4K MFR # CDTB4K CAMVATE D-Tap Male to 2-Pin Female Extension Power Cable for BMPCC 4K/6K Camera B&H # CAC2398 MFR # C2398

Q: 5. Will this work with Samsung SSD EVO 1 TB?

A: Has long the Samsung SSD Eco has a sata connection the cable will work.

Q: 6. Is there a version of this cable where the Lemo side is Right Angle?

A: Kondor Blue does not have a right angle option for the Kondor Blue D-Tap to LEMO 6-Pin Cable for RED RAPTOR DSMC2/DSMC3 & KOMODO X (20"). However, we have listed an alternate right angle choice below from Bescor. Bescor Coiled D-Tap to LEMO 6-Pin Cable for RED RAPTOR DSMC3/DSMC2 BH #BERAPTORDT

Q: 7. I have 2 Paterson contact printers, both in excellent condition except the grey foam backing that the photographic paper is placed on has disintegrated and fallen apart. I want to know where I can buy this backing in order to replace it? Thank you

A: You can try using a foam board, which is available at this link https://www.bhphotovideo.com/c/product/996282-REG/archival_methods_82_8511_1_8_acid_free_foamboard_8_5.html . The product enables the user to place an 8X10 photo paper between the negatives (top) and the foam (bottom) in a darkroom to make a contact print of the negatives. This product is not exactly a replacement but it should work.

Q: 8. Is this compatible with Z Cam E2 S6?

A: This cable is not compatible. You will need a male 2-pin LEMO cable. Here is an example of one compatible cable: https://www.bhphotovideo.com/c/product/1592220-REG/kondor_blue_kb_dtap_lemo2p_d_tap_to_lemo_2_pin.html

Q: 9. Can this Korg CM300BK be used as a substitute for a piezo pickup for acoustic guitar?

A: The Korg CM300BK is technically a piezo pickup, as it picks up the vibrations of the musical instrument, versus an electromagnet pickup, which picks up differences in the magnetic field created by moving steel strings. So, yes, you will get the same effect as many other piezo pickups.

Q: 10. Is the CM300 a newer version of the CM200?

A: Yes, the CM-300 is the newer model. The CM-200 is the older version which is no longer available. Both models work in the same manner.