The RigWheels RP01 RigPlate serves as a resourceful component of the camera mounting hardware. Its first function is to serve as a mounting plate for attaching RigWheels. The RigPlate and 1 set of RigWheels (sold separately) provide with smooth movement as a tabletop / skater dolly that can be used on any smooth or hard surface.

Using the RigPlate as a pipe dolly gives a scalable slider / dolly option for the new generation of mid-size and compact cameras. Attaching 2 RigPlates together creates a captive-rail camera carriage that allows secure camera movement at any angle. Using the RigPlate in conjunction with RigAxels (sold separately) adds even more capability to this simple system with a more traditional tabletop dolly setup and a robust pipe-dolly option.

The RigPlate is a camera support platform and can be used for much more than camera movement. A variety of several different mounting points allow you to attach a myriad of accessories. There are ten 1/4-20 and five 3/8-16 threaded holes (industry standard sizes) in addition to four 5/16" and five 3/8" pass-through holes.

The RigPlate can be turned into a rock-solid suction mount by adding the A-Cups or B- Cups (sold separately).

Reduces Strain on Camera/Gimbal Rig    2 x RigPlates    8 x Coated Cables    8 x Cloud Mount Clamps    Versatile Component System    Made in the USA

Related Questions and Answers

Q: 1. Can I use the Zhiyun Crane 3?

A: Yes, but you will need to find a cheese plate/screws to mount to the isolator or nose plate.

Q: 2. What is the weight of the plates and cables separately?

A: The Cloud Mount Vibration Isolator Cable Clamp will weigh .2lbs, the RigPlate will weigh 1.60lbs, and the Cable – 1/4″ x 7″ will weigh about .21lbs.

Q: 3. Can it be installed on a suction cup with cheese plate such as Matthews 10" Vacuum Cup with Cheese Plate?

A: The Digital Photo solutions Vibration mount would work best with Suction cup mounting solutions that support the isolator like BH #CASK01. However it is a universal solution and could work with other suction cup mounting solutions like Matthews.

Q: 4. What is the supported payload?

A: Hi Jonathan, The Cloud Mount is designed to be scaleable to whatever you need to put on it. The "standard" versions are appropriate for a system like a Movi Pro with a compact camera body (like Red or C300 etc) with compact glass. The Cloud Mount Pro comes with cabling which can accommodate gimbals as large as Movi XL with full size camera bodies. Every build and placement are unique but I hope that helps.

Q: 5. It says in the description "Standard Mitchell Castle Nut Threading" I bought another Proaim product and it is NOT - is this?

A: Proaim does state that the Proaim Mitchell Male Mount with Castle Nut for Vibration Isolator is a standard Mitchell Castle Nut threading and so should be compatible; however we recommend using this item with other Proaim products for best compatibility.

Q: 6. What is the weight capacity of this isolator?

A: The RigWheels Cloud Mount Pro Vibration Isolator can hold up to 65lbs.

Q: 7. Is this designed to be used with suction cup on bottom? Can it be used with the suction cup on top and gimbal hanging below?

A: Here is a response directly from Kessler about your inquiry: While it would be possible to rig the KillShock Mini upside down the results are not likely going to be what the customer is expected as the Shock Modules would no longer be compressing and isolating the camera from vibrations as the weight of the camera rig would be pulling the shock modules. If the customer is looking for an underslung type of set-up with a vibration isolator a better solution would be the KillShock (MG1048) and the KillShock Inversion Mounting Kit (MG1068). KillShock (MG1048): https://www.bhphotovideo.com/c/product/1430583-REG/kessler_crane_mg1048_killshock_isolator_system.html KillShock Inversion Mounting Kit (MG1068): https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 8. The load capacity is 132 lbs. and the Sony camera mounted to it weighs under 2 lbs. Is that correct?

A: The DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is made of Aluminum alloy. The weight is 1.8lbs, and the weight support is 132lbs.

Q: 9. It supports and isolate a Sony FR7 as shown on the photo?

A: Yes, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps can accommodate and isolate the Sony FR7 Cinema Line PTZ Camera.

Q: 10. In the video you can see a part in between the isolator and the power base of the gimbal. What would that be the bridge between the two?

A: There are several manufacturers that make the DJI RS2 (Power) Base Plate.