This set of eight Cloud Mount Cable Clamps from RigWheels can be used to double the capacity of the Cloud Mount Vibration Isolator.

Each clamp can be used to adjust the length of its cable loop, providing fine-tuned resistance for the isolator. Mounting screws are included for each clamp.

Reduces Strain on Camera/Gimbal Rig    16 x Coated 1/4 x 7" Cables    2 x RigPlates    16 x Cloud Mount Clamps    1 x Socket Button Head Screw    Versatile Component System    Made in the USA

Related Questions and Answers

Q: 1. In the video you can see a part in between the isolator and the power base of the gimbal. What would that be the bridge between the two?

A: There are several manufacturers that make the DJI RS2 (Power) Base Plate.

Q: 2. Is this designed to be used with suction cup on bottom? Can it be used with the suction cup on top and gimbal hanging below?

A: Here is a response directly from Kessler about your inquiry: While it would be possible to rig the KillShock Mini upside down the results are not likely going to be what the customer is expected as the Shock Modules would no longer be compressing and isolating the camera from vibrations as the weight of the camera rig would be pulling the shock modules. If the customer is looking for an underslung type of set-up with a vibration isolator a better solution would be the KillShock (MG1048) and the KillShock Inversion Mounting Kit (MG1068). KillShock (MG1048): https://www.bhphotovideo.com/c/product/1430583-REG/kessler_crane_mg1048_killshock_isolator_system.html KillShock Inversion Mounting Kit (MG1068): https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 3. It says in the description "Standard Mitchell Castle Nut Threading" I bought another Proaim product and it is NOT - is this?

A: Proaim does state that the Proaim Mitchell Male Mount with Castle Nut for Vibration Isolator is a standard Mitchell Castle Nut threading and so should be compatible; however we recommend using this item with other Proaim products for best compatibility.

Q: 4. Would this set up work for a lighter set up? Say a Ronin S and blackmagic?

A: The setup is customizable and can be adjusted for any size and weight camera by changing the cables for different lengths or diameter. They are common cables and easy to find.

Q: 5. Can I use the Zhiyun Crane 3?

A: Yes, but you will need to find a cheese plate/screws to mount to the isolator or nose plate.

Q: 6. It supports and isolate a Sony FR7 as shown on the photo?

A: Yes, the RigWheels PTZ Camera Wall Mount Vibration Isolator/Damper with Pipe Clamps can accommodate and isolate the Sony FR7 Cinema Line PTZ Camera.

Q: 7. What is the supported payload?

A: Hi Jonathan, The Cloud Mount is designed to be scaleable to whatever you need to put on it. The "standard" versions are appropriate for a system like a Movi Pro with a compact camera body (like Red or C300 etc) with compact glass. The Cloud Mount Pro comes with cabling which can accommodate gimbals as large as Movi XL with full size camera bodies. Every build and placement are unique but I hope that helps.

Q: 8. Does it have to be used with a particular mount?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator is a universal solution. However if you are attaching a DJI Gimbal like the RS3 Pro or RS2 to the shock mount you would need a gimbal base adapter BH #DIPDRS2 https://bhpho.to/3BtjbLM

Q: 9. I'm looking for a way to reduce vibration while filming on a boat and am wondering if this could be mounted on a monopod?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator has many mounting points that could be used with a MonoPod. The HULK-ISO will only help with motor vibrations and not the rocking and pitching motion of watercraft.

Q: 10. Is the Ronin S4 compatible with this kit?

A: Yes, the DJI RS4 Gimbal Stabilizer is compatible with the Proaim Pro Vibration Isolator for Camera Gimbals (11 to 33 lb Payload).