Use the OPUS-RX 4K HDR HDBaseT Receiver from Atlona to convert an incoming HDBaseT signal from an Atlona Opus Matrix Switcher to HDMI and connect it to a display or projector. This receiver offers connections for HDMI video and audio, bidirectional IR control, and RS-232 control, all over a single HDBaseT connection.

HDBaseT is advantageous as it allows for longer cable distances up to 330' than HDMI alone, while carrying other important control signals along a single cable. Up to DCI/UHD 4K HDMI resolutions are supported, as is HDCP 2.2 in order to play protected high-resolution content. It also supports return audio from a display via its TOSLINK connector over HDBaseT. As this receiver accepts downstream power using the HDBaseT connection, no separate power supply is required.

Receive Video from Opus Matrix Switcher    Receives up to 4K HDMI Video up to 330'    Receives Power over HDBaseT from Switch    RS-232 & Bidirectional IR Control    HDCP 2.2 Compliant, 18 GB/s Bandwidth    Supports HDBaseT Audio Return Path

• Compatible with new and emerging DCI/UHD 4K and HDR-capable sources and displays
• Compatible with 4K60 HDR10 and Dolby Vision (with a future firmware update) at 30p as well as HLG (Hybrid Log-Gamma) for 60p HDR broadcast services

• Adheres to latest specification for High-Bandwidth Content Protection
• Allows protected content stream to pass between devices

Industry standard IEEE 802.3af PoE for receiver is supplied by transmitter over HDBaseT

Receives 4K HDMI signals as well as Ethernet, power, and control signals up to 330' using Cat 6/6a/7 cable

Control signals travel over HDBaseT link for maximum control system flexibility

IR input designed to work with 12V IR receivers for source control

Provides a return audio pathway from a television via TOSLINK digital audio interface and back to the Opus matrix switcher over HDBaseT

Enables HDBaseT transmission of HDMI up to 18 Gb/s using extremely light video compression with no latency

• Supports PCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS Digital Surround, and DTS-HD Master Audio
• Allows any multi-channel audio stream to be used within a professional audio system

Placement of ports on rear panel simplifies wire management

• Front-panel USB port provides an easy means for kit upgrades
• Ensures long term system return on investment

• LED indicators provide power and HDBaseT link status information
• Provides easy setup and troubleshooting

Easy installation in confined spaces behind displays and above projectors

Related Questions and Answers

Q: 1. Can I hook a pair of Jbl Tlx 150, 4 ohms speakers to this amp. safely

A: A single 4ohm pair shouldn't give you any issues.

Q: 2. Compatible with Ratpac Satellite?

A: The Godox TimoLink RX Wireless DMX Receiver BH #GORX is a CRMX receiver and should be able to receive signal from any CRMX compatible transmitter.

Q: 3. What transmitter do I need for this?

A: This item is hard wired to a matrix switcher. Consequently, we are not sure what your question is. Please email telling us what you wish to do. provideo@a href= http://bhphotovideo.com target= _blank bhphotovideo.com./a

Q: 4. Will this work with the Exalux Control One?

A: No, the Exalux system runs on a CRMX, DMX512 protocol system we suggest looking into the following adapter which works with the Exalux system via DMX input and will provide a Lumen Radio CRMX protocol signal. Godox TimoLink TX Wireless DMX Transmitter BH #GOTX • MFR #TIMOLINK TX https://www.bhphotovideo.com/c/product/1748675-REG/godox_tx_wireless_dmx_transmitter.html

Q: 5. support eARC?

A: No. Intelligent ARC only.

Q: 6. Is TimoLink RX directly compatible with virtual consoles such as Blackout or ARRI stellar app? Or do you have to purchase TX?

A: No, the following system runs of its own protocol system. Freq 2412.99 mhz - 2464.49 mhz

Q: 7. Does this product offer opto-isolation from input to output?

A: Unfortunately Atlona does not disclose this information, nor mention it in their product specifications.

Q: 8. Is this capable of seamless switching?

A: The Alfatron MUH44E 4x4 4K HDBaseT Matrix Switcher is not considered a seamless switcher.

Q: 9. If a computer is connected to an input and no output is active: Will the computer still detect that it's connected to a monitor?

A: No, the output from the Ocean Matrix UHD 4K HDR 4x4 HDMI Matrix Switcher with Downscaling must be active for the signal to be seen.

Q: 10. I need to de-embed 4K HDMI and feed the audio to an ADAT input on a Scarlet 18i20 audio interface. Is the optical output compatible with ADAT or is it just the consumer version for A/V receivers?

A: The Focusrite Scarlett 18i20 18x20 USB Audio Interface (3rd Generation) does have optical inputs. While we are not aware of a specific test between the two products, we believe it should be possible to feed the Atlona in to the Scarlett Product.