Designed for studio applications that require a balanced cable, the 18' RapcoHorizon 1/4" TRS Male to XLR Male Balanced Cable features hand-soldered Neutrik connectors on both ends and uses Rapco's standard MIC1 wire. The cable is made to provide a quiet, rugged, reliable connection every time.

Hand-Soldered Neutrik Connectors    Rugged Connection and Quiet Performance

24 AWG Conductor

Bare Annealed Copper Serve Shield

95% Shield Coverage

Matte PVC jacket

0.23" Outside Diameter

Capacitance: 1 pF/ft at 1 kHz

Conductor to Shield Capacitance: 37 pF/ft at 1 kHz

Impedance: 70 Ohms

DC Resistance at 68°F: 23 Ohms / 1000 ft

Related Questions and Answers

Q: 1. Will this work on the Sony transmitters like the D21? I know the polarity of the mic inputs is different to Sennheiser but not sure about the outputs.

A: It is not recommended to use the Cable Techniques Mini TRS to XLR Male Low-Profile Sennheiser Wireless Output Cable (18") with Sony receivers.

Q: 2. Can I use a Sanken COS-11D with a Zoom FX3 using this adapter?

A: Yes, a Sanken COS-11D Lavalier Microphone that has a 3.5mm TRS connector can be used with the Zoom F3 Portable Field Recorder when connected with an adapter like the RODE VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter or the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). You will need to turn on phantom power on F3 to power the mic.

Q: 3. Will this work with a Deity V.Lav mic plugged in to the XLR socket on a Zoom H6?

A: Yes, the VXLR Pro adapter will work with the Deity V.Lav. Deity recommends their D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DXLR) which provides the same type of conversions for the connector and voltage.

Q: 4. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.

Q: 5. Can I use the VXLR Pro to connect a Roland CS-10EM Binaural Mic to XLR connectors capable of supplying phantom power?

A: Yes you can use the Roland CS-10EM with the Rode VXLR Pro.

Q: 6. Am I correct, when assuming that one could use a y-splitter and 2 of these to “symmetrize” the Sound Devices Mixpre 3/6 unbalanced trs outputs?

A: No, the VXLR Pro is not intended for use with a line level audio signal. It is intended for use with a microphone that has a 3.5mm TRS connector that requires plug-in power and enables connection to an XLR mic input that supplies phantom power and it will convert phantom power to plug-in power. It would certainly help to have more information about what type of device or input you will be connecting the line output from the MixPre-3 or 6 to. Since you are sending line level audio from a single 3.5mm TRS output and want to split it to two balanced XLR male connections, it sounds like what you need is a direct box like the Kopul SDI-PPC Stereo Multimedia Passive Direct Box (B&H # KOSDIPPC). This direct box has a stereo 3.5mm input and will allow you to split the output from the MixPre-3 or 6 to left and right balanced XLR outputs. Please contact us by phone or through live chat on the website if you would like further assistance.

Q: 7. is this a true TRS? meaning the tip is wired to pin 2, ring is wired to ping 3 and sleeve is pin 1 ? Or is this a pre-summed TRS?

A: This cable is wired straight through. Standard TRS. Pin 2 to Tip, Pin 3 to Ring, Pin 1 - Ground/Shield.

Q: 8. Does B&H sell a locking make 3.5trs to non-locking 3.5trs short cable, as this will be ideal for connecting this adapter to my preferred mic and maximizing connection integrity, at least on the adapter side. Thank you.

A: No. A locking 3.5mm male TRS to a "non-locking" 3.5mm female TRS would be as special order, made to order from a specialty shop, such as Whirlwind. B&H could order for you$$.....

Q: 9. Does this cable fit to RØDELINK FILMMAKER receiver and transmitter output connection 3.5mm TRS Locking Jack Socket ?

A: This cable will work with the Rode Link receiver output.

Q: 10. Can this adapter be used to connect a Lavignes Mic with the XLR connection directly to the G4 transmitter?

A: This cable is not appropriate for your needs, is for outputting from a wireless receiver to a camera or mixer. If you desire to connect a dynamic mic to a Sennheiser wireless transmitter, i would recommend using a Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable (4'), BH #RECASEK100M.