Designed for studio applications that require a balanced cable, the 2' RapcoHorizon 1/4" TRS Male to XLR Male Balanced Cable features hand-soldered Neutrik connectors on both ends and uses Rapco's standard MIC1 wire. The cable is made to provide a quiet, rugged, reliable connection every time.

Hand-Soldered Neutrik Connectors    Rugged Connection and Quiet Performance

24 AWG Conductor

Bare Annealed Copper Serve Shield

95% Shield Coverage

Matte PVC jacket

0.23" Outside Diameter

Capacitance: 1 pF/ft at 1 kHz

Conductor to Shield Capacitance: 37 pF/ft at 1 kHz

Impedance: 70 Ohms

DC Resistance at 68°F: 23 Ohms / 1000 ft

Related Questions and Answers

Q: 1. Will this work with a Deity V.Lav mic plugged in to the XLR socket on a Zoom H6?

A: Yes, the VXLR Pro adapter will work with the Deity V.Lav. Deity recommends their D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion (B&H # DXLR) which provides the same type of conversions for the connector and voltage.

Q: 2. Would this cable work to connect a Shure SM58 to a Tentacle Sync Track E Timecode Audio Recorder?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable can be used to connect a Shure SM58 Cardioid Dynamic Microphone to the Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 3. Can I use a Sanken COS-11D with a Zoom FX3 using this adapter?

A: Yes, a Sanken COS-11D Lavalier Microphone that has a 3.5mm TRS connector can be used with the Zoom F3 Portable Field Recorder when connected with an adapter like the RODE VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter or the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). You will need to turn on phantom power on F3 to power the mic.

Q: 4. is this a true TRS? meaning the tip is wired to pin 2, ring is wired to ping 3 and sleeve is pin 1 ? Or is this a pre-summed TRS?

A: This cable is wired straight through. Standard TRS. Pin 2 to Tip, Pin 3 to Ring, Pin 1 - Ground/Shield.

Q: 5. I need to connect a Rode Go ll to a mixer board. What do I need cables or adapters

A: You can use a standard cable with 3.5mm TRS male and XLR male connectors such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 1.5' (B&H # KORSMXM015) to connect the Rode Wireless GO II Receiver to the input on a mixer. Another option is to use an XLR adapter with the 3.5mm TRS cable that is included with the Wireless GO II System. For the XLR adapter, you can use the Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR).

Q: 6. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.

Q: 7. Will it work with my Rode Rodelink filmmaker kit and my Zoom H6?

A: Yes it. will.

Q: 8. Will this cable work to connect an XLR shotgun microphone or XLR studio mic to Sennheiser EK100 G4 transmitter?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable is compatible for use with the Sennheiser SK 100 G4 Wireless Bodypack Transmitter, however, the shotgun microphone will need to be powered by a battery or separate phantom power supply (if needed), as the transmitter will not supply any voltage to the microphone when using this cable. (The Sennheiser EK 100 G4 is a Camera-Mount Wireless Receiver).

Q: 9. Will this work with my Zoom H5 and Saramonic WM2100 Lav mics?

A: Yes, the Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter can be used to make a hardwired connection between the lavalier microphones included in the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System and the Zoom H5 Portable Handy Recorder. The VXLR Pro will properly convert phantom power from the H5's XLR inputs down to the plug-in power voltage required by the lavaliers.

Q: 10. Does B&H sell a locking make 3.5trs to non-locking 3.5trs short cable, as this will be ideal for connecting this adapter to my preferred mic and maximizing connection integrity, at least on the adapter side. Thank you.

A: No. A locking 3.5mm male TRS to a "non-locking" 3.5mm female TRS would be as special order, made to order from a specialty shop, such as Whirlwind. B&H could order for you$$.....