Designed for studio applications that require a balanced cable, the 60' RapcoHorizon 1/4" TRS Male to XLR Male Balanced Cable features hand-soldered Neutrik connectors on both ends and uses Rapco's standard MIC1 wire. The cable is made to provide a quiet, rugged, reliable connection every time.

Hand-Soldered Neutrik Connectors    Rugged Connection and Quiet Performance

24 AWG Conductor

Bare Annealed Copper Serve Shield

95% Shield Coverage

Matte PVC jacket

0.23" Outside Diameter

Capacitance: 1 pF/ft at 1 kHz

Conductor to Shield Capacitance: 37 pF/ft at 1 kHz

Impedance: 70 Ohms

DC Resistance at 68°F: 23 Ohms / 1000 ft

Related Questions and Answers

Q: 1. How does this differ from the VXLR+?

A: Both the VXLR+ and VXLR Pro are 3.5mm TRS female to XLR male adapters with a phantom power converter that can convert 12 to 48V phantom power down to 3 to 5V plug-in power. The VXLR Pro differs from the VXLR+ because it also provides a transformer-balanced output which preserves the signal quality and prevents it from degrading when using a long cable run.

Q: 2. Does B&H sell a locking make 3.5trs to non-locking 3.5trs short cable, as this will be ideal for connecting this adapter to my preferred mic and maximizing connection integrity, at least on the adapter side. Thank you.

A: No. A locking 3.5mm male TRS to a "non-locking" 3.5mm female TRS would be as special order, made to order from a specialty shop, such as Whirlwind. B&H could order for you$$.....

Q: 3. What happens to the -20 safety channel when the Rode VideoMic NTG is used with this "balanced" adapter?

A: When used with a standard unbalanced 3.5mm microphone cable, the Rode VXLR Pro's extra pin (used for inverted polarity audio signal in balanced devices) would be inert, but unbalanced audio is still passed through the balanced connection.

Q: 4. I need to connect a Rode Go ll to a mixer board. What do I need cables or adapters

A: You can use a standard cable with 3.5mm TRS male and XLR male connectors such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 1.5' (B&H # KORSMXM015) to connect the Rode Wireless GO II Receiver to the input on a mixer. Another option is to use an XLR adapter with the 3.5mm TRS cable that is included with the Wireless GO II System. For the XLR adapter, you can use the Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR).

Q: 5. Will the Lav mic came with the "Sennheiser G3" work with the "Rode VXLR PRO" when connecting to a mixer-recorder such as the MixPre ? Does it accept the screw lock from the "G3's lav" TRS connector? Thank you for the answers.

A: Yes, the Rode VXLR PRO adapter can be used with a Sennheiser lavalier microphone to enable connection to an XLR mic input on a mixer/recorder such as a Sound Devices MixPre model. The VXLR PRO has a threaded female 3.5mm TRS connector on one side to attach the mic and a male XLR connector on the other end allows the mic to be plugged into an XLR input. Additionally, the adapter converts 48V phantom power into plug-in power so you can safely provide power to the mic.

Q: 6. Can I use the VXLR Pro to connect a Roland CS-10EM Binaural Mic to XLR connectors capable of supplying phantom power?

A: Yes you can use the Roland CS-10EM with the Rode VXLR Pro.

Q: 7. Will this work with my Zoom H5 and Saramonic WM2100 Lav mics?

A: Yes, the Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter can be used to make a hardwired connection between the lavalier microphones included in the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System and the Zoom H5 Portable Handy Recorder. The VXLR Pro will properly convert phantom power from the H5's XLR inputs down to the plug-in power voltage required by the lavaliers.

Q: 8. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.

Q: 9. Will it work with my Rode Rodelink filmmaker kit and my Zoom H6?

A: Yes it. will.

Q: 10. What is the function of the DC-Blocking Capacitor?

A: The Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable (4'), BH # RECASEK100M, contains a DC-blocking capacitor to prevent the passing of voltage that may damage the transmitter.