Designed for studio applications that require a balanced cable, the 75' RapcoHorizon 1/4" TRS Male to XLR Male Balanced Cable features hand-soldered Neutrik connectors on both ends and uses Rapco's standard MIC1 wire. The cable is made to provide a quiet, rugged, reliable connection every time.

Hand-Soldered Neutrik Connectors    Rugged Connection and Quiet Performance

24 AWG Conductor

Bare Annealed Copper Serve Shield

95% Shield Coverage

Matte PVC jacket

0.23" Outside Diameter

Capacitance: 1 pF/ft at 1 kHz

Conductor to Shield Capacitance: 37 pF/ft at 1 kHz

Impedance: 70 Ohms

DC Resistance at 68°F: 23 Ohms / 1000 ft

Related Questions and Answers

Q: 1. Can this adapter be used to connect a Lavignes Mic with the XLR connection directly to the G4 transmitter?

A: This cable is not appropriate for your needs, is for outputting from a wireless receiver to a camera or mixer. If you desire to connect a dynamic mic to a Sennheiser wireless transmitter, i would recommend using a Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable (4'), BH #RECASEK100M.

Q: 2. Can I use a Sanken COS-11D with a Zoom FX3 using this adapter?

A: Yes, a Sanken COS-11D Lavalier Microphone that has a 3.5mm TRS connector can be used with the Zoom F3 Portable Field Recorder when connected with an adapter like the RODE VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter or the RODE VXLR+ 3.5mm TRS Female to XLR Male Adapter with Phantom Power Converter (B&H # ROVXLRP). You will need to turn on phantom power on F3 to power the mic.

Q: 3. is this a true TRS? meaning the tip is wired to pin 2, ring is wired to ping 3 and sleeve is pin 1 ? Or is this a pre-summed TRS?

A: This cable is wired straight through. Standard TRS. Pin 2 to Tip, Pin 3 to Ring, Pin 1 - Ground/Shield.

Q: 4. Will this work with my Zoom H5 and Saramonic WM2100 Lav mics?

A: Yes, the Rode VXLR Pro Transformer-Balanced 3.5mm TRS Female to XLR Male Adapter with Phantom-Power Converter can be used to make a hardwired connection between the lavalier microphones included in the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System and the Zoom H5 Portable Handy Recorder. The VXLR Pro will properly convert phantom power from the H5's XLR inputs down to the plug-in power voltage required by the lavaliers.

Q: 5. Will this cable work in Hollyland Lark Max transmitter? I'm using rode NTG4+ SHOTGUN MICROPHONE

A: Yes, the Kondor Blue Braided Female XLR to 3.5mm TRS Male Audio Cable could be used to connect an XLR microphone to a wireless transmitter, but any condenser microphone connected in this way would have to be battery-powered.

Q: 6. I need to connect a Rode Go ll to a mixer board. What do I need cables or adapters

A: You can use a standard cable with 3.5mm TRS male and XLR male connectors such as the Kopul Stereo Right-Angle 1/8" Male Mini-Jack to XLR Male Cable - 1.5' (B&H # KORSMXM015) to connect the Rode Wireless GO II Receiver to the input on a mixer. Another option is to use an XLR adapter with the 3.5mm TRS cable that is included with the Wireless GO II System. For the XLR adapter, you can use the Rode VXLR 3.5mm TRS Female to XLR Male Adapter (B&H # ROVXLR).

Q: 7. Does this work with my Tentacle Track E when connecting a Mic with a 48V supplied by BH #XVP1?

A: Yes, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable can be used with the Xvive Audio P1 Portable Phantom Power Supply and Tentacle Sync TRACK E Pocket Audio Recorder.

Q: 8. Will this cable work in Lark Max transmitter? I'm using rode NTG4+ SHOTGUN MICROPHONE

A: No, the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable is not compatible for use with the Hollyland LARK MAX wireless transmitter. The cable has a locking 3.5mm TRS connector and the transmitter uses a non-locking connector. As a better option, try the Remote Audio CASENSK100XMC48 XLR Female to Locking 3.5mm TRS Male Adapter Cable - 3' (B&H # KOXRSM03B) or any similar cable with a non-locking 3.5mm connector.

Q: 9. What happens to the -20 safety channel when the Rode VideoMic NTG is used with this "balanced" adapter?

A: When used with a standard unbalanced 3.5mm microphone cable, the Rode VXLR Pro's extra pin (used for inverted polarity audio signal in balanced devices) would be inert, but unbalanced audio is still passed through the balanced connection.

Q: 10. Will this work to connect a Deity V.Lav mic to the XLR input on a Zoom H6?

A: Yes it wll.