The NXT 910 4-Channel HDMI/SDI Frame Sync with HDCP from Ensemble Designs features frame synchronization and format conversion with 16 channels of embedded audio that allow to adjust levels and swap or mix channels. The NXT 910 has four HDMI video inputs and four HDMI independent frame synchronizers. You can adjust video and chroma gain with the built-in Proc Amp and use Color Correct to compensate for input material or to match projectors and monitors.

Web Interface with Video Proxies    Video Proc Amp and Color Correction    Audio Channel Swap and Level Adjust    SFP for HDMI, SDI, Fiber & Composite    Front-Panel Live Monitor    Monitor Pre- and Post-Processed Signals    Supports NTSC and PAL

SFP connections can serve as either Frame Sync inputs or outputs. Other connectors include SDI and HDMI inputs, SDI outputs, SFP modules to add Fiber, or encapsulated SDI (SMPTE 2020) connectivity.

Adjust incoming feeds to correct for color balance and video levels, or use the Color Corrector to match monitors and projectors. On-set monitors will have perfect color and exposure when viewed through studio cameras.

Adjust the level of all 16 possible embedded audio channels and map those channels to produce any combination of swaps and mixes on the output.

An extensive web interface puts complete control and full signal status at the operator's fingertips—from any computer, tablet, or smartphone. Proxy thumbnails of both the input and output of each frame synchronizer give a direct view of what's happening. Configure and control from across the room, or across the globe.

Connect the Monitor Output to an external waveform and picture monitor. This feed will follow the operator's channel selection on the front of the NXT. It can display either the input or output of each frame sync. This monitor switching is built-in to the regular operation of the product.

Related Questions and Answers

Q: 1. does the so605u work with Mac OS ?

A: Yes, the AVMATRIX VS0605U 6-Channel SDI/HDMI Multi-Format Streaming Switcher can be used with Mac and Windows computer platforms or stand alone.

Q: 2. Does this Unit allow you to scale or convert the SDI input for each out put and if so can it be done independently on each channel

A: it does not scale or convert resolutions. whatever is input is what will be displayed

Q: 3. Would this be appropriate for testing HDMI cables to ensure they are not damaged or bad? Would it give insight on cable quality?

A: Yes, the Kramer 4K HDMI 2.0 / HDCP 2.2 18 Gbps Signal Generator & Analyzer could work well for testing HDMI cables and getting an idea as to the quality of the cables being tested.

Q: 4. Which EMI/EMC certification does this device meet? And temperature range?

A: The operating temperature range of the DMON-16S is 0ºC to 40ºC and the storage temperature range is -20ºC to 45ºC. Please open the following link to view the Declaration of Conformity for Decimator Design. file:///C:/Users/decastro/AppData/Local/Microsoft/Windows/INetCache/Content.Outlook/6GTD8XI4/DMON-6S_CE.pdf

Q: 5. Can this do portrait (vertical) output?

A: The DECIMATOR DMON-16SL 16-Channel SDI Multiviewer with HDMI Output can not output a in a portrait (vertical) format.

Q: 6. Recording Codec ?

A: The recording format on the AVMATRIX Shark S6 6-Channel HDMI/SDI Video Switcher, is the MJPEG file format.

Q: 7. Is a stream key needed, or does this unit act as a webcam with the USB out? Thanks.

A: No stream key is needed for the AVMATRIX Shark S4 4-Channel 3G-SDI/HDMI Video Switcher to send a video signal through its USB output.

Q: 8. is it possible to have 5 inputs in the MW. one must be centered in the middle of MW?

A: Yes

Q: 9. 1. What happens when signal lost or disconnect one of the SDI input - does it show black on missing input or show some test patterns or solid color?2. Can we disable audio meters / file names / input names to have clean multi-view feed to monitor?

A: Got Answer from Chris.H (Thank you) B&H and Decimator The DMON-6S can be set up to either generate its own reference (free run) or use one of the inputs as a reference. If its set up to use free run or an input other than the one thats pulled then it will continue to show an output with just that window showing its background colour. The background colour can be selected in the USB Control Panel software, available free of charge for Windows and Mac. For the application your customer has described I would recommend setting it up so that Reference is set to Free Run nd background colour is set to black.You can remove all in picture overlays (audio meters, graticules, UMDs and status displays) from the multi-view output to show just the input sources.

Q: 10. I want to connect 4 PTZ cameras to this for the camera operator to view then loop each independent camera feed to a switcher. Can this do that?

A: Yes you can. Each input has an active loop output.