With built-in ergonomic shoulder pad, 10" sliding track, extra space for accessories in front, VCT14-compatible V-wedge, red buttons and levers all around, and much more, this is the stylish VCT Pro Baseplate from Zacuto. Use it with all types of cameras, from DSLRs to larger models, like the Alexa.

A section of the baseplate extends out beyond the 15mm LWS rod adapter in front. With the rod adapter thus set back, you have additional space to mount accessories under the camera lens, allowing you to position the camera further back on the plate, keeping the balance point of your rig directly over your shoulder. (The rod adapter is vertically adjustable 1", and has to be in a raised position to allow for accessories to be mounted in the additional space. Also, a 1.8" riser for the rod adapter is optionally available for RED cameras by special order from Zacuto.) Also, on the bottom of the section that protrudes out is where the V-wedge is. There is also a 15mm LWS rod adapter on the rear.

The VCT Pro Baseplate features a 10" sliding track, providing the space to optimally adjust balance after every lens change. Moreover, the included red camera plate can be loosened by a spring-loaded lever instead of a screw, so you can make adjustments quickly and easily. To fully release and remove the plate (and camera), just press a red button on the side of the baseplate and slide the plate out. The rod ports also have spring-loaded levers.

An ARRI M6 rosette is available on the front for attaching accessories and grips, and there are also three 1/4"-20 threaded holes on the side providing additional mounting options. 1/4"-20 and 3/8"-16 tripod mount holes are available on the bottom to use instead of the V-wedge. The shoulder pad runs pretty much along the entire length as well as width of the baseplate, and is made of gel polymer. Two 6.5" 15mm rods are included. One 1/4"-20 and one 3/8"-16 screw are supplied for the camera plate. The VCT Pro Baseplate is made in the USA.

Top Plate with Z-Rail for Canon C200 LCD    Rosette Trigger Grip    Zacuto Recoil Handle    VCT Pro Baseplate

• Front rod adapter is set far back, providing more space for accessories, and allowing the camera to be positioned further back for better balance
• 10" sliding track (with spring-loaded lever) for balance adjustment after lens changes
• VCT14-compatible V-wedge
• 1/4"-20 and 3/8"-16 tripod mount holes
• Ergonomic gel polymer shoulder pad
• 15mm LWS rod adapter on the rear
• Front rod adapter is vertically adjustable 1"; optional 1.8" riser available from Zacuto for RED cameras
• ARRI M6 rosette
• Three 1/4"-20 threaded holes for accessories
• Includes two 6.5" 15mm rods
• 1/4"-20 and 3/8"-16 screws supplied
• Made in the USA

Related Questions and Answers

Q: 1. Can this be used with the Panasonic EVA 1?

A: Yes, connection of the Zacuto Kameleon EVF Pro Kit will be via HDMA or SDI. HDMI DCI 4K UHD 4K 1080p 1080i 720p SDI 1080p 1080i 720p

Q: 2. Can this be adapted to work with the FS-7?

A: Yes, the included Zacuto LANC Extension Cable (13.8") is compatible with the Sony FS7.

Q: 3. Is this compatible with the C300 mark iii?

A: Yes, the Kameleon Pro is compatible with DSLRs, mirrorless, and cine-style cameras.

Q: 4. Does the top plate have threads to attach the stock shotgun mic mount or otherwise come with a mic mount?

A: Yes, the following Zacuto tactical handle features a built-in Z-Rail/NATO-type rail on top, a shoe mount, and multiple 1/4"-20 and 3/8"-16 mounting threads that enable you to mount a variety of accessories.

Q: 5. Can this be powered with something other than a large battery with Ptap? I want to use this with Canon's C70, but I don't want to have to carry around a big brick battery to power it.

A: No this can only be power via the P-tap

Q: 6. Would this work with the C100 MKI?

A: Yes, the Canon C200 Recoil Pro V2 is compatible with the Canon EOS C100 Digital Cinema Camera.

Q: 7. Does this come with a protective case? Mounts? Cables? What exactly comes in the package?

A: An order of the Zacuto Kameleon EVF Pro (BH #ZAZKEVFP) does not include a carrying case or cables. This listing is for the EVF only.

Q: 8. Does this unit come with an extension cable to plug the grip into the camera?

A: yes the grip extender contains the appropriate extension cable

Q: 9. What viewfinders can you use with the Axis Mini EVF Mount?

A: The Zacuto Axis Mini EVF mount is designed to work with Zacuto EVF models like https://bhpho.to/396pLfw

Q: 10. What's in the box?

A: This kit includes the VCT Pro Baseplate, FS7 Trigger Grip, LANC Extension Cable and Axis Mini for FS7.