The Dedicated L-Bracket for Nikon D850 and Battery Grip from Sunwayfoto is a single-piece design that is CNC machined from T6061 aluminum with a Type-III anodized finish for durability. The Arca-type compatible L-bracket can mount in both a vertical or horizontal orientation, and dual safety stops are located on the bottom of each axis as a precaution against the L-bracket from sliding out if the quick release clamp is partially opened by accident.

The camera mounts to the bracket via a 1/4"-20 male threaded screw, and the anti-twist lip on the plate prevents and minimizes any movement between the camera and the bracket. The camera's ports are completely accessible, and the 1/4"-20 mounting screw can loosen and readjust to allow the camera to slide up to 1.1" to make room for other cables. At the same time, the battery chamber and the tilting LCD screen are not blocked from being opened or to move freely about.

Single-Piece Design    Arca-Type Compatible Dovetails    Mounts Vertically and Horizontally    CNC Machined T6061 Aluminum    Type-III Anodized Finish    Anti-Twist Lip Prevents Movement    Dual Safety Stops on Each Axis    Maintains Camera Port and Battery Access    No Blocking of the Tilting LCD Screen    Slide-Adjusting Slot Design

Single-piece design with Arca-type compatible dovetails, which allow the bracket to mount in a vertical or horizontal orientation

CNC machined T6061 aluminum with a Type-III anodized finish for durability

Anti-twist lip on the plate prevents and minimizes any movement between the camera and the bracket

The bracket maintains camera port and battery access and also does not block the tilting of the LCD screen

Dual safety stops are located on the bottom of the bracket on each axis, which prevent the L-bracket from accidentally sliding out of the quick release clamp

Slide-adjusting slot design allows the bracket to slide away from the camera, allowing more room for cables

Related Questions and Answers

Q: 1. Will this work with a not MD-18 grip such as the Vellon etc?

A: Yes, it works with other grips.

Q: 2. Is the LCD screen still accessible (able to tilt fully)?

A: Yes the screen will be able to fully tilt, but the bracket has to be on the camera in the exact right position.

Q: 3. Does it work with RRS clamp?

A: Yes it does. This works with standard Arca style clamps such as the Really Right Stuff B2-LR-II Lever-Release Clamp (60mm), BH #REB2LRII.

Q: 4. Does this L bracket allow enough room for a power bank while shooting in vertical orientation?

A: The Sunwayfoto Dedicated L-Bracket for Nikon Z6 II and Z7 II Mirrorless Cameras connects to the 1/4"20 female thread at the bottom of the camera so there is not enough room for a power bank while shooting in vertical orientation.

Q: 5. is it possible to get a replacement camera screw - is it a widely available screw? I have almost reamed out the one for my Nikon D600 and am concerned I will do the same for this one

A: Here you go: Sunwayfoto Stainless Steel 1/4 QR Screw CS-1 Hex / Flat Slot for Tripod (5) B&H # SUCS15

Q: 6. Would this fit the R6 MkII?

A: The Sunwayfoto Dedicated L-Bracket for Canon EOS R5/R6 with Battery Grip will be compatible with the Canon EOS R6 Mark II Mirrorless Camera as the R6 and R6 II cameras have the same dimensions.

Q: 7. Does this bracket attach with screws at the upper left hand side where the camera strap attaches?

A: The Sunwayfoto PNL-Z8G L-Bracket for Nikon Z8 with Battery Grip has a screw opening at the top left where you can attach an arm to hold an accessory, as shown in this photo. https://bhpho.to/3YgmLnW

Q: 8. Is this L bracket compatible with the acratech standard clamp with screw? Will the index pin be able to slide in the bracket?

A: Sorry, I dont own Acratech clamps.

Q: 9. With the bracket on the camera are you able to put on and use an FTZ with F-mount lens?

A: Yes, the Sunwayfoto Dedicated L-Bracket for Nikon Z6 II and Z7 II Mirrorless Cameras allows you to use the FTZ adapter and an F mount lens on the camera while the bracket is also on the camera.

Q: 10. Can I use this with really right stuff ball head bh55

A: Yes you can, the Really Right Stuff BH-55 Ball Head accepts Arca Type Plates. This L-Bracket is Arca compatible. https://bhpho.to/2kSH1KF