Use the WC Pro Battery Plate from Wooden Camera to power your Digital Bolex, Blackmagic Studio, or Sony F55/F5 camera with a long-lasting V-mount battery. This plate has a right-angle 4-pin XLR connector and features three D-Tap accessory ports (12 to 16V), a digital fuse with a reset button, a rear cover plate, and captive mounting screws. The 16" cable on the right side of the plate provides a quick connection to your camera.

If the user exceeds the set current for accessories only the accessory outputs are disabled, leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again.

3 x D-Tap Accessory Outputs    Right-Angle 4-Pin XLR Connector    Digital Fuse with Reset Button    Rear Cover Plate    Captive Mounting Screws    16" Cable

Related Questions and Answers

Q: 1. Are there anything differences between this and the $165 Anton/Bauer 8075-0286 plate?

A: There is no functional difference between the Wooden Camera WC Gold Mount Battery Plate and the Anton Bauer plate.

Q: 2. The product photo shows IDX. Is this the same item as BH#IDPV2?

A: IDX does make this plate for Wooden Camera, but it is not the same product as BH#IDPV2. IDPV2 has a single D-Tap connection, this plate has a two D-Tap connections.

Q: 3. How do you attach this plate to the C400

A: The Wooden Camera WC Pro Battery Plate for Digital Bolex, Blackmagic Studio & Sony F55/F5 (V-Mount) would require a separate mount such as the SHAPE CP33 Multi-Purpose Mounting Cheese Plate, BH #SHCP33, to be mounted to. A battery mount that could mount directly on the back of the camera would be the Core SWX Battery Plate for Canon EOS Cine Cameras with 4-Pin XLR Input (V-Mount), BH #COCXVC3MK.

Q: 4. Will this attach directly to the 12K SSD drive? If so, what is the exact dimensions of the camera with both the SSD drive and this V mount plate attached?

A: It will attach onto the SSD Recorder, which features a passthrough cable for your camera’s battery power supply, so you can attach V-mount or gold mount batteries to the rear of the camera behind the recorder. Exact dimension specs are not provided by manufacturer at this time and we have no way of physically verifying this, since products are unavailable in our warehouse as of this writing.

Q: 5. Where are the D-tap outputs located?

A: On the Wooden Camera WC Gold Mount Battery Plate there are two D-Tap outputs, one on top and one on the side, (They cannot be seen in this photo.)

Q: 6. Is this compatible with the Panasonic EVA1?

A: When used in combination with our D-Tap to Sony FS7, FS5, Panasonic EVA-1 (Wooden Camera part number 194400) this plate is compatible. You may also look at our plate (part number 194200) which has the lead for the camera built in.

Q: 7. Will this battery plate mount on Axler Cheese Plate with 15mm Rod Bridge?Here is a link to that producthttps://a href= http://www.bhphotovideo.com/c/product/1311220-REG/axler_cp_815_15lws_15mm_cheesplate_with_clamp.html target= _blank www.bhphotovideo.com/c/product/1311220-REG/axler_cp_815_15lws_15mm_cheesplate_with_clamp.html/a

A: The plate you have referenced lacks the threaded mounting holes for V-mount and Gold Mount battery plates. To create a similar setup that would receive either plate style please instead review our Rod Clamp 15mm LW, and either the Bolt On Battery Mount or Battery Slide.

Q: 8. I don’t see a version for the C500 Mk ii. Is this the correct model?

A: The readon that you do not see a configuration for the C500 mkii for the Wooden Camera Unified Baseplate for C200/C200B/C700, is because there is not one currently available.

Q: 9. Will this attach to the Ursa 12K?

A: Yes, the Wooden Camera WC Pro Plate will fit onto the Blackmagic URSA 12K.

Q: 10. Would this work with the DK-H200?

A: The Wooden Camera Unified Baseplate for FS5, EVA-1, VariCam LT can accept the Hitachi DK-H200 Box Camera and Fujifilm XA20sX8.5BMD Standard Remote Control Lens Camera Package.