Use this Wooden Camera WC Pro Gold Mount to power your Sony FS7/FS7 Mk II, FS5, EX3, or Panasonic EVA1 camera and select accessories using a longer-lasting Gold mount battery. Connecting to the camera via a 15" DC plug cable, this plate features three D-Tap ports (12 to 16V) and a digital fuse with a reset button.

In case the total accessory draw should exceed the set current, this intelligent plate protects your camera by shutting down the accessories while leaving the camera running. After reducing or reconfiguring the accessory load, use the reset button to repower the accessories. The WC Pro Gold mount features a durable aluminum build and captive mounting screws.

Camera & Accessory Power Plate    15" DC Plug Connection to Camera    For Sony FS7/FS5 & EX3, Panasonic EVA1    Uses Long-Lasting Gold Mount Battery    3 x D-Tap Accessory Ports (12-16V)    Digital Fuse with Reset Button    Disables Accessories in Case of Overload    Captive Mounting Screws

• Panasonic AU-EVA1
• Sony PXW-FS7, FS7 Mk II, FS5
• Sony EX3

• Powers camera and accessories via long-lasting Gold mount battery
• Three D-Tap accessory ports
• Digital fuse with reset button
• In case of overload, accessories are disabled while the camera continues to run
• Aluminum build, captive mounting screws

Related Questions and Answers

Q: 1. Does this have anyway of mounting it to a Sony PXW FS7 MK 2 without having to use rails?

A: As per the illustration in the 3rd image on the listing for the Wooden Camera Battery Plate for Sony FS5/FS7/FS7 Mk II & Panasonic EVA-1, you can see that a 15mm rod attachment is require for mounting this to a camera's rig.

Q: 2. Does this provide regulation for the power coming from the battery?

A: David, Yes, the the V-Mount Battery Plate will provide the necessary regulation for the camera. Thanks, Wooden Camera

Q: 3. Can this power Sony PXW Z190 ?

A: There is no support information saying this plate with the Sony PXW Z190.

Q: 4. How many D-taps does this plate have?

A: There are 3 D-taps on the Wooden Camera - WC Pro Gold Mount (Blackmagic URSA Mini, URSA Mini Pro, URSA).

Q: 5. Yo does this include screws necessary to attach to the IDX cheese plate? Thanks!

A: Yes, the necessary hardware is included to mount the battery plate to an IDX cheese plate.

Q: 6. Does this include the 15mm rod hardware shown in the photo?

A: no

Q: 7. Will this IDX V mount battery plate work with the SmallRig Battery Back (1547) that has the capability to mount onto 15mm rods?

A: Yes, this should work well with the SmallRig 1547 Battery Back with 15mm LWS Bracket, BH #SM1547.

Q: 8. Will the stated 18mm center-to-center distance for this piece allow me to mount it on the side of a Zacuto EVA1 top plate?

A: Hi Thomas, I believe we are speaking via email as well. 18mm center to center is an established standard so it should fit, but please confirm with the manufacturer. You may follow up by replying to my email if you have further questions.

Q: 9. What kind of cable do I need to plug in a Blackmagic Design Video assist monitor 7" 12G from the 12V jack on this Jbox? I found one that has the same DC connector on both ends. One end fits fine into the Jbox, but the other end is not the screw on type plug needed for the Blackmagic Design. It works, but it easily falls out if you don't have the screw on end for the Blackmagic Design monitor. I can't find a cable like that anywhere.

A: We would recommend using a Dtap expander. https://bhpho.to/3LuidS3 and the following dummy battery cable https://bhpho.to/37RfDH3 to power the Video Assist and the EVA1 at the same time.

Q: 10. Does this mount regulates power output to 12v?

A: Hi Taras, this Pro Gold Mount has a special Molex connector that attaches directly to back of Blackmagic URSA and is covered by the plate, therefore eliminating external cabling. It will pass the required 12V of power to the camera for proper operation. The integrated D-Taps on the battery plate will provide unregulated power (12V-16V) for additional accessories.