The Wooden Camera Pass-Through Top Plate for RED DSMC2 Cameras attaches to the top of your DSMC2 camera using four captive screws and provides additional accessory mounting points. The plate also incorporates the 26-pin LCD and 3-pin trigger connections, passing the signals through to the camera connections. This allows you to mount your RED LCD monitor and Trigger Grip as you would on your camera without the plate while providing multiple threaded accessory mounting points.

The plate incorporates 61 threaded 1/4"-20 mounting holes along the edges and top, as well as two 3/8"-16 threaded holes and 4 x 3/8"-16 threaded mounting holes with ARRI Anti-Twist divots. An additional two 3/8"-16 threaded mounting holes are reserved for use by the LCD connector. The Top Plate is vented, allowing air from your camera's top fans to pass without obstruction.

For DSMC2 BRAINS, WEAPON & RAVEN    Riser Plate & Pass-Through Top Plate    15mm LWS Bracket & 2 x 6" Rods    8" Dovetail & ARRI-Style Bridge Plate    Trigger Handle, A-Box XLR Audio Adapter

Related Questions and Answers

Q: 1. Are these accessory rails compatible with nato clamps?

A: Yes, the Wooden Camera Mini Accessory Rail Kit is compatible with NATO clamps.

Q: 2. does this cover fit on the Dragon-x DSMC2 6k camera?

A: Yes, The Wooden Camera Right Side Plate would work since your camera is a DSMC2 compatible camera.

Q: 3. Does this Side plate have enough space to mount both the Wooden Hand Grip and a TC Generator like the Lockit?

A: When the Wood Hand Grip is installed, the grip itself sits about an inch out from the Right Side Plate. Depending on any mounting points on the TC Generator, and how thick it is, there may be enough clearance to attach it to the Right Side Plate, above the Rosette Mount.

Q: 4. Will this work with a phantom powered mic and a camera that provides +48v power to the mic via the 3.5 jack, like the GH6?

A: The Wooden Camera A-Box for RED KOMODO, WEAPON, EPIC-W, SCARLET-W, RAVEN, and DSMC2 does not provide phantom power. This adapter does not provide phantom power and the RED® Base Expander Module is a required item (not included).

Q: 5. Does it replace the original Red DSMC2 V-Lock Expander?

A: This battery plate can be used instead of the RED battery module with the RED base expander. You can connect this battery plate directly to the body if you do not wish to have IO ports from the expander module.

Q: 6. does this work with Komodo?

A: Yes it does. Wooden Camera lists this as compatible with the Komodo as well.

Q: 7. Does this plate communicate battery info to the brain so the user can tell how much juice the battery has left?

A: Yes.

Q: 8. Will the top mount for the handle and accessory work with the Red Outrigger handle?

A: Unfortunately not, neither allow for mounting of the other.

Q: 9. Can this be used with a RED dragon x placing it on the easy riser adaptor to mount on the 15mm rods a matte box and follow focus at the correct height?

A: No. This product does not provide clearance for the Dragon fan. Please instead use the original 15mm LW Bracket. WC part number 148100.

Q: 10. How is the quality with DSMC2 expander?

A: This device is a simple passive adapter (no Pre-Amp of Line level output) to allow easy use of XLR cables on the RED via the 3.5mm stereo connection. There is no reduction in audio quality from the XLR to the 3.5mm.