This 1 x 2' Westcott Flex Cine Daylight Mat produces 3800 lux of daylight-balanced light with a nominal beam angle of 140°. This flexible mat features hook-and-loop fabric edging, as well as grommits for mounting, and it incorporates magnetic metal-capped corners allowing you to easily mount it on virtually any metallic surface. The flexible design enables you to shape the mat so that it produces a beam angle from 360° when rolled into a cylinder, to 140° when laid out flat.

The daylight color temperature makes a good match when shooting exteriors, or interiors with daylight sources, while the high CRI and TLCI provides excellent color reproduction. The mat is capable of producing flicker-free output from 1 to 100% of its brightness when connected to a Flex Cine Wireless Dimmer (not included). For the mat to function you will need to connect it to a Flex Cine Wireless Dimmer, and power it with a 26V V-mount battery or power supply.

Panel Surface Area: 12 x 24"    140 to 360° Beam Spread    5600K Color Temperature    CRI 96, TLCI 96    1 to 100% Flicker-Free Brightness

The Flex Cine Mat features hook-and-loop fabric, grommets, and metal-capped corners that are magnetic, which can all be used for mounting (Optionally a yoke and flex mount are available separately)

Reinforced mounting points and a reinforced cable mount compared to previous Westcott flexible LED mats extend the life of the Flex Cine Mat

This flexible mat can be shapped to fit into tight spaces

It features an IP64 rating

3800 lux at just over 3'

Related Questions and Answers

Q: 1. Will this dimmer work with IDX or other V-Mount batteries?

A: You can use IDX V mount batteries as well as other manufacture V mount batteries.

Q: 2. How can I change the color temperature? I can change brightness with the left and right arrows but the up and down arrows don't seem to do anything.

A: This particular mat is daylight only. For additional customer service, please call our customer service team at 419-243-7311 anytime between Monday-Friday 9am-5pm EST.

Q: 3. Will the European Adapter be included for working with the European Current?

A: Yes, but the U.S models will need a euro adapter in order to function. Watson 3-Prong USA to 2-Prong Europe Power Adapter Plug BH #WATAGUSAE • MFR #TAG-USA-E https://www.bhphotovideo.com/c/product/1303171-REG/watson_tag_usa_e_3_prong_usa_to_2_prong.html?sts=pi

Q: 4. It says in the description that it is a full stop but the review says 1/4 stop diffusion. Which is it?

A: Westcott lists that the Westcott Flex Cine Softbox 1 x 1' comes with a one stop front diffuser.

Q: 5. Will this unit also ship with an Anton Bauer Gold Mount version?

A: No it will not.

Q: 6. Can I use the Anton Bauer Cine battery to power the Flex 10 x 10 with this cable?

A: From our in-house engineer: Yes, as long as the output is between 13v and 29v it can power your 10 x 10 flex.

Q: 7. Can the dc plug fit into a Video Device PIX-e7?

A: As far as I know, this is a proprietary plug for the Flex light.

Q: 8. Can I convert this 8x8 scrim jim frame in a 4x4 frame, right? and buy separatly a 4x4 wescot fabric?

A: Yes!

Q: 9. do I need a clamp or there is some 3/8 female thread on the middle of the frame?

A: There are 3/8 female thread on them. Id suggest ordering the Matthelini clamps and then attaching them to c stands. This is the route I went with and it works great.

Q: 10. I have two Flex light Cine Kits... One 1x1 and one 1x2. I have two D-Tap connectors (one for each). NEITHER cable works on either light. There's power to the 1x2 control unit, but will not light the light. There's no power to the 1x1 control unit. Ideas?? Thank you!

A: For color temperature of LEDs you would need the Sekonic C-700R Spectromaster or a spectrometer specifically designed to accurately read LED light. Other versions and older color meters simply are not designed to accurately measure the light output of LEDs. In addition, While the actual readout from a Flex LED may be different than the what your brand and model of camera records as a specific temperature, once set, your Flex will maintain the same color temperature each time you set it with the same readout. Your output range may be related to the D-tap question where you appear to be attempting to use powering options and connectors not specifically designed for use with your Flex. Please contact Westcott Customer Service if you experience issues beyond what I addressed as we stand behind our products and their performance.