The 247 Minus Green Filter from LEE Filters can be applied over a discharge lighting fixture that exhibits a green cast. This filter can help reduce the green cast from the lighting fixture's output and its effect is approximately equivalent to a CC30 magenta camera filter.

Under 3200K tungsten light, the 247 Minus Green Filter exhibits a 0.22 density and transmits light at 60%. Under 6774K Source C light, this filter exhibits a 0.24 density and transmits light at 57.8%. It is constructed from polyester that is heat resistant to 356°F and is delivered as a 48" x 25' roll on a 1" core.

Removes Green Cast from Discharge Lights    Approximates CC30 Magenta Camera Filter    0.22 Density for 3200K Tungsten    60% Light Transmission for 3200K    0.24 Density for 6774K Source C    57.8% Light Transmission for 6774K    Heat Resistant to 356°F    Polyester Construction

Related Questions and Answers

Q: 1. Does it comes in pairs?

A: Correct. This is a pair of replacement fasteners.

Q: 2. will it fit my 82 mm lens?

A: It fits the 150x150 mm bracket. I use it on my Nikon 14-24 lens with a special multi-piece holder that screws around the lens. It works great and the filters are not light leak proof without it. I do not think this shield works with a normal filter holder that screws to the front of a lens because it is designed to fill the gap caused by the 14-24 lens fixed front shield.

Q: 3. 1) Can the padding be removed? 2) If so, what is interior thickness of the case without the padding? 3) Will an adapter ring fit inside the case without removing the padding? 4) Is the padding on the top and bottom? 5) Is the case hinged?

A: the padding is adhesive glued in the case , interior thickness is about 18 mm. you can put in a adapter ring up to 77 mm , yes the padding is on top and bottom ,and it is not hinged .

Q: 4. What is 720 Durham Daylight Frost used for?

A: That cools the color temperature of tungsten while softening as well.

Q: 5. Will this fit a Nikon 24-70 2.8 lens?

A: Yes, it will fit.

Q: 6. I have an amaran 672s and was wondering how these would work with the light. Do they slide down between the front cover and the light itself? Do they somehow adhere? Thanks for the help.

A: The following Gels can be gaffers tapped to the frame of the Amaran 672. For a clean install we suggest the following. Impact Universal Filter Holder - 12x12" (30.5 x 30.5 cm) B&H # IMUFHQ MFR # 3312-MK2 https://bhpho.to/3kVKJ3C

Q: 7. Can the adapter rings for LEE85 system be used with the LEE Seven5 system (already expired) ?

A: Unfortunately no, the Lee Seven5 holder will not fit the 85mm adapter.

Q: 8. What's the difference between this and SKU 216RW ?

A: 216RW is the standard core size. This one has a smaller 1" core. The filter is the same density and size.

Q: 9. can these be used to warm up par 38 led bright white floods?

A: Yes these CTO filters can be used to warm an LED light source with a cooler color temperature.

Q: 10. can these be used on a 650w or 1000w tungsten fresnel light?

A: Yes you can if you attach it to the barn doors