The 248 Half Minus Green Filter from LEE Filters can be applied over a discharge lighting fixture that exhibits a green cast. This filter can help reduce the green cast from the lighting fixture's output and its effect is approximately equivalent to a CC15 magenta camera filter.

Under 3200K tungsten light, the 248 Half Minus Green Filter exhibits a 0.15 density and transmits light at 71%. Under 6774K Source C light, this filter exhibits a 0.14 density and transmits light at 72%. It is constructed from polyester that is heat resistant to 356°F and is delivered as a 48" x 25' roll on a 1" core.

Removes Green Cast from Discharge Lights    Approximates CC15 Magenta Camera Filter    0.15 Density for 3200K Tungsten    71% Light Transmission for 3200K    0.14 Density for 6774K Source C    72% Light Transmission for 6774K    Heat Resistant to 356°F    Polyester Construction

Related Questions and Answers

Q: 1. I have an amaran 672s and was wondering how these would work with the light. Do they slide down between the front cover and the light itself? Do they somehow adhere? Thanks for the help.

A: The following Gels can be gaffers tapped to the frame of the Amaran 672. For a clean install we suggest the following. Impact Universal Filter Holder - 12x12" (30.5 x 30.5 cm) B&H # IMUFHQ MFR # 3312-MK2 https://bhpho.to/3kVKJ3C

Q: 2. Is there any information available on transmittance/absorption as a function of wavelength for this product? I would like to know how it affects CRI and CCT.

A: Since the Cinefoil is opaque and is intended for use as a masking product, the transmission would be zero. While Rosco lists the transmission/absorption on their site, it would be limited to color filters only.

Q: 3. Do those filters compatible with aputure light dome II ?

A: Yes they are fully compatible

Q: 4. Is the padding inside the same as what is in the case that comes with the big stopper?

A: Yes it is.

Q: 5. Will this fit a Nikon 24-70 2.8 lens?

A: Yes, it will fit.

Q: 6. What is 720 Durham Daylight Frost used for?

A: That cools the color temperature of tungsten while softening as well.

Q: 7. What's the difference between this and SKU 216RW ?

A: 216RW is the standard core size. This one has a smaller 1" core. The filter is the same density and size.

Q: 8. can these be used to warm up par 38 led bright white floods?

A: Yes these CTO filters can be used to warm an LED light source with a cooler color temperature.

Q: 9. I have a Nikon D5300 with a 52mm lens. Does the adapter ring go on my lens and then the filter holder is attached to the ring? How is the polarizer attached to the filter holder, is it magnetic or does it go in a slot?

A: Yes, the LEE Filters 52mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder, B&H # LEARWA52, included in the above LEE Filters 52mm Wide-Angle Adapter Ring with LEE100 Filter Holder would screw into the 52mm filter threads on the front of your lens. The filter holder would then attach to the filter ring. The LEE Filters LEE100 Polarizer Filter, B&H # LE100PL, would be a polarizer filter that snaps directly onto a LEE100 Filter Holder's guide blocks without occupying a filter slot. As an alternative, the LEE Filters 105mm Polarizer Ring for LEE100 Filter Holder, B&H # LE100PLR, is a snap-on adapter ring that allows you to use a polarizer filter with 105mm filter threads on the filter holder. https://bhpho.to/3ixgBNQ https://bhpho.to/3GRraET

Q: 10. Is this filter preferred for capturing sunrises as opposed to reverse grad. filter? Going to Yellowstone NP 1.5 weeks.

A: LEE Filters LEE100 Landscape Kit has a regular graduation. For sunrise and sunset where the sun is on the horizon and the top of the sky is dark a reverse grad will be better.