The 245 Half Plus Green Filter from LEE Filters can be applied over a daylight or tungsten light fixture to purposely add a green cast to its output. This is useful for achieving consistency when using such light fixtures with discharge lighting that exhibits a green cast. The effect of the 245 Half Plus Green Filter is approximately equivalent to a CC15 green camera filter.

Under 3200K tungsten light, the 245 Half Plus Green Filter exhibits a 0.09 density and transmits light at 81.6%. Under 6774K Source C light, this filter exhibits a 0.09 density and transmits light at 81.7%. It is constructed from polyester that is heat resistant to 356°F and is delivered as a 48" x 25' roll on a 1" core.

Adds Green Cast to Tungsten or Daylight    Consistency with Green Discharge Lights    Approximate to CC15 Green Camera Filter    0.09 Density for 3200K Tungsten    81.6% Light Transmission for 3200K    0.09 Density for 6774K Source C    81.7% Light Transmission for 6774K    Heat Resistant to 356°F    Polyester Construction

Related Questions and Answers

Q: 1. Will this fit on a Sigma 20mm Art lens for Nikon?

A: I'm sorry, no, the lens has no filter threads. You will need to get a filter system specifically for this lens. Click the link below to view; https://bhpho.to/38uBbFp

Q: 2. Are the filters marked as 1/8, 1/4, 1/3, 1/2, 3/4 and full CTB? If not is it clear that these values are included in this collection?

A: The gels are marked with a label. Included in the kit are: 2 x 720 Durham Daylight Frost 2 x 203 Quarter CT Blue 2 x 201 Full CT Blue 2 x 218 Eight CT Blue 2 x 202 Half CT Blue 2 x 200 Double CT Blue

Q: 3. Will this fit on a Nikon 24mm f/1.8G wide angle lens?

A: Yes, it will, but with the LEE100 kit you'll need to buy the appropriate lens adapter ring for your lenses (it's not included). The one you need for the Nikon 24mm f/1.8G ED lens is the Lee 72mm wide-angle lens adapter: https://bhpho.to/3C7bETu

Q: 4. Can the adapter rings for LEE85 system be used with the LEE Seven5 system (already expired) ?

A: Unfortunately no, the Lee Seven5 holder will not fit the 85mm adapter.

Q: 5. Will this fit on my Sigma 24-70 lens?

A: Yes, the Lee 100 Landscape Kit will fit a Sigma 24-70mm f/2.8 Lens by adding the LEE Filters 82mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder, BH # LEARWA82. https://bhpho.to/3CVvrG1

Q: 6. will it fit my 82 mm lens?

A: It fits the 150x150 mm bracket. I use it on my Nikon 14-24 lens with a special multi-piece holder that screws around the lens. It works great and the filters are not light leak proof without it. I do not think this shield works with a normal filter holder that screws to the front of a lens because it is designed to fill the gap caused by the 14-24 lens fixed front shield.

Q: 7. Is there any information available on transmittance/absorption as a function of wavelength for this product? I would like to know how it affects CRI and CCT.

A: Since the Cinefoil is opaque and is intended for use as a masking product, the transmission would be zero. While Rosco lists the transmission/absorption on their site, it would be limited to color filters only.

Q: 8. Is this filter preferred for capturing sunrises as opposed to reverse grad. filter? Going to Yellowstone NP 1.5 weeks.

A: LEE Filters LEE100 Landscape Kit has a regular graduation. For sunrise and sunset where the sun is on the horizon and the top of the sky is dark a reverse grad will be better.

Q: 9. I have a Nikon D5300 with a 52mm lens. Does the adapter ring go on my lens and then the filter holder is attached to the ring? How is the polarizer attached to the filter holder, is it magnetic or does it go in a slot?

A: Yes, the LEE Filters 52mm Wide-Angle Lens Adapter Ring for 100mm System Filter Holder, B&H # LEARWA52, included in the above LEE Filters 52mm Wide-Angle Adapter Ring with LEE100 Filter Holder would screw into the 52mm filter threads on the front of your lens. The filter holder would then attach to the filter ring. The LEE Filters LEE100 Polarizer Filter, B&H # LE100PL, would be a polarizer filter that snaps directly onto a LEE100 Filter Holder's guide blocks without occupying a filter slot. As an alternative, the LEE Filters 105mm Polarizer Ring for LEE100 Filter Holder, B&H # LE100PLR, is a snap-on adapter ring that allows you to use a polarizer filter with 105mm filter threads on the filter holder. https://bhpho.to/3ixgBNQ https://bhpho.to/3GRraET

Q: 10. I have an amaran 672s and was wondering how these would work with the light. Do they slide down between the front cover and the light itself? Do they somehow adhere? Thanks for the help.

A: The following Gels can be gaffers tapped to the frame of the Amaran 672. For a clean install we suggest the following. Impact Universal Filter Holder - 12x12" (30.5 x 30.5 cm) B&H # IMUFHQ MFR # 3312-MK2 https://bhpho.to/3kVKJ3C