The 814 Zircon Warm Amber 9 Filter from LEE Filters can be applied over a warm white LED lighting fixture with a minus green correction. While in use, this filter can correct the lighting fixture's output with a fine warming effect and a mired shift value of +51.

Under 6300K light, the 814 Zircon Warm Amber 9 Filter exhibits a 0.13 density and transmits light at 74%. This filter is constructed from 180-micron polyester that resists fading from LED light fixtures and is delivered as a 4 x 10' roll. Depending on the specific LED lighting fixture the 814 Zircon Warm Amber 9 Filter is used with, the precise color temperature shift may vary.

For Warm White LED Light Fixtures    +51 Mired Shift Value    0.13 Density for 6300K    74% Light Transmission for 6300K    Fade Resistant    180-Micron Polyester Construction

Related Questions and Answers

Q: 1. Does this gels work good on 2K or 3K Watt lights?

A: Noooooo! Don't use these gels on any tungsten lights 1K and up. I made a mistake one time and it burned right through a 1K arri. :/

Q: 2. Are the filters marked as 1/8, 1/4, 1/3, 1/2, 3/4 and full CTB? If not is it clear that these values are included in this collection?

A: The gels are marked with a label. Included in the kit are: 2 x 720 Durham Daylight Frost 2 x 203 Quarter CT Blue 2 x 201 Full CT Blue 2 x 218 Eight CT Blue 2 x 202 Half CT Blue 2 x 200 Double CT Blue

Q: 3. can these be used on a 650w or 1000w tungsten fresnel light?

A: Yes you can if you attach it to the barn doors

Q: 4. Is this fireproof?

A: No, the LEE Filters Quick Location Pack - 24 Sheets (10 x 12") listed above are not fireproof. According to LEE Filters, they state that their standard gels are "heat resistant" to 180° degrees Centigrade (356° Fahrenheit). The filters should be used at a slight distance from halogen, tungsten, and some high-intensity LED lamps, but may eventually melt and will require occasional replacement.

Q: 5. How thick are these gels? I'm looking for something that's about 2mm thick that has some stiffness to it. My application is to use them on submerged LED lights for fountain uplighting, cut them to size (2.5" dia.) and velcro them over the lens. Any advice? Thanks.

A: These filters are soft paper thin

Q: 6. can these be used to warm up par 38 led bright white floods?

A: Yes these CTO filters can be used to warm an LED light source with a cooler color temperature.

Q: 7. What is 720 Durham Daylight Frost used for?

A: That cools the color temperature of tungsten while softening as well.

Q: 8. Can I used it for hot lights or studio strobes (wrapping around the bulb)?

A: You can but not attaching right near the bulb.

Q: 9. Is this fire proof?

A: These gels would not be fire proof. Sufficient air space between the gel and the light would be needed.

Q: 10. how thick?

A: Its about the thickness of a couple of pieces of paper.