Canon 10 22Mm Lens

Axis Communications T90d20 Ir Led Illuminator (ac/dc Power)

Product Code: ga62192
Availability: In Stock

$1,437.00 $2,141.13

Qty

0 reviews Write a review

Description
Reviews (0)

The T90D20 IR LED Illuminator from Axis Communications provides IR light for night vision cameras. Featuring a wavelength of 850nm, the illuminator has a range of up to 472' with its pre-mounted 10° lens. Diverging lenses that provide 35, 60, and 80° beam angles are included, and a 120° lens is available separately. The AC/DC-powered T90D20 can be installed on different mounts including walls, ceilings, and poles, and is IP66 rated for outdoor use.

AC/DC Power 850nm Wavelength 10, 35, 60, & 80° Lenses Included IR Range up to 472' IP66 Rated for Outdoor Use

Parameters
Compatibility	Axis Cameras with IR Cut Filter
Wavelength	850 nm Semi-Covert
IR Range	With Standard Lens 10 x 10°: 472' / 144 m With Diverging Lens 35 x 10°: 256' / 78 m With Diverging Lens 60 x 25°: 177' / 54 m With Diverging Lens 80 x 30°: 118' / 36 m With Optional Diverging Lens 120 x 50°: 79' / 24 m
Angle	Without Diverging Lenses: 10° With Diverging Lenses: 35, 60, 80, and 120°
Control Technology	Through Integrated Push Buttons or Remote Control Power Level, Photocell Sensitivity, Telemetry Link for Remote Activation, and Timer
Power	Power Input: 12 to 24 VAC/VDC AC Frequency: 50 to 60 Hz Maximum Light: 18 W Standby Mode: 0.3 W
Casing	Aluminum and Polycarbonate
Mounting Options	Wall, Ceiling, Pole, and Fixed Box Camera Housing
Operating Temperature	-28 to 122°F / -50 to 50°C
Storage Temperature	-28 to 158°F / -50 to 70°C
Operating Humidity	10 to 100% RH
Approvals	EMC: FCC Part 15.107 and 15.109 Class B, ICES-003 Issue 6 Class B, EN 55032 Class B, RCM AS/NZS CISPR 32 Class B, VCCI Class B, EN 55015, EN 55024, EN 50130-4, EN 61547 EMC AC/DC Variant: KCC KN15, KN 61547 Safety: IEC/EN 60598-1, IEC/EN 62471 (risk group 2), C22.2 No 250.0-08, UL 2108 Environment: IEC/EN 60529 IP66, IEC/EN 62262 IK09
Dimensions	4.0 x 5.0 x 2.5" / 100 x 135 x 66 mm Cable Length: 8.2' / 2.5 m
Weight	2.11 lb / 950 g
Packaging Info
Package Weight	3.16 lb
Box Dimensions (LxWxH)	10.2 x 6.5 x 4.7"

Low power consumption

Flexible angle of illumination

Easy setup by remote control

Power adjust and telemetry control

Related Questions and Answers

Q: 1. What is the size of the DC barrel plug? Is it 5.5mm (outer) 2.5mm (inner)? I cannot seem to find this info anywhere.

A: Dracast lists the powersupply for specific models of light and does nto list the size or type of connector.

Q: 2. Will this adapter work well with the edelkrone JibONE v1?

A: Yes, the edelkrone AC/DC Adapter powers the following devices: HeadPLUS, DollyPLUS, and All JIBONE Versions. It also Supports the following modules::Motor Module for SliderPLUS, Pan Module for JibONE, Focus/Zoom Module for HeadPLUS, Vision Module for HeadPLUS

Q: 3. How long will the battery last while continuously on?

A: The battery is rated for 45 minutes.

Q: 4. Is the AC power adapter/charger only 120v 60hz or 120/240 50/60 hz?

A: The AC power supply/charger for the Interfit Badger Beam 60W AC/DC LED Monolight is 100-240V compatible.

Q: 5. Is this the correct power adapter for my Marshall distortion foot pedal?

A: It would be helpful to know which model your Marshall distortion pedal is so we can check the power requirements to confirm whether this adapter is compatible. The Planet Waves adapter is for effects pedals that use a 9V power supply with a 2.1mm negative tip barrel plug and require a maximum of 500mA.

Q: 6. I ordered this and I can not figure out how to plug it into the outlet. The photo shows teeth protruding but my adapter has two tiny teeth that are not long enough to plug into the wall. They extend maybe a quarter inch away from the adapter's body. Am I missing something?

A: It sounds like you might be missing the blade adapter that will allow you to plug it into the wall. Please contact support@ikancorp.com for further assistant.

Q: 7. Is this power adapter the correct one for my Marshall distortion foot pedal?

A: What model pedal do you have? This will power a pedal needing 9V DC and less than 500 mA of input power with a negative tip/center positive polarity. This will work with a lot of different pedals, but not all. You'll want to check the specs to be sure. For further assistance please contact us at sales@bhphoto.com or call us at 1-800-606-6969.

Q: 8. What is the brightness?

A: The brightness of this LED COB light, the Interfit Badger Beam 60W AC/DC LED Monolight (B&H# INHBB60), is listed as being 609.4 fc / 6560 Lux at 3.3' or 1m. That's going to be similar to the brightness cast upon an area by a 300W traditional tungsten bulb. However, that will vary by the bulb.

Q: 9. Will this plug work to my couch?

A: The edelkrone AC/DC Adapter for Pan PRO is designed for Edelkrone products. If your couch happens to accept a 2.1mm x 5.5mm barrel connection with 9 volts and 2.2 amps, then it is something to consider.

Q: 10. How called the blade adapter to buy for EU outlet? I found Apd-Eu adapter but is it compatible?

A: You could use the QVS International Power Adapter Plug Kit (Black)(BH #QVPAC4B • MFR #PA-C4BK) as a wall outlet adapter for the ikan AC/DC Adapter for Onyx 240 On-Camera LED Light (US). See: https://bhpho.to/481wQaI

There are no reviews for this product.