Garmin Dash Cam 35 Lens Angle

Axis Communications T90d25 White Led Illuminator (ac/dc Power)

Product Code: ga62196
Availability: In Stock

$1,437.00 $1,997.43

Qty

0 reviews Write a review

Description
Reviews (0)

The T90D25 White LED Illuminator from Axis Communications provides 1863 lumens of light that can be triggered by connected network cameras. It has an LED range of up to 361' with its pre-mounted 10° lens. Diverging lenses that provide 35, 60, and 80° beam angles are included, and a 120° lens is available separately. The AC/DC-powered T90D25 can be installed on walls, ceilings, and poles, and is IP66 rated for outdoor use.

AC/DC Power 1863 Lumens 10, 35, 60, & 80° Lenses Included LED Range up to 361' IP66 Rated for Outdoor Use

Parameters
Compatibility	Axis Network Cameras
Type	6000 K Luminous Power: 1863 Lumens
IR Range	With Standard Lens 10 x 10°: 361' / 110 m With Diverging Lens 35 x 10°: 213' / 65 m With Diverging Lens 60 x 25°: 115' / 35 m With Diverging Lens 80 x 30°: 82' / 25 m With Optional Diverging Lens 120 x 50°: 59' / 18 m
Angle	Without Diverging Lenses: 10° With Diverging Lenses: 35, 60, 80, and 120°
Control Technology	Through Integrated Push Buttons or Remote Control Power Level, Photocell Sensitivity, Telemetry Link for Remote Activation, and Timer
Power	Power Input: 12 to 24 VAC/VDC AC Frequency: 50 to 60 Hz Maximum Light: 24 W Standby Mode: 0.3 W
Casing	Aluminum and Polycarbonate
Mounting Options	Wall, Ceiling, Pole, and Fixed Box Camera Housing
Operating Temperature	-28 to 122°F / -50 to 50°C
Storage Temperature	-28 to 158°F / -50 to 70°C
Operating Humidity	10 to 100% RH
Approvals	EMC: FCC Part 15.107 and 15.109 Class B, ICES-003 Issue 6 Class B, EN 55032 Class B, RCM AS/NZS CISPR 32 Class B, VCCI Class B, EN 55015, EN 55024, EN 50130-4, EN 61547 Safety: IEC/EN 60598-1, IEC/EN 62471 (Risk Group 2), C22.2 No 250.0-08, UL 2108, UL 8750 Environment: IEC/EN 60529 IP66, IEC/EN 62262 IK09
Dimensions	4.0 x 5.0 x 2.5" / 100 x 135 x 66 mm Cable Length: 8.2' / 2.5 m
Weight	2.11 lb / 950 g
Packaging Info
Package Weight	3.175 lb
Box Dimensions (LxWxH)	9.9 x 6.1 x 4.6"

Low power consumption

Flexible angle of illumination

Designed for easy setup by remote control

Power adjust and telemetry control

Related Questions and Answers

Q: 1. I'm looking for a continuous power adapter for the Dracast DR-CAML-MaxB. Will the single female connector fit? Is it like a laptop computer power tip? All other power requirements look like it would match.

A: There is non available from Dracast, we can't advise on one as it might burn out your light

Q: 2. How long will the battery last while continuously on?

A: The battery is rated for 45 minutes.

Q: 3. How called the blade adapter to buy for EU outlet? I found Apd-Eu adapter but is it compatible?

A: You could use the QVS International Power Adapter Plug Kit (Black)(BH #QVPAC4B • MFR #PA-C4BK) as a wall outlet adapter for the ikan AC/DC Adapter for Onyx 240 On-Camera LED Light (US). See: https://bhpho.to/481wQaI

Q: 4. Will this work with my Zoom 3030 and my Zoom GFX-707 effects pedals?

A: Yes, the Planet Waves PW-CT-9V Regulated AC-DC 9V Power Adapter is compatible for use with the Zoom Player 3030 Multi-effects Processor and the Zoom GFX-707 Guitar Effects Processor Pedals. The PW-CT-9V has the same power rating as the Zoom AD-16 9V Power Supply Adapter For Zoom Effects Pedals (B&H # ZOAD16D) which is designed specifically for use with Zoom effects pedals, including the 3030 and GFX-707. Both power supplies are rated at 9V, 500mA.

Q: 5. will this power the genaray UTP-60B LED lights?

A: Yes, this adapter will power the Genaray Ultra-Thin Bicolor 288 SMD LED On-Camera Light aka UTP-60B.

Q: 6. Are additional pin sizes available if needed?

A: No, Hosa includes six of the most commonly used plug types for small electronics and polarity is switchable. Additional sizes are not available for use with the ACD-477.

Q: 7. I want to use this power adapter in another device that is not from Sabrent as the specs fit the needs. However not sure if the connector tip is the correct one. May I know if the DC connector dimensions are 3.5mm*1.35mm, or is the 2.5mm*0.7mm type?

A: It is the 2.5mm version not 3.5mm.

Q: 8. Is the AC power adapter/charger only 120v 60hz or 120/240 50/60 hz?

A: The AC power supply/charger for the Interfit Badger Beam 60W AC/DC LED Monolight is 100-240V compatible.

Q: 9. Is this the correct power adapter for my Marshall distortion foot pedal?

A: It would be helpful to know which model your Marshall distortion pedal is so we can check the power requirements to confirm whether this adapter is compatible. The Planet Waves adapter is for effects pedals that use a 9V power supply with a 2.1mm negative tip barrel plug and require a maximum of 500mA.

Q: 10. Is this power adapter the correct one for my Marshall distortion foot pedal?

A: What model pedal do you have? This will power a pedal needing 9V DC and less than 500 mA of input power with a negative tip/center positive polarity. This will work with a lot of different pedals, but not all. You'll want to check the specs to be sure. For further assistance please contact us at sales@bhphoto.com or call us at 1-800-606-6969.

There are no reviews for this product.