The 14.8V, 2900mAh, Interfit Li-Ion Battery for Badger Unleashed Flash Head

is the removable, rechargeable power source for the head. The battery will provide 430 full power flashes on a 90-minute charge.

430 Full Power Flashes    Removable, Rechargeable    Charging Time: 90 Minutes    14.8V, 2900mAh

Related Questions and Answers

Q: 1. Can this be used with a Interfit S1N AC/DC HSS TTL Monolight?

A: Being that this monolight uses the same radio trigger system as the S1N, they can be used together.

Q: 2. Are you able to attach an umbrella to the mount?

A: Yes, there is an umbrella mount built into the light stand mount. It can hold either 7mm or 8mm umbrella shafts and holds it in place via a tension rod (no thumb screws).

Q: 3. What kind of case best fits this strobe?

A: The Pelican 1510 https://bhpho.to/2prJ5wF is a good case for holding the light, or a pair of them and a few accessories.

Q: 4. Do I need to purchase the transmitter module (for Canon) separately from this package? -Clarke

A: Transmitters are not included with the kits. It is recommended that you purchase one of these remotes separately to access the full TTL and HSS features. However, the lights can be triggered with 3rd-party transmitters and receivers via the 3.5mm sync port.

Q: 5. Is the wireless receiver compatible with Pocket Wizard Transceivers?

A: Rather than using the Badger Unleashed's built-in proprietary receiver, you'll use a Pocket Wizard as a receiver and plug it into the Badger Unleashed's 3.5mm sync port. To be clear, any wireless transmitter and receiver set (e.g. Vello, Godox, Yongnuo, etc.) with a sync port output could be used in that way, too. The advantage to using Interfit's own remotes is that the Interfit remote will also give you control over the flash intensity from the transmitter. (Of course, you can always push the buttons on the strobe to adjust intensity otherwise.) To locate an Interfit proprietary radio transmitter (which they call a "remote") for this strobe, please click the [ACCESSORIES] button below and then [Radio Triggers & Receivers ]. If one isn't listed for your camera brand (e.g. Fujifilm or Panasonic) then choose the manual remote for all cameras (B&H #INTR1B), which will still allow for control over the flash intensity from the transmitter.

Q: 6. What's the best way to put gels on these heads?

A: The easiest way to put gels on these lights would be to use gaff tape.

Q: 7. What cable would I require to connect this flash to a PC Sync Copal Shutter?

A: You need to get a 3.5mm to standard pc cable - Impact Sync Cord Male Mini (3.5mm) to Male PC (16') BH #IMMMPCM16

Q: 8. Does this light come with a softbox like the Honey Badger?

A: It does not come with a softbox, but you can get one here https://bhpho.to/2NTEfl4.

Q: 9. Does this work with an Olympus OMD em10 ii?

A: You can use the Interfit S1 Manual Remote for all Cameras, B&H # INTR1B to connect the OM-D E-M10 II for manual control only. https://bhpho.to/2EOSYZI

Q: 10. does the battery comes with charger?

A: No, the Interfit Li-Ion Battery for Badger Unleashed Flash Head does not include a battery charger. This would be a replacement spare battery by itself. If you are looking for a battery charger, the Interfit Battery Charger For S1 Monolight, B&H # INBCS1, would be compatible for your usage needs.