Use this set of eight black KillShock Heavy-Duty Shock Modules from Kessler to adjust the tension of the KillShock Isolator System to a heavy-duty level. Each Shock Module consists of three cables that provide a certain level of tension to remove vibration from your rig. The color denotes the level of tension: blue denotes a light level, red denotes medium, and black denotes heavy. The light module is best-suited for DSLR or smaller cine cameras. The heavier and bulkier the rig, the more tension is required.

The KillShock Isolator System utilizes up to eight Shock Modules to remove vibration from any shot, whether on a crane, jib, dolly, or vehicle, and they can be used in any combination of 8, 6, 4, or 3 modules or combined in any configuration of tension levels for balance and fine-tuning.

For KillShock Isolator System    Set of Eight Pre-Loaded Modules    Heavy-Duty Isolation Level    Use with Light- and Medium-Duty Modules

Used with the KillShock Isolator System to remove vibration from moving shots

Heavy-Duty Shock Module consists of three black tension cables

Light-duty modules are best-suited for DSLR or smaller cine cameras, medium- and heavy-duty modules are used with heavier rigs

Configure with 8, 6, 4, or 3 modules and varied module types (light-, medium-, or heavy-duty) to create different levels of shock isolation

Related Questions and Answers

Q: 1. Does this slider works with a manfrotto 501 head?

A: The Kessler Flat Mount Adapter gives you a 3/8 -16 stud on the cart of the CineSlider, so you can mount a flat mount head, like the 501.

Q: 2. what is the load capacity of these wheels as a set?

A: These wheels can handle up to 500 Kg/ 1102 lbs.

Q: 3. What is the maximum weight limit doe this set of wheels?

A: These wheels have a weight capacity of 300 pounds.

Q: 4. Do these come filled or are they empty?

A: The Neewer Heavy-Duty Spring Clamp and Sandbag Kit (Set of 6) bags come empty.

Q: 5. can it also fit the wheels?

A: Yes, this case fits the wheels as well.

Q: 6. How wide will the clamp open to? I need almost 3 1/2 inches to fit.

A: The manufacturer has not published that information.

Q: 7. Is this designed to be used with suction cup on bottom? Can it be used with the suction cup on top and gimbal hanging below?

A: Here is a response directly from Kessler about your inquiry: While it would be possible to rig the KillShock Mini upside down the results are not likely going to be what the customer is expected as the Shock Modules would no longer be compressing and isolating the camera from vibrations as the weight of the camera rig would be pulling the shock modules. If the customer is looking for an underslung type of set-up with a vibration isolator a better solution would be the KillShock (MG1048) and the KillShock Inversion Mounting Kit (MG1068). KillShock (MG1048): https://www.bhphotovideo.com/c/product/1430583-REG/kessler_crane_mg1048_killshock_isolator_system.html KillShock Inversion Mounting Kit (MG1068): https://www.bhphotovideo.com/c/product/1430592-REG/kessler_crane_mg1068_killshock_inversion_mounting_kit.html

Q: 8. Can the O.C. White desk clamp be used with other arms, such as the Auray boom arm?

A: The Heavy Duty Clamp Mount from OC White is compatible with the Auray boom arm and many other arms that feature a 1/2 mounting stud.

Q: 9. How heavy of a camera system will this support. We are looking at the Bosch Mic 7000i camera system. This would be mounted on a truck?

A: There are configurations that allow you to use DSLR's up to RED's and Alexa's with heavy cine lenses. Basically, any camera you could use.

Q: 10. Is there anything similar to this for 1.25" speed rail?

A: The most similar alterative to the Kessler Crane Leg Clamps for Kwik Rail System (Set of 4) for 1.25" speed rail would be the CineMilled 2" Billet Trailer Hitch Adapter for 1.25" Speed Rail Tubing (BH #CICM3100).