Mount a number or accessories onto devices with the Universal Battery Plate from CineMilled. The mount provides 1/4"-20 and 3/8"-16 threaded holes and mounting ears on the sides and bottom of the plate, allowing you to position the mount either vertically or horizontally. With the battery plate's smaller threads, you can screw on CineMilled's optional Gold mount studs or connect to a V-mount to enable you to use batteries as counterweights while powering your camera and accessories. The plate is designed to mount onto the R2 power block, allowing you to use R2 batteries to power your camera or accessories when you are not using a gimbal. The plate includes hardware and a bracket to fit CineMilled's MOVI Pro pan counterweight mount, and it can also mount on the Ronin 2 pan counterweight mount in three different positions.

Another use of the optional Gold mount studs and the R2 power block attached is for R2/Steadicam mode. The best configuration for the R2/Steadicam mode is to move the R2 power block and batteries to the bottom of your Steadicam sled, and the battery plate allows you to securely mount the R2 power block onto your sled. Keeping the weight on the bottom of your sled allows you to properly counterbalance the camera weight up top.

1/4"-20 & 3/8"-16 Mounting Holes    Mounting Ears on the Sides & Bottom    Smaller Threads for Gold Mount & V-Mount    Designed to Mount onto R2 Power Block

Related Questions and Answers

Q: 1. Is there a way to run house power through the module?

A: It will not be possible to run this unit through AC power through a house hold plug. The Tilta Universal Battery Plate will only be able to distribute power from a Gold Mount battery source.

Q: 2. Is there an ON/OFF button to power the whole unit down?

A: There is no power button.

Q: 3. With this power a Sony FX6 at 19.4 volts?

A: Yes, The Tilta Universal Battery Plate (V-Mount) could work if you add this Dtap adapter cable https://bhpho.to/3owgxxA

Q: 4. does this plate work with the came tv stabilizer? https://a href= http://www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html target= _blank www.bhphotovideo.com/c/product/1148838-REG/came_tv_lbv_l4a_lbs1_pro_camera_video_carbon.html/a

A: No, this is made specifically for the Ronin dovetail.

Q: 5. How do I connect a monitor to this plate that requires 12 volt (like the BM video assist?))

A: The Tilta Universal Battery Plate (V-Mount) is not meant for use with a monitor. A plate like the IDX System Technology P-VS2 V-Mount Battery Plate BH #IDPVS2 is recommended.

Q: 6. What power cable does this one use? Or do I have to order that separately? Looking for 4-pin XLR for C300 III

A: You would have to order it separately. You can use a d-tap to 4-pin XLR.

Q: 7. What’s size and dimensions of this plate?

A: According to Tilta the dimensions are 17x12x9 0.52kg.

Q: 8. Compatible cheese plates?

A: A compatible plate for the Wooden Camera Universal Micro Battery Plate (Gold Mount) would be the Wooden Camera Micro Power Accessory Plate, BH #WOP00172.

Q: 9. What type of screws would I need if I wanna attach it to a cheese plate?

A: The plate has 1/4"-20 threaded holes, which are compatible with most cheeseplates when using 1/4"-20 screws.

Q: 10. Would this plate work for fiilex led lights? Specifically the p-360ex?

A: If you purchase the FiilexCoiled D-Tap Cable (1.9'),B&H#FIFLXA011, then yes, the CINEGEARSV-Lock Battery Plate with Universal Clamp for LED Light will work to use V-mount batteries on the Fiilex P360EX light fixture.