The VOX MVX150C1 is a 150W 1x12" amplifier for electric guitarists. In both the preamp and power-amp stages, the MVX150C1 makes use of Nutubes, which condense the basic structure of a vacuum tube down into the size of a chip. This ensures a creamy, tube-like tone, while promoting a ruggedness most tubes cannot deliver by virtue of their construction.

The amplifier offers two channels, but each channel has two different voicings, making the MVX150C1 a versatile unit indeed. Channel one provides clean and crunch modes, while channel two supplies rhythm and lead operations.

Each channel gives you Gain and Volume controls. Both have tonal shaping capabilities: a Tone knob on channel one, and a complete tone stack on channel two. Both channels supply Bright and Fat switches. A Mid-Shift switch on channel two gives you further control over the midrange.

The digital reverb, presence, and resonance controls are shared between both channels. Two master volume knobs are on hand, but these are only selectable via a separately-available footswitch. With the footswitch, you can use the second master knob to push your sound into greater power-amp saturation.

A bevy of features and connections are located on the rear of the amplifier, including an effects loop (switchable between series and parallel operation), an emulated line output (with a sensitivity switch), a power level selector (for reducing your wattage). With a dedicated wet output, you can route effected signal straight to the house, while the dry, unprocessed signal will go to the emulated output. This gives the FOH engineer more options in mixing your sound, as the engineer can put the dry and effected outputs on different channels.

A 1/4" speaker output lets you connect to an extension cabinet, and with the impedance selector, you can choose among 4-, 8-, and 16-Ohm operation. Two footswitch inputs are on hand for external control. A power cable is included.

150W RMS    1x12" Celestion Redback Speaker    Nutube-Powered Preamp & Power-Amp    2-Channel Operation    2 Voicings Per Channel    Built-In Digital Reverb    Switchable FX Loop (Series & Parallel)    Emulated & Wet Only Line Outputs    1/4" Extension Speaker Output    Power Cable Included

• 150W amp featuring a Nutube vacuum tube in both the preamp and power amp sections
• Two-channel design covers a wide range of tones, from pure clean sounds to modern hi-gain
• Each channel provides EQ as well as various modes that provide a wide array of tones
• Each channel's preamp is equipped with a bias adjustment knob
• Built-in digital reverb
• Wet Only output lets you easily set up a wet/dry rig
• Emulated Line Out allows realistic amp sounds for direct-line recording
• Relatively lightweight at 42.8 lb
• UK-made Celestion Redback speaker

Related Questions and Answers

Q: 1. Hi,For the Dedolight DLH4 150 Watt Spotlight with DT24-1 Dimming Power Supply (230V AC),do you sell a dichroic filter and maybe a few other patterns, etc. for it?Thanks,Brian Puchaty

A: For a dichotic filter, please find B&H # DEFDLCDLH4. Any medium size patterns wil work with the DLH4 150. Alternatively, you can also use B&H # DEGK, which is the Dedolight Gobo Kit - Set of 6.

Q: 2. How well would this work for lighting an event? If I had to light a wall 20ft tall from 50ft away would that work? If I was lighting from even farther away would this light work well or should I look for a different light?

A: I use it to light a dance floor 20-30 feet away. It seems to do a great job. I usually have it narrowed to a spot light.

Q: 3. can you also give the sk300?

A: Yes it will work BH #GOMLQS400II

Q: 4. What kind of battery could power this and how long would it last in between recharges?

A: I don't think this light is a good choice for mobile lighting. I would choose the torch L.E.D.

Q: 5. Can I insert the bulb into an SV M-150 Photographic Light? The lamp says the following: Use Esy Lamp 120V, 150W, Max. Smith-Victor Corp., Griffith IN. 46319 USA The lamp I have is very old, but still works with the bulb that is currently in the lamb and looks like the bulb that you are selling.

A: Yes, this lamp would be compatible with the Smith Victor M-150 lamp head.

Q: 6. What is the scrim size for these units?

A: The lights in the Dedolight Master 3-Light Kit can use 3" scrims like these: https://bhpho.to/46kLMAC.

Q: 7. Does this come with a stand and does it get hot at all?

A: no stand, yes it gets hot.

Q: 8. Can this lamp been used for all godox speedlights with 150W modeling lamps?

A: This modeling lamp can be used in any of the Godox monolights that use a 150w modeling lamp.

Q: 9. Is this light considered Flicker Free? I will be using a 300fps capable camera.

A: The Dedolight Universal Tungsten Spotlight without Cable - 100-150 Watts/12-24 Volts is not flicker free. At 300 frames per second your camera will introduce flicker.

Q: 10. Can I use speakers rated for 6 ohms with these speakers with power rms power of 35 watts? I will be using four speakers with two per channel in parallel.

A: You can use speakers rated at 6 ohms, two in parallel on each channel, however the amp will not offer the same specs as they are all referencing a 4 ohm load on each channel.