The Genelec 7382AP is a professional, active subwoofer designed to extend the bass reproduction of active loudspeakers. With flexible calibration and bass-management features, it easily integrates into environments requiring analog or digital interfacing, for sound systems ranging from simple stereo to 40+ channels of immersive audio in large recording studios, film mixing facilities, mastering suites, post-production houses, clubs, or high-end home theaters.

The 7382AP's rugged, wood-fiberboard enclosure houses three, custom-designed 15" long-throw woofers, which deliver high SPL up to 130 dB, with low distortion and minimal power compression. Combined with a laminar-flow, bass-reflex port, the subwoofer provides precise bass articulation at frequencies down to 15 Hz.

Electronics are integrated in the RAM-SW remote amplifier module, individually calibrated to match the supplied subwoofer. The module contains active crossover filters, digital signal processing algorithms, overload protection, and a 2500W, Class-D amplifier. Analog and AES/EBU digital I/O, as well as a separate LFE (Low Frequency Effect) analog input offer a set of flexible connectivity options, which support distributed bass-management technology.

As part of the SAM Series of subwoofers, the 7382AP integrates with the Genelec Loudspeaker Manager (GLM) software (free download available separately), via which it can be calibrated, configured, and controlled to compensate for detrimental room/acoustic anomalies, solve issues of subwoofer placement, and obtain a flat frequency response.

Built to withstand the rigors of professional use, the 7382AP's electronics, drivers, and enclosure were designed, assembled, tested, and individually calibrated in the Genelec factory in Iisalmi, Finland.

For Film, Post, and Music Production    Rugged Wood Fiberboard Enclosure    3 x Custom-Designed 15" Woofers    2500W Class-D Remote Amplifier Module    Integrates with GLM Calibration Software    Frequency Response Down to 15 Hz    Maximum SPL of 130 dB    Laminar-Flow Bass-Reflex Port Design    XLR Analog and AES/EBU I/O    Dedicated LFE Input

• Subwoofer with flexible calibration and bass-management features
• For systems ranging from simple stereo to 40+ channels of immersive audio
• Easily integrates in environments requiring analog or digital interfacing
• Use in large recording studios, film-mixing facilities, mastering suites, post-production houses, and more
• Three custom-designed 15" woofers 
• 2500W Class-D RAM-SW amplifier module
• Laminar-flow bass-reflex port design provides extended low-frequency performance
• Extended low-frequency response down to 15 Hz
• Active crossover
• Maximum SPL in excess of 130 dB
• Frequency response down to 15 Hz
• Smart Active Monitoring (SAM) technology integrates with Genelec Loudspeaker Manager (GLM) software (free download available separately) 
• Energy-saving Intelligent Signal Sensing (ISS) automatically puts the subwoofer into power-save mode when audio has been absent for a selected time
• Producer Black finish
• Designed, hand-assembled, and individually tested at Genelec's factory in Iisalmi, Finland

• High-quality wood fiberboard enclosure
• Heavily braced to eliminate structural resonances and vibration
• Four integrated handles for easy maneuverability and installation

• Three, 15" long-throw, magnetically shielded woofers
• Woofers deliver high SPL with low distortion and minimal power compression

• Remote design allows for flexible installation
• Individually calibrated to match supplied subwoofer speaker
• NL4 speakON input connector
• Temperature-controlled forced-air cooling provides low-noise operation and excellent reliability
• Module can be quietly installed in the listening space
• Height: 3 RU

• Produces high output and features universal mains input voltage for convenient worldwide operation

• Precision DSP algorithms ensure high dynamic range and low self-generated noise

• For total system control and automated room-calibration features
• Integrates with GLM software (free download available separately)
• Use GLM software to configure, calibrate, and control subwoofer 

• Bass management divides the input audio signal into low-frequency and high-frequency content at the subwoofer crossover frequency
• Monitors and subwoofer receive full bandwidth audio signal and filtering is done separately inside each monitor and subwoofer
• Signal content below the crossover frequency is reproduced by the subwoofer
• The crossover frequency can be adjusted from 50 Hz to 100 Hz in 5 Hz increments
• Crossover is set via the GLM software

• For adjustable bass management and optimized low-frequency system performance
• 2 x XLR balanced analog audio inputs to connect a console or a monitor controller to the subwoofer
• 1 x XLR balanced analog LFE (Low Frequency Effect) input for dedicated analog LFE signal
• 2 x XLR balanced analog audio outputs to connect the subwoofer to the monitors
• 1 x XLR AES/EBU digital audio input (accepts stereo signal)
• 1 x XLR AES/EBU digital audio out/thru for bit-to-bit copy of digital signal at AES/EBU input
• 2 x RJ45 GLM control network connectors
• SpeakON connector to connect amplifier module to subwoofer cabinet

• Efficient use of materials
• Low-energy consumption
• Extended lifetime by design

Related Questions and Answers

Q: 1. Do I get a pair if i make this purchase?

A: You have to order 2 to get a pair.

Q: 2. What's the height of this product? How much does it raise the speakers?

A: Total height of the table stand is not offered unfortunately, however when mounted to a 6010 or 8010 speaker will raise the speaker 96mm (3.75 ) from the surface.

Q: 3. The price is for two monitors?

A: Genelecs are always priced singly; multiply the price by two if you want a pair. If you've never heard Genelec monitors, then you probably will think they're overpriced. But if you have discerning ears, and you do an A-B comparison between any Genelec and any other monitor of equivalent size, you will immediately hear the difference...and it's not subtle; it's not merely obvious, it's startling. Put another way, if you CAN'T hear the difference, you don't need to be spending money on Genelecs. Buy something cheaper. But if you want the best audio monitors in the world, nothing else even comes close.

Q: 4. Will this stand work with a Genelec G One Bookshelf Speaker (G1BM)?

A: Yes, the Genelec L-Shape Table Stand for 8010 Studio Monitor is also compatible for use with the Genelec G One 2-Way Powered Bookshelf Speaker.

Q: 5. Is this a good monitor for everyday use on a computer with built-in sound card and 1/8" to dual XLR splitter cable?

A: The Genelec 8020D Studio Monitor (Producer Finish) is an excellent choice for everyday monitoring, and it can be used with your computer's built-in sound card if an audio interface or monitor controller is not an option.

Q: 6. does it come with the white version?

A: unfortunately, Genelec F One 6.5" 40W Active Subwoofer (White) is no longer available.

Q: 7. Can the ISS be disabled? I see that there's a DIP switch for "ISS" on the back, so I assume that's for enabling/disabling ISS, but I'd like confirmation. ISS is not a feature I need or want. Thanks!

A: An ‘ISS Disable’ switch is located on each product’s back plate next to the other room response controls. First, when the mains power switch of the loudspeaker is set to “ON”, the ISS™ auto-start function (low-power sleep state on/off) of the loudspeaker is active. If this function is not desired, the ISS™ function can be disabled by setting the “ISS Disable” switch on the back panel to “ON” position. In this mode, the monitor is only powered on and off using the mains power switch. I hope this answers your question. Thanks.

Q: 8. How many watts.

A: 2,500 W Peak / 1,250 W RMS

Q: 9. How much heat does the amplifier generate? I'm asking so we can properly spec our aircon system

A: The manufacturer has not provided a specification for the amount of heat that the Genelec 7382AP SAM Series 3 x 15" 2500W Studio Subwoofer generates. Genelec does note that this subwoofer is designed for indoor use only and provides specifications for the environment that it can be used in. The permissible ambient temperature is 50 to 95°F and relative humidity 20 to 80% (noncondensing). The amplifier should never be covered or placed it in a closed cabinet. The space must be ventilated or sufficiently large enough to dissipate heat so that the ambient temperature around the 7382AP does not rise above 95°F. The reflex port opening on the enclosure should have a minimum clearance of at least 8 inches to ensure functioning of the reflex port. If the subwoofer is going to be flush mounted in a wall, you must allow for unrestricted airflow in the reflex port and amplifier cooling.

Q: 10. Between this 8010 and 8010A white version bh have. what is Difference ? Just color? Or ia there any difference more than that?

A: Both monitors are the same model. The only difference between the two is the color. B&H #GE8010AP is the producer finish and B&H # GE8010AW is the same monitor in white finish.