Incorporating CoreSWX's VoltBridge technology for wireless managing of your fleet of batteries, the CoreSWX VoltBridge Enabled Fleet Micro 3A Digital Quad Charger for V-Mount Batteries is capable of simultaneously charging four batteries at 3A each. This means that four 98Wh batteries can be charged in under 2.5 hours. The onboard LCD display screen allows you to easily monitor your battery's smart data without needing to connect to a computer. The micro-USB connector allows for firmware updates and for connection to a PC.

The built-in Battery Management Test mode allows the charger to determine battery health and recharge performance. Activating the SafeFly mode forces the charger to discharge or charge connected batteries to a 30% charge level to meet air travel and shipping requirements. While plugged into an AC power source, the charger can either charge batteries or be used as a camera power supply via the built-in 4-pin XLR. In the absence of AC power, you can use the charger to feed the 4-pin XLR from connected batteries providing unregulated power. The housing is made of aluminum, providing a robust build.

VoltBridge Wireless Battery Management    Four-Position V-Mount Charger    Charge Current: 3A    Simultaneously Charge Four Batteries    4 x 98Wh Packs Charge in Under 2.5 Hours    Onboard LCD Display Screen    Battery Management Test Mode    SafeFly Charge/Discharge Mode    Worldwide Compatible 90-240 VAC Input    4-Pin XLR Powered DC Output

• The charger incorporates VoltBridge technology which enables you to remotely view your attached batteries status via a mobile device app; the app also allows you to have the charger put your attached batteries into SafeFly mode
• Accessing the chargers control panel provides the same management capabilities as the VoltBridge app, without the same convenience
• Four independent V-mount charge bays
• Simultaneous charging
• Approximately 2.5-hour charge time for four 98Wh batteries
• When SafeFly mode is activated, the charger will either discharge your battery down to 30% of capacity or charge it up to 30%, depending on the charge state of the battery
• 90 to 240 VAC worldwide compatible input voltage
• Compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX
• The four-line LCD display screen enables monitoring battery information from the charger
• Hypercine mode allows you to mount up to four batteries to provide unregulated 12 to 16.8 VDC from the charger's 4-pin XLR, without connecting to an AC power supply
• In Hypercine mode, the charger's LCD reports back available capacity as well as remaining runtime
• Aluminum build
• Weighs 5 pounds
• An optional "Hypercine Module" (not included) enables the charger to provide both unregulated 12 to 16.8 VDC and regulated 28 VDC via a 3-pin XLR output

Related Questions and Answers

Q: 1. Will this work with the Endura cue V-mount d-150? 146Wh

A: no this will not charge IDX batteries

Q: 2. Will this fleet charger charge the XP-L90A battery model?

A: Yes this charger should work well with any Gold Mount Core SWX Battery.

Q: 3. Can this charger be used on Anton Bauer Dionic series gold mount batteries?

A: Not that we are aware of. Anton Bauer Dionic batteries will require Anton Bauer chargers.

Q: 4. What does Volt Bridge Enabled do if one was to choose this option?

A: The VoltBridge version of the Core SWX Fleet Micro 3A Digital Quad Charger for Gold Mount Batteries allows for wireless battery management through a mobile device app, providing remote battery status as well as the ability to put mounted batteries into SafeFly mode.

Q: 5. Will this fit the Hypercore Neo 9 Mini's?

A: Yes, The Core SWX Compact Quad Micro Battery Fast Charger (V-Mount) would also support and charge SWX Hypercore Neo 9 Mini batteries.

Q: 6. will this charge the NEO 150 Mini Series - V-MT?

A: Yes, the Core SWX Fleet Q V-Mount Four-Position Charger will charge Core SWX HyperCore NEO 150 V-Mount batteries.

Q: 7. Can the charger provide XLR power while charging from AC?

A: While drawing AC power, the Core SWX Fleet Micro 3A Digital Quad Charger for V-Mount Batteries (B&H# COFLEETQM4S) can either charge the batteries or provide power through the 4-pin XLR output. You can select your preferred option of those two using the selector switch on the back of the unit. Those two alternatives cannot both be used at the same time.

Q: 8. Does this model (BH #COFLEETQ4S MFR #FLEET-Q4S) have the ability to discharge for air travel?

A: No, The SWX FLEET-Q4S will not be able to discharge batteries. The best choice with discharging support using the VoltBridge app ( Apple or Android) would be the Core SWX Fleet Q4Si https://bhpho.to/3LMVU9v

Q: 9. 2 questions: 1) is the 3A charge current for each channel? 2) does this prioritize charge or 3A per channel constant?

A: The Core SWX Fleet D Gold Mount 2-Bay Charger (B&H# COFLEETD2A) supplies each battery a regulated 3A of charge current regardless of the number of batteries present. If two 98Wh batteries are installed, for example, then you can therefore expect a charge time of approximately 2.5 hours, although that does vary according to temperature and variances in battery chemistry.

Q: 10. Is this charger compatible with IDX Endura Duo DC14.4V lithium Ion V-mount batteries??

A: Yes, the Core SWX Fleet Micro 3A Digital Quad Charger compatible with batteries from RED, Anton Bauer, and others in addition to CoreSWX.