Camvate 1/4"-20 (f) To 3/8"-16 (m) And 3/8"-16 (f) To 1/4"-20 (m) Screw Adapter Set
- Product Code: ga63038
-
Use this stainless-steel 1/4"-20 (F) to 3/8"-16 (M) and 3/8"-16 (F) to 1/4"-20 (M) Screw Adapter Set from CAMVATE to connect cameras and tripod plates. This set comes with one 1/4"-20 female to 3/8"-16 male screw adapter, and one 1/4"-20 male to 3/8"-16 female adapter to help connect a variety of gear with 1/4"-20 and 3/8"-16 screws and threads. The edges are knurled for a better grip when tightening.
Two Screw Adapters Included Use with Camera or Tripod Plates 3/8"-16 Male to 1/4"-20 Female Adapter 1/4"-20 Male to 3/8"-16 Female Adapter Stainless-Steel Construction Edge Knurling for Better Grip
Parameters | |
---|---|
Material of Construction | Stainless steel |
Screw Thread | 1/4"-20 female, 3/8"-16 male 1/4"-20 male, 3/8"-16 female |
Dimensions (H x Diam.) | 0.6 x 1" / 16.5 x 25 mm |
Weight | 1/4"-20 (F) to 3/8"-16 (M): 1.3 oz / 36.8 g 1/4"-20 (M) to 3/8"-16 (F): 1.2 oz / 33.5 g |
Packaging Info | |
Package Weight | 0.2 lb |
Box Dimensions (LxWxH) | 5 x 3 x 1" |
Related Questions and Answers
Q: 1. Can this be attached to a 75mmx75mm VESA mount?
A: No, it appears that the maximum spacing for the 1/4"-20 screw threads is 72mm.
Q: 2. Does this include 1/4-20" screws to attach to a tripod foot, or are additional screws needed to attach the cheeseplate?
A: It does not include 1/4"-20 screws. The plate includes four M4 screws. Your tripod foot should have a 1/4"-20 or 3/8"-16 screw or thread to attach to the CAMVATE Multifunction Cheese Plate.
Q: 3. Will this clamp unscrew far enough to fit the main pole diameter of a universal C stand?
A: This clamp has a range between 0.12 to 1.65 inches. The C-Stand will need to have a diameter between those numbers for it to clamp on to it.
Q: 4. I have a Rokunar SP Studio System. One of the light stands top has a screw for adding a lamp, the threaded screw broke. I tried to take it off the pole but it does not come off. I did take the screw off that holds it to the pole. It seems to be glued in. Used two pipe wrenches, but it busted. So now I will drill it out or cut below it and lose about 2 inches. So what is the replacement I need?
A: Just get a new one its worth the headache
Q: 5. Does the d-ring stay put once you move it down to the side, or is it loose where it flops around?
A: Yes it will stay put. It does not flop around.
Q: 6. I'm considering using this to attach an Arca Swiss plate to my camera. What is the diameter of the split ring? Regards, David.
A: The split ring on the CAMVATE Split Ring with 1/4"-20 Screw for Tripod/Camera Attachment has an external diameter of 29mm, while the internal diameter is 27mm.
Q: 7. Can I use this as a VESA for a laptop mount tray, and connect the VESA to a 1/4 boom arm? In Little words, can I use this as a adaptor for a laptop mount tray connected to a boom arm?
A: The VESA Compatibility on this CAMVATE Multifunction Cheese Plate with 1/4"-20 and 3/8"-16 Threads would be 75 mm.
Q: 8. Does the screw allow you to adjust the tension of the tilt mount so that you can adjust the angle on the fly and have it stay put, or do you have to use the screwdriver to loosen and tighten the screw to lock it down every time you want to adjust it?
A: With the CAMVATE Tilting Shoe Adapter Support with 1/4"-20 Screw for Monitor/Light, you need to use the included screwdriver to loosen and tighten the tilt.
Q: 9. Is the t-shaped handle available as a spare part ??
A: We do not have just the T-Handle as a separate part on our website.
Q: 10. Does B&H also sell anti-rotation pins for this cold shoe adapter?
A: No specific anti-rotation pins were located for this adapter.
Top Bestselling Products
Ulanzi Gopro To O-lock Adapter
$59.85 $92.77
Tilta Lightweight Filter Clamp-on Adapter
$87.00 $125.28
Arri Lmb 6x6 Clamp Adapter 143mm
$750.00 $1,042.50
Arri Lmb 6x6 Clamp Adapter 165mm
$750.00 $1,155.00
Fotodiox 72mm Ninja Filter Adapter Kit
$47.85 $76.08
Fotodiox 58mm Ninja Filter Adapter Kit
$35.85 $57.36
Fotodiox 52mm Ninja Filter Adapter Kit
$35.85 $43.02
Cokin Z-pro Series Filter Holder Adapter Ring (58mm)
$89.97 $138.55
Kase Wolverine Magnetic Filter Adapter Ring (67mm)
$68.85 $106.03
Datavideo Digital Intercom Belt Pack
$837.00 $1,029.51
Products You May Like
Fsr Ips-c910s-wht Ips Control Insert (white)
$260.85 $393.88
Auralex Propad Xl Studio Monitor Isolator
$599.97 $731.96
Haida Nanopro Mc Nd Filter (82mm, 12-stop)
$273.00 $382.20
Dell Optiplex Small Form Factor Plus 7020 Desktop Computer
$3,147.00 $3,996.69
Trp Worldwide Solid Duvetyne Commando Cloth (12 X 20')
$1,254.00 $1,805.76
Proaim Curve-120 Curved Circular Camera Slider (33.2")
$627.00 $890.34
Ona Prince Street Camera Messenger Bag (olive)
$1,047.00 $1,350.63
Kramer Usb-c 3.2 Gen 2 Cable (66', Black)
$1,296.00 $1,969.92
Bluestar Oval Small Viewfinder Eyecushion (fleece, Camo)
$21.00 $32.76
Smartsystem Matrix 4-pin To 2-pin Dc Power Cable (20")
$329.85 $435.40
Bright Tangerine 4d Speed Crank With Zero Backlash Coupling
$585.09 $754.77
Wine Country Camera 100mm Filter Holder Kit With 62mm Adapter Ring
$897.00 $1,255.80
Angenieux Range Extender For Optimo Zoom Lenses (2x)
$17,697.00 $24,067.92
Blustream 7-input/2-output Multi-format Presentation Switcher
$1,812.00 $2,301.24
Wooden Camera Unified Accessory Kit For Panasonic Gh6 (base)
$2,217.60 $3,104.64
Godox Ml100bi Bi-color Portable Led Light
$597.00 $788.04