Add extra support to a monitor or camera with this aluminum Cheese Handgrip with 3/8"-16 Mounting Screw from CAMVATE. The black handle features a removable silver 3/8"-16 top mounting screw and multiple 1/4"-20 and 3/8"-16 threads for mounting various accessories. The bottom cap features a 1/4"-20 threaded mounting hole and screws off to reveal a larger M20/20mm thread for additional extensions.

Solid Aluminum Construction    Cheese Handgrip Design    1/4"-20 and 3/8"-16 Threaded Holes    Black Handgrip with Silver 3/8"-16 Screw    Removable Cap Allows for 20mm Extensions

Related Questions and Answers

Q: 1. Does this include 1/4-20" screws to attach to a tripod foot, or are additional screws needed to attach the cheeseplate?

A: It does not include 1/4"-20 screws. The plate includes four M4 screws. Your tripod foot should have a 1/4"-20 or 3/8"-16 screw or thread to attach to the CAMVATE Multifunction Cheese Plate.

Q: 2. What are the measurements of the actual plate? Only package size is listed...

A: The measurements of the CAMVATE Multipurpose Mounting Cheese Plate for BMD URSA Mini are 50 x 132 x 10mm or 1.97 x 5.2 x 0.39 inches.

Q: 3. would this accomodate the black magic handle viewfinder piece?

A: It will not. You will not be able to put the top handle that comes with the Ursa Mini Shoulder kit which then allows out to put the Ursa Viewfinder on the camera.

Q: 4. What's the max carrying weight for this item? i.e. What's the heaviest payload that has been tested on this item?

A: The CAMVATE L-Shaped Cheese Plate Extension Mounting Platform will be able to support up to 22lbs of payload weight.

Q: 5. Can the owner replace the ⅜ - 16 with a ¼ - 20 adapter?

A: Yes, you can replace the ⅜"-16 with a ¼"-20 adapter.

Q: 6. How long is this camera screw in inches from the base to the end (not including the head)?

A: It is probably not long enough. I can't remember exactly how long, but I purchased this screw to use with a small teleprompter. It needed to go through the tripod camera plate then through the teleprompter plate into a small threaded universal mounting plate. It only went flush with the teleprompter plate; not enough threads to securely attach the teleprompter. It would be helpful if the description or specs gave the length so that we could make a more informed decision.

Q: 7. What is the diameter of the circle?

A: The RigWheels RigMount 100 High-Power Magnetic Mount with 3/8"-16 Mounting Screw have a 4" diameter.

Q: 8. How long/wide is this?

A: The rail is 4.1 inches long (or 105mm). Width is not defined by the manufacturer and we have no way to physically verify this information as this is a special order item, which ships directly from the manufacturer.

Q: 9. Will this screw fit the sliding plate for a Libec H70 head? I need to attach a Panasonic P2 HD AG-HPX170P to it. The Panasonic manual says the P2 requires a 1/4-20 UNC screw. The mounting hole is 5.5 mm deep.

A: For the Libec H70 Fluid Head we recommend the Miller 1/4"-20 Screw for Miller Quick Release Plates BH #MI036 • MFR #036.

Q: 10. Does the d-ring stay put once you move it down to the side, or is it loose where it flops around?

A: Yes it will stay put. It does not flop around.