Give your camera solid feet to stand on with the 100AL2 100mm Aluminum Tripod from OZEN. Designed for use with a separately available 100mm fluid head, this lightweight two-stage tripod supports a payload of 55 pounds and offers working heights ranging from 25.6 to 62.5" using the included, removable mid-level spreader. If you need to go even further up or down, you can replace the included spreader with the separately available Contender heavy-duty mid-level spreader, which gives you a range of 23.6 to 65".

For greater rigidity, the 100AL2's aluminum leg tubes are pin-secured to their anchors—no glued joints. Highly visible flip-lock brakes are used to secure the legs into place. Moreover, the 100AL2 comes equipped with deep-tread rubber feet for better traction on smooth surfaces.

2-Stage Aluminum Tripod    For Fluid Head with 100mm Ball    Agile 15 Fluid Head    Counterbalanced Payload: 8.8 to 35.2 lb    10-Step Counterbalance    7/7 + 0 Pan/Tilt Fluid Drag    Removable MLS100 Mid-Level Spreader    Height Range with MLS100: 31.9 to 68.8"    Deep-Tread Rubber Feet    SoftCase 100 with Strap & Internal Pouch

Payload capacity of 55 lb

Removable MLS100 mid-level spreader and deep-tread rubber feet

Anodized aluminum tubes are pinned to their joints, not glued

Flip-lock brakes are operator adjustable

Compatible with Agile 10, 12, and 15 fluid heads (available separately)

Related Questions and Answers

Q: 1. Can you remove the fluid head?

A: Yes you can. Just unscrew the knob underneath the tripod head when you want to remove it from the tripod.

Q: 2. What size is the thread on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 3. I need to buy arm or handle for this tripod, but i not seeing that accessory for buy!

A: Unfortunately, GVM does not offer second handle parts for this tripod model.

Q: 4. What size are the threads on this pan bar?

A: That's not specified by the manufacturer at the moment.

Q: 5. Is the S-Loc plate system compatible with Manfrotto-style plates?

A: Yes, the S-Loc quick release plate system is compatible with Manfrotto style quick release plates such as the 501PL.

Q: 6. Does the fluid head included with this tripod have separate pan & tilt tension adjustments, or only locks?The fluid head in these images appears to be the Magnus VPH-20, which has separate pan & tilt tension knobs. However, I don't see that feature listed in the specifications for the fluid head included with this tripod.

A: There is some degree of tension adjustment, but it's really had to adjust in that respect. In practice, the controls act more like locks. The tilt action does have a separate knob to adjust tension, but it's really hard to turn that knob, so it's not something you'll want to change a lot. You can set the tension for the camera you'll use, then pretty much want to leave it alone. That is for the tilt, there is no separate tension adjustment for the pan, just the one knob that may allow you to add some tension, but it's not very precise in that respect, mainly just good to lock the pan movement. This tripod is functional for the price, but as with anything you'll get what you pay for. For the price, this is a good tripod, it will do the job and holds up pretty well with use. But don't expect it to function as well as tripods that cost 3-4x as much, that just isn't realistic.

Q: 7. How low and how high can the camera go on this tripod?

A: Height Range on this tripod is: 35" to 73.2"

Q: 8. Can you mount other heads on this tripod? Like a 3 way head to do portraits vertical and horizontal?

A: Sorry, no this head is not removable.

Q: 9. Can this bar be used on the Ozen Agile 15?

A: Yes the OZEN Extending Pan Bar PB-2 works with all Ozen Agile head models including the 15.

Q: 10. What are the dimensions of the pan bar (length and diameter) when full collapsed?

A: The pan bar itself (not the thicker section near the clamp and not the grip handle) of the OZEN Agile 5S S-Loc 75mm Fluid Head (B&H# OZAG5S) is approximately 3/4" (19mm) in diameter. The length of the pan bar including both the thicker section (where it starts) until the bottom end of the grip handle is approximately 15" (38cm) in length when measured from the start, to the elbow bend, and then from there to the opposite end of the pan angled bar.