The coiled 19.6 to 27.5" 8-Pin LEMO to 4-Pin LEMO Cable is designed to connect the CineMonitorHD video monitor and the RED One camera. It features an 8-pin LEMO connector on one end, and a 4-pin LEMO connector on the other.

CineMonitor HD to RED One Camera    8-Pin LEMO to 4-Pin LEMO

Related Questions and Answers

Q: 1. Can this power a Small HD 503 monitor?

A: The SmallHD 503 does have a 2 Pin Lemo connection for power. However you may want to stick with their official power cable which is BH #SMPWRDTAPL36. https://bhpho.to/3l6TPYR

Q: 2. Can this cable be used to power a Teradek Bolt 500 XT?

A: Yes it can.

Q: 3. Whats the voltage rating for this cable?

A: Manufacturer does not explicitly define voltage rating on this cable, but they do state compatibility with the following: Teradek Bond ARRI RED Paralinx Preston Transvideo Offhollywood Switronix Panasonic, which would suggest the cable is adequate for most v-mount and/or gold mount applications.

Q: 4. Can I use this cable to jam my Denecke SB-3 with my Sound Devices 788T?

A: No this is for iOS devices. You need the single ring 1/8 connector. You need to cables to do it. This one a href= http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps target= _blank http://www.bhphotovideo.com/c/search?Ntt=laird+digital+cinema+sd-tcd2-01&N=0&InitialSearch=yes&sts=ps/a and this one. a href= http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html target= _blank http://www.bhphotovideo.com/c/product/889382-REG/psc_fpsc1082_1_bnc_1_8_mini.html/aThats how we did it.

Q: 5. Will this cable work to jam to a Deity TC-1 box? Same thing, just the Deity?

A: Yes but it is recommended that you use the Deity Microphones C14 instead because of the threaded locking connector.

Q: 6. Is the 2 pin part of this cable male or female?

A: Both ends of the Camvate D-Tap to Right Angle 2-Pin LEMO Cable (Coiled) are male.

Q: 7. Can you directly power the Z Cam E2 S6 using this cable from the DC 12v input into a vmount battery?

A: Yes, you will be able to use the CAMVATE D-Tap To 2 Pin Right Angle Coiled Power Cable to power your Z Cam E2 S6 since this camera has a 2-Pin LEMO (12 VDC) Input.

Q: 8. Would this cable power a non-Teradek brand, 2-pin lemo device? Specifically, a different brand video transmitter.

A: There should be no issue at all. However, prudence dictates that you should check the polarity of the connections before hooking it up.

Q: 9. Can I use this cable to feed time code from a Sound Devices 633 or 702T into the mic in on my Canon 5D mkii?

A: The cable will give you TC out of the SD machines, but I do not believe that the 5D can jam sync internal TC in the camera through a mic input with an AGC. Use a TC slate (Movieslate on an iPad?) which you can jam to the SD machines using this cable, show the camera the slate when you roll, and this will get you close enough to sync double system .wav files in post.

Q: 10. Will this work with the new Z CAM 2.89" EVF101 Electronic Viewfinder?

A: Yes, the Z Cam EVF101 takes a 2 Pin Lemo 0B, such as that on this Camvate D-Tap to Right Angle 2-Pin LEMO Cable.