Lightning Cable Has Black Pin

Transvideo Mini 2-pin Lemo To 3-pin Lemo Male Coiled Cable For Starlitehd On Mk-v

Product Code: ga63565
Availability: In Stock

$462.00 $614.46

Qty

2 reviews Write a review

Description
Reviews (2)

The Mini 2-Pin LEMO to 3-Pin Lemo Male Coiled Cable for StarliteHD on MK-V from Transvideo features a mini 2-pin LEMO connector on one end, and a 3-pin Lemo connector on the other.

Powers StarliteHD on MK-V Minimum Length: 1.6' Maximum Length: 2.3'

Parameters
Compatibility	StarliteHD on MK-V
Connector 1	Mini 2-Pin LEMO
Connector 2	3-Pin Lemo
Length	Minimum: 1.6' / 50 cm Maximum: 2.3' / 70 cm

Related Questions and Answers

Q: 1. Can this cable work with the teradek Cube 655?

A: Yes, this cable will work with the Teradek Cube 655.

Q: 2. Does this connect to the Atomos Shinobi 7” ?

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") would work as a power cable for the Atomos Shinobi 7" 4K HDMI/SDI Monitor.

Q: 3. Will this work with the SmallHD Cine 5?

A: Yes, the Kondor Blue Coiled D-Tap to LEMO-Type 2-Pin 0B Male Power Cable for Z CAM, SmallHD & Teradek (Black) can be used with the SmallHD CINE 5 Touchscreen On-Camera Monitor.

Q: 4. Would this cable work to send timecode out of the Sound Devices MixPre 3 to an Alexa Mini for Jam sync of timecode?

A: The Sound Devices 5-Pin LEMO to USB-C Timecode Cable for A20-Mini is not compatible with the MixPre-3, because the MixPre-3 has neither a 5-pin LEMO connector nor USB-C timecode capability.

Q: 5. Would this work connecting a Zephyr Steadicam to power a Sony FX9?

A: The Transvideo 3-Pin LEMO to Pag Jack 12V Power Cable for Steadicam Clipper II would not work as a means to power the Sony FX9 from the Zephyr Steadicam, as the voltage is too low and the connector is not the correct type.

Q: 6. Is the 2 pin part of this cable male or female?

A: Both ends of the Camvate D-Tap to Right Angle 2-Pin LEMO Cable (Coiled) are male.

Q: 7. Can this power the came tv astral follow focus motor wich has 6pin lemo input?

A: No, this will not work on a 6-pin LEMO input since this cable is a 2-pin LEMO.

Q: 8. Will this work with the new Z CAM 2.89" EVF101 Electronic Viewfinder?

A: Yes, the Z Cam EVF101 takes a 2 Pin Lemo 0B, such as that on this Camvate D-Tap to Right Angle 2-Pin LEMO Cable.

Q: 9. Would this work with the BMPCC 6K Pro? Thanks

A: No this will not work. There are D-Tap Cables designed specifically for the Pocket Cinema Cameras (4K/6K/6K Pro) Here are a few considerations Blackmagic Design Pocket Cinema Camera 4K DC Cable Pack B&H # BLCCPOC4KDC MFR # CABLE-CCPOC4K/DC Kondor Blue Coiled D-Tap to 2-Pin Power Cable for BMPCC 6K/4K (Blue) B&H # KOIPUBM4KCBL MFR # WEIPUBM4KCOIL_FBM IndiPRO Tools Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K & 6K (18-40") B&H # INCDTB4K MFR # CDTB4K CAMVATE D-Tap Male to 2-Pin Female Extension Power Cable for BMPCC 4K/6K Camera B&H # CAC2398 MFR # C2398

Q: 10. Will this work with a Z Cam E2 S6?

A: Yes, the Z-Cam E2 S6 has a DC 12V input that uses a 2-pin LEMO.