The Transvideo StarliteRF-a Ultra Kit includes a StarliteRF-a wireless monitor with built-in receiver, two Titan-HD2 transmitters, and two Titan HD-2 receivers.
The StarliteR-Fa monitor/receiver features a 5" Amoled touchscreen and can be paired with the two Titan-HD2 transmitters, allowing you to control your ARRI Alexa-Mini and AMIRA cameras. Pair the transmitters with the additional two Titan-HD2 receivers to accommodate more input signals. Other monitor features include a built-in .H264 recorder, 1280 x 720 resolution, 3G-SDI/HD-SDI/SD-SDI video input and output and a contrast ratio of 3400:1.
The StarliteRF-a system has a wireless transmission range of up to 600' and a frequency range of 5.8 GHz. Three mini-swing arms and all the necessary cables and power supplies are included in the kit.

StarliteRF-a Wireless Monitor/Receiver    5" Amoled Touchscreen with Recorder    3G-SDI/HD-SDI/SD-SDI Input & Output    Two Titan-HD2 Transmitters    Two Titan-HD2 Receivers    Up to 600' Range    5.8 Ghz ISM Band    720p/1080p /1080i /1080psf Support    Three Mini-Swing Arms Included    Cables and Power Supplies Included

• 5" AMOLED 3G-SDI/HD-SDI/SD-SDI monitor
• 1280 x 720 resolution
• Built-in wireless receiver
• Touchscreen
• Can directly control an ARRI-Mini camera interface
• Compatible with cameras with standard functionalities
• Smart corners for user assigned tools
• Zoom zone
• Rec zone
• H and V flip
• VirtualHorizon and PDF reports
• Configuration app and file
• Waveform, Histogram, and Vectorscope measurements
• Peaking focus
• 1:1 zoom (pixel to pixel), slide in zoom, and centered zoom
• REC on SDI, auto REC, snapshot, playback, and output converter record and play features
• 3400:1 contrast ratio
• 80° horizontal and vertical viewing angles
• 380 cd/m² brightness
• D56 color temperature
• External SD card

Related Questions and Answers

Q: 1. Does this allow you to rack mount the Sennheiser XSW 1 DUAL (SEEMXSW1DUHL )?

A: No, there is not a rackmount kit for the XSW-1. You would want to use a rack shelf: https://www.bhphotovideo.com/c/product/1261093-REG/auray_rs_v_1u_one_space_vented_rack.html

Q: 2. Will this work with a Nikon D800 and Alien Bee 400?

A: Yes, this trigger system https://bhpho.to/3yUu84o would work with the Nikon D800 and Alien Bee lights. You can use the 2.5 mm to 3.5 mm sync cord to connect the receiver to one of the lights.

Q: 3. Is this mono or stereo?

A: The input is a mono XLR connection. The output would be dual mono from the stereo output jack.

Q: 4. Will it work with Nikon D3400?

A: Yes. The following system will allow an end-user to have manual control of there strobe units. Be mindful there will be no TTL available.

Q: 5. can this be expanded to have more receivers later?

A: Yes, you can add more U4R receivers to expand the monitoring system.

Q: 6. Will the shutter release work in bulb mode? Can you press the button to open the shutter, then push the button again to close the shutter or do you have to hold the button on the remote down during the whole shutter opening?

A: per documentation that came with the product:Half-press the trigger button on the Transmitter to focus the lens on the camera.Full-press the trigger button to open the shutter. Releasing the trigger button within 3 seconds, will close the shutter. If you hold the button down for more than 3 seconds, the shutter will remain open when you remove your finger from the button, and it will close only when you press the trigger again.

Q: 7. What kind of receiver would I need to receive the signal transmitted by this unit? Does it use standard frequencies?

A: The Transvideo 95TITANTX Titan Wireless Video Transmitter works with the compatible Transvideo receiver. A kit is listed below. Transvideo 95TITANSET Titan Wireless Transmitter Set BH #TRTTS

Q: 8. Does it work with Nikon D5600?

A: Yes it will in Manual mode

Q: 9. Will this power a lectrosonics src receiver?

A: Yes it will. But there is also a dedicated SR receiver battery sled that also has the audio output jacks on the bottom. Part number is SRBATTSLED. It comes in 2 versions, one for top and one for bottom of receiver mounting. a href= https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/604141-REG/Lectrosonics_SRBATTSLEDBOTTOM_SRBATTSLEDBOTTOM_SR_Battery.html/aa href= https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html target= _blank https://www.bhphotovideo.com/c/product/621589-REG/Lectrosonics_SRBATTSLEDTOP_SRBATTSLEDTOP_SR_Battery.html/a

Q: 10. Will this work with Sony a68?

A: Yes, the Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Sony Multi Interface Shoe would be compatible for use with the Sony Alpha a68 DSLT Camera. Do note that the Vello FreeWave Fusion is a manual wireless transmitter, and as such, you will have to set the flash output power on your flash manually.