The MICRO Series M3-R Retrofit Long Stem Adapter by Triad Orbit is designed to retrofit conventional stands and boom arms with MICRO-R and IO-R aftermarket components and provides an instant upgrade in functionality. It allows you to take a standard mic stand and add M3-R flexibility to place devices in the desired location. The MICRO and IO retrofit aftermarket components are equipped with traditional 5/8" threads for universal compatibility.

Retrofit Standard Microphone Stands    Swivel Ball Joint    Standard 5/8" Threads    Use with Mics, Lights & Cameras

Related Questions and Answers

Q: 1. Will this connect the IO Utility Laptop Desk to my Manfrotto tripod?

A: with the impact Short Double-Female Round Spigot with 1/4"-20 and 3/8"-16 Threads https://www.bhphotovideo.com/c/product/1305583-REG/impact_srp_101p_round_short_adapter_with.html?sts=pi&pim=Y

Q: 2. The Kali IN-5-C already comes with a backing plate almost identical to this. But Kali say the original IN-5 is not suitable for wall mounting. So is this for the original IN5 or not?

A: Yes, the Triad-Orbit Mounting Plate for Kali IN-5 Speakers is intended for use in wall mounting a single Kali Audio IN-5 3-Way Studio Monitor. You can see how it is attached to the wall and to the speaker in the photos shown on the item page.

Q: 3. is this compatible with a Leica M11?

A: Yes, the Match Technical Bop-O Soft Shutter Release Button (Black, Long Stem) will work on the Leica M11.

Q: 4. What is the length of the T3 Tall Tripod when collapsed for travel and transport?

A: Thank you for your inquiry. The T3 stand can collapse down to 31 inches for transport. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 5. Can the ballast bag be emptied for travel, or would you recommend against it?

A: According to Triad-Orbit, you could theoretically unzip the bags and empty them, but the zipper is slightly hidden. The steel shot is in a secondary, thinner zippered pouch inside the main bag. The only downside would be filing it wherever you're traveling to. For example, using dry sand would have less than half the weight of the ballast material that the bag currently has inside.

Q: 6. Is there a similar stand - with a squeeze-handle for raising and lowering, for a video camera? Cam. is just a few lb.

A: We do not offer a tripod stand system similar to the Triad-Orbit T3C Rolling Tripod Stand and VESA Video Display Mount Kit (B&H # TRT3CMK) (B&H Kit), that features a squeeze handle colum lock release.

Q: 7. what is the load capacity?

A: Not rated for weight. Designed for microphone for use. It is very rugged and robustly built. it should be able to handle any microphone.

Q: 8. Does this zoom stick work with the Fujinon 19-90 or 20-120 lenses? Thanks.

A: The Chrosziel Long Zoomstick for Fujinon MK or Zoom with M3 Thread (5.1") can be used on the Fujinon ZK19-90mm T2.9 Cabrio Lens (PL Mount) and any other lenses that provide an M3 thread.

Q: 9. What is the load capacity of the T2 tripod?

A: Dear Chris,Thank you for your inquiry. Our Triad stands are rated to hold up to 35lbs (16kgs) before the top tube may start to lower. However, depending on how much you tighten the top clutch, you may see a lower or higher capacity. I hope that this answers your question, but if it doesn't, please let me know and we will find the right solution.Sincerely,Richard CarriganTriad-Orbit Support Teama href= http://www.Triad-Orbit.com target= _blank www.Triad-Orbit.com/a

Q: 10. Collapsed/disassembled length?

A: While the manufacturer does not specify the collapsed length of the boom arm, we would estimate around 19'' based on maximum length photos from their website.