The Miller 75 Sprinter II 2-Stage Carbon Fiber Tripod is a quick-setup solution for a tripod head with 75mm ball base. Its lightweight, dual-action flip locks and rigid carbon fiber construction allow for durability without compromising usability in ENG, EFP, and other pro video applications.

Unlike many traditional multistage designs, both flip locks are located on the same section for easy reaching, no matter the height setting. The feet have integrated steel spikes to add stability on rough or uneven terrain. The fast setup is complemented by an in-line carry handle for portability on set or in the field. Compatible ground spreaders, rubber feet, and dollies are available separately.

For Heads with 75mm Ball    Two-Stage, Three-Section Legs    Supports up to 66.1 lb    17.3 to 60.4" Height Range    Carbon Fiber Construction    Outfitted for Ground Spreader    Built-In Carry Handle

Two-stage carbon fiber tripod for heads with 75mm ball

Maximum payload up to 66.1 lb

Compatible with separately available ground spreader

Height extends from 17.3 to 60.4"

Built-in carry handle for portability

Related Questions and Answers

Q: 1. If not using full height, would it extend the thicker sections first before the thinner ones?

A: Yes, that will be possible if not using it at full height.

Q: 2. What is the lowest height that this tripod will go?

A: The lower the 1589 Sprinter II will go is 26.4 .

Q: 3. It can support up to 44lbs, but are their any 75mm heads that support more than 20lbs?

A: The Miller 1036 is a 75mm Head with a 26.46 pound load capacity, B&H # MI1036. We also have the Libec RH45D which has a 26.5 lb capacity, B&H # LIRH45D.https://bhpho.to/2yO7Ffjhttps://bhpho.to/2hqIeZt

Q: 4. Can the flowtech 75 be adapted to fit a 100mm head? If so which adapter works best?

A: The Sachtler flowtech 75 legs will only accept 75mm bowls. For compatibility for both 75mm and 100mm bowl tripod heads the Sachtler flowtech 100 MS Carbon Fiber Tripod (SKU: SA5585) would support 100mm bowls as well as a 100mm to 75mm adapter such as the Sachtler SA3906 to support 75mm bowl heads. https://www.bhphotovideo.com/c/product/1431234-REG/sachtler_5585_flowtech_100_ms_carbon.html/accessories https://www.bhphotovideo.com/c/product/78905-REG/Sachtler_3906_Adapter_75_100_75mm_Ball.html?sts=pi&pim=Y

Q: 5. Does it fit in a pelican air case?

A: For the tripod legs, the Pelican 1615AirTP Wheeled Check-In Case with TrekPak Insert (Black) BH #PE1615ACTPBK • MFR #016150-0050-110 can be looked into. https://bhpho.to/3956Vkf There are as well dedicated tripod hard cases for tripod systems which can be viewed here. https://bhpho.to/34THZst

Q: 6. Is this tripod compatible with the following spreaders?https://www.bhphotovideo.com/c/product/598801-REG/Miller_993_993_Mid_level_Spreader.htmlIs this tripod compatible with the following Feet? https://www.bhphotovideo.com/c/product/254597-REG/Miller_475_475_Rubber_Feet_Pads.html If these are not compatible can you recommend the items that are?

A: no this is not compatible with the Miller 993 Mid-level Spreader

Q: 7. Are there other accessory mounting options besides using the Miller Air Accessory Mounting Block on the Miller Air Carbon Fiber Tripod?

A: At this time the the Miller Air Accessory Mounting Block is the only known accessory that can be attached. The size of the attachment screw is not known; probably it is a metric size. You can consider articulating arms with a clamp. Here is one suggestion: GyroVu Adjustable Clamp with Heavy Duty 11 Articulated Arm Monitor Mount B&H # GYGVCM11H Note: it is special order.

Q: 8. How much does it weigh?

A: 2.5kg (5.5lbs)

Q: 9. Please let me know which Miller tripod case comes with this tripod Miller Air Carbon Fiber Tripod System B&H # MI3005 MFR # 3005I don't see a link. Also, on Miller Sticks I have a Sachtler DV6 head. I measured about 33 from the head to the feet. I'm guessing a 35 tripod case would be fine. That's why I would like ton know which Miller tripod case this is? I have the same Miller Sticks as I mentioned above. Thank you Jimmy

A: For future reference, please look under the Accessories tab for Bags & Cases. Of the seven we offer, I would suggest these based on economy to best choice to luxury. For budget: Ruggard Deluxe Padded 35 Tripod Case (Black) B&H # RUBD3035. For rugged airplane travel: SKB Roto-Molded Tripod Case with Wheels (37 Tall) B&H # SK1SKBR3709W For luxury: Porta Brace TLQB-39XT Quick Tripod/Light Case (Black) B&H # POTLQB39XT.

Q: 10. Will this tripod work with the Sachtler Ace fluid head, that I think is 75mm also?

A: Yes, and they're currently selling it as a bundle for 11% off.