Enjoy detailed audio and a broad soundstage with the piano gloss black SVS Prime Pinnacle Floorstanding Speaker. It has a 29 Hz to 25 kHz frequency range for enhanced highs, bass, and mids from its 1" tweeter, 5.25" midrange, and three 6.5" woofers. It has an 8 x 13.9" footprint with the grille on and supports 8 ohm impedance levels with a recommended power handling of 20 to 300W.

Open Box Products Have a Limited 5-Year Manufacturer Warranty    20 to 300W Recommended Amplifier Power    3-Way Speaker Design    3x 6.5" Woofers    5.25" Midrange Driver    1" Aluminum Dome Tweeter    29 Hz to 25 kHz Frequency Range    Three Rear-Firing Bass Ports    5-Way Binding Posts

The midrange driver is designed to deliver pinpoint accuracy and a broad soundstage for immersive audio experiences.

The tweeter is engineered to render clear highs with lifelike realism, even at high volumes. Its distortion-resistant design helps provide enhanced clarity and accuracy. The FEA-optimized diffuser is designed to ensure broad dispersion for a wide soundstage with pinpoint on- and off-axis frequency response to engage listeners across the whole room.

The three-woofer design provides deep bass extension and helps convey subtle musical details as well as dynamic movie sound effects.

Individual tuning frequencies and separate sub-enclosures for each port helps ensure that all drivers blend together seamlessly for smooth driver-to-driver transitions, accurate frequency response, enhanced refinement, and crisp speed in transients, without sacrificing deep bass.

The SoundMatch crossover helps create an expansive soundstage with accurate frequency response and precise imaging. It's tuned so that each driver blends seamlessly with each other while offering augmented on- and off-axis frequency response. The crossover's topology and architecture are consistent across all SVS speakers, so you can integrate it within a system that includes the Prime or Ultra series.

Four self-contained, acoustically tuned internal chambers help eliminate the potential for resonance or sonic artifacts from the enclosure for pristine audio playback across the frequency spectrum. The tapered edges on the front baffle, known as chamfers, are designed to minimize edge diffraction for a clear and precise soundstage, while features like shorting rings and tweeter diffusers provide additional acoustic enhancements.

The Prime Pinnacle is designed to fit seamlessly in nearly any room layout or décor. At only 8" wide, it's slim enough to place next to furniture or near a wall while outputting enhanced power and sound quality.

• Cloth grille with pin/cup retention system
• Aluminum dome tweeter for augmented transient response
• Aluminum woofer and midrange shorting rings help reduce gap inductance, lower distortion, and enhance high frequency response
• Cast ABS-fiberglass composite basket designed to ensure precision component alignment and augmented thermal transfer
• Vented voice coil former in midrange and woofers help aid in minimizing air compression artifacts
• 3-way crossover with air-core inductors and heavy-trace printed circuit boards
• 2-piece PCB design helps reduce component interference
• Separate sealed midrange enclosure with angled bracing designed to diffuse and shift standing waves beyond the driver pass band for enhanced sound quality
• Acoustically transparent and FEA-optimized grille helps minimize diffraction

Related Questions and Answers

Q: 1. Are these speakers sold by singles or a pair?

A: This is sold as a single speaker only.

Q: 2. what is max spl output of the svs pb16ultra?

A: The standard for measuring subjectively clean maximum dynamic output is CEA-2010. There are accurate 3rd party measurements available for the PB16-Ultra at the below link. These were obtained outdoors, away from reflective structures, with the mic on the ground plane at a distance of 2 meters. Indoor SPL will naturally be considerably higher than these measurements with boundary reinforcement and room gain considered.a href= https://www.audioholics.com/subwoofer-reviews/svs-pb16-ultra-subwoofer target= _blank https://www.audioholics.com/subwoofer-reviews/svs-pb16-ultra-subwoofer/aEd M - SVS

Q: 3. Its International Warranty?

A: The Sony SS-CS3 speaker has a one year Sony US warranty only.

Q: 4. What is the ideal speaker wire to get for these speakers? What's the highest gauge can I use with these speakers?

A: I suggest using 14-gauge speaker wire for cable runs up to 100' feet. Anything heavier is simply wasteful if you are using a quality, sufficiently powered amplifier/receiver.

Q: 5. Hi is this compatible with any receiver example vsx-532 pioneer

A: The SVS PB16 will be compatible with any receiver that uses RCA connection to connect an external subwoofer.

Q: 6. Is it dual voltage? Can it be used in 230v power socket?

A: This subwoofer requires 100-120 V 60 Hz. You cannot use 230 V. SVS does sell high voltage subs in other markets, outside of the United States.

Q: 7. Can I request the 220V version?

A: We are not able to get the 220V model.

Q: 8. What is good receiver for this speaker? Thank you so much?

A: Sony STR-DN860 7.2-Channel Wi-Fi Network AV Receiver B&H # SOSTRDN860

Q: 9. What is the country of manufacture?

A: It is made in China.

Q: 10. # What type is the connecting port of SVS Prime Pinnacle (Premium Black Ash) Speaker?

A: 5-Way Binding Post Pair