Store, transport, and protect your Line 6 Helix or Kemper Profiler guitar effects processor and floor controller with the iSeries 2317-14 4U Flyrack Case from SKB. The case holds a foot controller in the top tray and a processor below. The ABS-plastic and foam-constructed top tray features holes that custom-fit the foot controller feet and prevent your equipment from moving within the case. Below the top tray is a 4 RU injection-molded rack frame that holds a guitar effects processor. There is an additional space for an accessory such as a power supply or a recording interface.

Guitarists will appreciate the waterproof design with gasket sealing and the automatic pressure equalization valve. Rubber pullout handles and wheels facilitate easy carrying. For security, the case features latches with padlock holes for attaching optional locks.

For Kemper Profiler and Line 6 Helix    Holds Foot Controller & Guitar Processor    Custom-Cut-Foam Top Tray    4U Removable Injection Molded Rack Frame    Additional Space for Accessory    Pull Out Handles and Wheels    Trigger-Release Latch System    Waterproof with Gasket Sealing    UV/Solvent/Corrosion/Fungus Resistant    Automatic Pressure Equalization Value

Removable 4 RU injection-molded shock-rack cage

Top tray custom-fits a Line Six Helix or a Kemper Profiler remote foot controller

Interior design with foam for added protection

Built-in wheels and pull handles

Polypropylene copolymer resin construction

Resistant to UV, solvents, corrosion, and fungus (MIL-STD-810G)

Waterproof case with gasket sealing (MIL-STD-C-4150J)

Automatic ambient-pressure equalization valve (MIL-STD-648C & IP67)

Molded-in hinges for added protection

TSA-acceptable, trigger-release latch system

Under 62 linear inches

Over-molded, rubber cushion-grip handles

Integrated latches accommodate separately purchased locks

Related Questions and Answers

Q: 1. does it include any screws?

A: Screws are not included. One may consider purchasing Raxxess # RAPTSW25.

Q: 2. is it also water resist?

A: The canvas bag is fairly heavy duty ... so it could with stand a little bit of moisture ... i.e. walking from vehicle to building in rain ... but I certainly wouldn't leave it anywhere it could get wet for any length of time since it stores electronics. It is not coated or treated for water resistance.

Q: 3. Do the Rokinon Xeen fit?

A: Xeen's fit, but not well. The 16mm is a good fit, but the other lenses are taller than the holes, so about an inch of the lens hangs out. The case can still close, but it's tight. I bought this case specifically for my Xeen's and will be returning it because it's not a correct fit.

Q: 4. Do you have a hard case for lenses of 95mm diameter? Thank you

A: We do not have any lens cases taht specifically say that they accommodate 95mm diameter lenses. This fits lenses up to 125mm in diameter. if you have lenses that are 95mm they will fit. If you want a case with a more snug fit then you may want to check if there are customized case solutions for your particular lens set.

Q: 5. I wanted to know if the length of the Zeiss CP.3 100mm and 135mm fit in to this case. I know that the diameter will fit and it won't be a snuggle fit. But what about the length.?

A: Each lens slot has a base depth of 120mm. The useable lid depth is 35mm and yields a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm to accommodate shorter lenses. The Zeiss CP.3 100mm and 135mm's lengths are 126.5mm. So yes, the case is deep enough these lenses. Please read the overview section for these details.

Q: 6. will it fit Sigma Cine 14, 24, 35, 50, 85mm PL lenses?

A: The SKB iSeries Watertight Lens Case will fit the Sigma Cine 14, 24, 35, 50, 85mm PL lenses?

Q: 7. How well does thius fit the Mackie DL-1608? Looks like it will work fine...

A: The case has Custom-cut PE foam to fit the QSC TouchMix-8. It has a removable foam section to fit the TouchMix-16. I would advise getting a case that was designed for the Mackie as well.

Q: 8. last question: Do the Rokinon's travel from side to side in the cutouts? I noticed the holes are 125mm and all the Rokinons are 90-100mm in diameter.

A: If the lenses are smaller than 125mm, then yes they will move back an forth in the holes. I would say that damage would be unlikely. However, I would suggest for peace of mind getting an empty case and filling it with foam and doing your own cut outs.

Q: 9. How much does the case and rack weigh empty?

A: The SKB iSeries 2317-14 4U Flyrack Case for Line 6 Helix / Kemper Guitar Processor and Foot Controller has a specified weight of 31.4 lb / 14.2 kg.

Q: 10. How much weight can the handles / strap support?

A: SKB has not provided a weight limit for the SC193U Soft Rack Case.