Featuring a corrugated plastic viewfinder guard compartment that helps protect your camera's viewfinder from shocks and knocks, this blue Porta Brace Padded Carry-On Camcorder Case with Reinforced Viewfinder Guard is a soft-sided camera bag designed to protect your camcorder during transport and storage. It holds the camera with lens and viewfinder attached, and features a 1000D Cordura nylon shell with interior padding that safely cushions your camcorder yet weighs only 5.5 pounds. A removable padded lens support is included to help protect your lens or stop the camera body from shifting during transport. An integrated seat belt retainer strap comes in handy when transporting your gear on a car seat. The 1000D Cordura shell is abrasion-resistant and provides foul-weather protection.

Two large front pockets feature hook-and-loop closure and are suitable for carrying larger spare items and cables when traveling locally. On the back of the case are two zippered mesh pockets perfect for holding papers or other slim items. An interior slip pocket is well suited for holding the included white balance card. The nylon mesh handles are covered in suede for durability and provide a soft griping surface. An included adjustable padded shoulder strap also features a suede covering. The bottom panel features a non-skid water-resistant bottom, and the exterior of the EVF compartment has an ID card window sewn into it.

For Pro Camcorders up to 26" Long    Reinforced Viewfinder Guard Compartment    1000D Cordura Nylon Case    Interior Padding    Padded Lens Support Included    Two Large Exterior Pockets    Removable, Suede Shoulder Strap    Dual Suede Leather Handles    Non-Skid, Water-Resistant Bottom Panel    ID Card Window

The 1000-denier Cordura nylon case provides an interior pillowing system consisting of extra-thick padded foam side walls for carrying and protecting a camcorder and accessories.

The bag features a corrugated plastic reinforced viewfinder guard. This accommodates and protects the EVF of full-sized ENG camcorders, so you can travel with the viewfinder attached to the camera and be ready to shoot when you arrive at the location.

The included stuffer pillow is a soft nylon foam block which can be positioned under long lenses to provide extra support during transport, or positioned against the camera body to keep it from moving.

• Two exterior mesh pockets
• Dividable tripod plate pocket
• One interior mesh pocket

• Removable, suede leather-covered shoulder strap attached to a heavy-duty swivel clip
• Suede leather-covered handles
• Seat belt loop secures case to car seat belt

Related Questions and Answers

Q: 1. Could a 5.3x7.3x9.4in drive in this case with the pick-n-pluck?

A: The interior dimensions of the Pelican 1507AirWF Hard Carry Case with Foam Insert and Liner (Black) are 15.2 x 11.4 x 8.5" / 38.6 x 29 x 21.6 cm, and they allow you to place an object that is 5.3 x 7.3 x 9.4" in size inside of it when using the Pick 'N' Pluck foam.

Q: 2. What are compatible third party lid organizers (other than the simple zip portabrace one)?

A: The PortaBrace Hard Carry-On Case with Customizable Dividers seems to only be compatible with the one by PortaBrace. Third party ones that we carry are made for other cases.

Q: 3. Will this fit my Nikon 18-140 mm AFS-DX lens or should I get a different size?

A: Yes, the Porta Brace 4" Padded Lens Cup (Blue Tab), B&H # POPB4LCB, would be compatible for use with the Nikon AF-S DX NIKKOR 18-140mm f/3.5-5.6G ED VR Lens.

Q: 4. I don't think this is carry on approved case.......at least for international flights.Foe example.......KLM to Europe....The dimensions on their website are 21.5x10x13.5 in.I'll fly to Europe next month and all my bags are too big.....Any advice?

A: The dimensions of carry-on luggage would be determined by the airline on which you will be traveling. According to KLM Royal Dutch Airlines website, a piece of hand baggage (carry-on luggage) may measure 21.5 x 10 x 13.5 in in size. While close in size, the exterior dimensions of the Pelican 1525Air Carry-On Case are listed as 21.96 x 13.97 x 7.49 , which are slightly over the dimensions listed by KLM. The closest case similar in size and build would be the HPRC 2530 Waterproof Hard Case with Cubed Foam (Black), B&H # HP2530FB, but it is still a few millimeters too wide for the carry-on size. It's exterior measurements are 21.3 x 13.8 x 6.0 , and would depend on how the airline measures the case as to if it will work (you may wish to contact the airline directly with the listed measurements). The closest case in build and size that we carry that fall under the regulations in all dimensions would be the Plano Large Designed Series Case, B&H # PLCDLB. While slightly smaller, other options you may consider would be either the Ape Case ACHC5600 Large Hard Case (Black/Gray), B&H # APACHC5600, the Lowepro Hardside 300 Photo Waterproof Hard Case with Removable Backpack (Black), B&H # LOH300CB, the Pelican 1485AirTP Compact Hand-Carry Case (Black, with TrekPak Insert), B&H # PE1485ACTPBK, or the Pelican iM2300 Storm Case with Padded Dividers (Black), B&H # PEIM2300DB.

Q: 5. Will this fit a BenQ TH585 & a 16" MacBook Pro?

A: Yes: Porta Brace PR-C3 Specs Interior Dimensions 17 x 13.25 x 5" / 43.18 x 33.66 x 12.7 cm Ben Q 585: Dimensions (W x H x D) 12.3 x 4.3 x 8.9" / 312.0 x 110.0 x 225.0 mm Mac Book Pro : Dimensions 14.09 x 9.68 x 0.64" / 35.79 x 24.59 x 1.63 cm

Q: 6. Is the Porta Brace DVO2U-QS-M4 a true 18x10x10? This important to fit the rig with Matt box that is 9" wide.

A: The interior dimensions of the PortaBrace DVO2U-QS-M4 DV Case with QS-M4 Quick Slick Mini Rain Cover (Signature Blue) are (L x W x H) 18.00 x 10.00 x 9.0" / 45.7 x 25.4 x 22.9 cm. Portabrace provides this info and we believe it to be correct with this case model.

Q: 7. The dimensions listed here and on Porta Brace's website don't match. Will this fit a 15.6x6.2x12.4 projector?

A: Per PortaBrace: Weight: 4.30 lb / 1.95 kg Interior: 17" x 5" x 13.25" / 43.18 x 12.70 x 33.66 cm Exterior: 22" x 8.25" x 14.5" / 55.88 x 20.96 x 36.83 cm Thank you for bringing this to our attention.

Q: 8. Can you provide the internal dimensions?

A: The PortaBrace Soft Padded Carrying Case for Canon XA55 (B&H# POCSXA55) has internal dimensions of 18 x 7 x 8.5" (45.7 x 17.8 x 21.6cm).

Q: 9. Is it possible for the Sony fs7 to fit if the bag if the veiwfinder is not on?

A: This bag might be just a bit to tight for the Sony FS7. However Porta Brace does make some bags geared specifically for the FS7 that I think would be more appropriate. There is even a version that allows you to have the viewfinder on, the RIG-FS7XT.

Q: 10. Actual dimensions? The specs say "18x10x10" but I have the " 17 x 8 8.5" selected. I want the "18x10x10" but dont want the rain cover it make you purchase if you actually select the "18x10x10". Is this product "18x10x10" even though i have the "17 x 8 8.5" selected?

A: The interior dimensions of the PortaBrace DVO-2 DV bag are 17 x 8 x 8.5". Apologies for the error on the listing. We are fixing it now.