AIDA's 20x Full HD IP Broadcast PTZ Camera offers four simultaneous video outputs, all supporting up to 1080p60 resolution. While the SDI, HDMI, and USB outputs must be set at the same resolution, the IP streaming port can output at a different resolution at frame rates from 1 to 60 fps.

The camera features RS-232 input/output for serial control. It uses the VISCA control protocol and TCP/IP and RTSP/RTMP IP protocol. Up to 10 presets can be assigned and managed via the included IR remote controller, and up to 128 can be managed over serial control. Other features include a motion-compensated temporal noise reduction filter, which allows for noise reduction without blur.

Simultaneous SDI, HDMI, USB, IP Outputs    RS-232 I/O, VISCA, TCP/IP, RTSP/RTMP    Up to 128 Presets over Serial Control    Motion-Compensated Noise Reduction

• Simultaneous SDI, HDMI, USB, and IP outputs
• Up to 1080p60 resolution video output
• H.264 / H.265 streaming
• RS-232 input/output
• VISCA control protocol
• TCP/IP, RTSP/RTMP IP protocol
• 10 presets via included IR remote controller, 128 presets over serial control
• Motion-compensated temporal noise reduction filter allows for noise reduction without blur
• SMPTE 424M/292M standard
• Built-in OSD controls
• 4:2:2 (YCbCr) 10-bit color space
• White Balance: auto, manual, auto tracking, one push, indoor, outdoor
• Auto shutter speed

Related Questions and Answers

Q: 1. Can I mount it in vertical position?

A: You can mount this on to a wall vertically, however the camera itself would not be vertical. You would use a wall mount like this which allows it to sit as it is supposed to. https://bhpho.to/2YD3Ofp

Q: 2. Can I control this camera from an off site remote location using the IP address? or does the controller need to be physically attached to the unit?

A: IP control allows you to control the camera from any location where you can be connected to the same network.

Q: 3. Can it be mount on a tripod?

A: Yes it can. This camera has a standard tripod threading under it.

Q: 4. Will work with a extended usb cable?

A: yes this will work with an extended USB cable

Q: 5. Does this support PoE?

A: No PoE features are defined for this product.

Q: 6. What is a good general purpose microphone for this camera?

A: Following unit does not adapt to audio.

Q: 7. What Poe Switch is Recommended to power 2 of these camera?

A: Here are two possibilities. Netgear GS108-400NAS ProSAFE 8-Port Gigabit Switch BH #NEGS108400NS • MFR #GS108-400NAS(---- Please copy and paste either number into a B&H search box) Cisco SG110D 110 Series 8-Port Unmanaged Network Switch BH #CISG110D08 • MFR #SG110D-08-NA(---- Please copy and paste either number into a B&H search box)

Q: 8. Will this work with the PTZOptics PT Joy Stick G4 or, Superjoy controllers using IP?

A: Yes, the AIDA Imaging Full HD NDI|HX Broadcast PTZ Camera with 20x Optical Zoom would be able to be controlled by the PTZOptics SuperJoy NDI|HX/IP & Serial PTZ Camera Joystick Controller or the PTZOptics PT-JOY-G4 IP/Serial Joystick Controller (4th Generation) over IP using VISCA-over-IP.

Q: 9. Can I use my ATEM Mini Pro ISO to control the PTC on this camera?

A: No it can not. The ATEM Mini Pro is only able to control Blackmagic Cameras. We recommend purchasing controllers made by the Manufacturer of the PTZ camera (in this case AIDA) to get the best experience with camera control.

Q: 10. Which physical joystick controller is suitable for this camera?

A: We recommend using the Lumens VS-K20 and Marshall Electronics VS-PTC-200. This AIDA PTZ camera has an 8-Pin Mini-DIN (RS-232, VISCA) output. https://www.bhphotovideo.com/c/product/1156251-REG/lumens_vs_k20_compact_camera_controller.html https://www.bhphotovideo.com/c/product/1216267-REG/marshall_electronics_vs_ptc_200_compact_ptz_camera.html