The Aluminum Lens Cap from Thingyfy is designed to slip onto the front of the 58mm diameter sized Pinhole Pro and Pro S lenses. With the cap on, it provides protection to the front of the lens against water, dust, and debris.

Designed for 58mm Diameter Lenses    Slip-On Design    Aluminum-Constructed Cap    Provides Protection to the Lens

Pinhole Pro and Pro S lenses.

Related Questions and Answers

Q: 1. Will it fit AF-S Nikkor 35mm 1:1.8G? Nikon sent me the wrong one.

A: The Nikon 58mm Snap-On Lens Cap is too large for the Nikon AF-S DX NIKKOR 35mm f/1.8G Lens. Instead, you need the Nikon 52mm Snap-On Lens Cap: https://bhpho.to/3p7Rcxs

Q: 2. Does anyone know if this slip on lens cap fits the Panasonic ZS100?

A: Unfortunately the Kaiser push on cap will fall off the ZS100. When the camera is turned off, the lens is retracted. The ZS100 has a built in guillotine style lens cover that automatically covers the lens when powered down so an accessory lens cap is not needed.

Q: 3. Have Canon EOS 18-55mm lens, thread size 58mm. Will this lens hood fit and work okay?

A: No, Sensei PRO 58mm Aluminum Lens Hood BH #SELHM58 works best for lenses 50mm and Longer (Full Frame). For the Canon EF-S 18-55mm f/3.5-5.6 IS II Lens BH #CA1855EFS, we would recommend the Sensei PRO 58mm Wide Angle Aluminum Lens Hood BH #SELHMW58 https://bhpho.to/2Y6OWDk.

Q: 4. will this cap fit the Nikon D3100 18-55mm lenses?

A: No. The Nikon 18-55 lens is a 52mm diameter. Consider B&H # NILC52 or B&H # SELC52

Q: 5. Does the AF-S Nikkor 50 MM. take a 58-mm lens cap?

A: Yes it does, same as the filter size

Q: 6. I have the nikon cool pix p530, does this lens cap fit. I have had the camera for like a week and already lost it. Please tell me which cap is correct. Thank You

A: This is not the correct lens cap for the Nikon P530. You will need the Nikon LC-CP24 Lens Cap: http://bhpho.to/1jtqVQj

Q: 7. Which cap do I need for my 50mm lens?

A: It depends on your 50mm lens model. AF lenses use a 52mm cap and AF-S lenses use a 58mm cap.

Q: 8. Will this fit my sigma art 50mm?

A: The Sigma LCF-77 III 77mm Lens Cap, BH # SILCF773 is the proper cap for your lens.

Q: 9. Will this be compatible with the Fuji 18-55 kit?

A: As the Fujifilm XF 18-55mm f/2.8-4 R LM OIS Zoom Lens uses 58mm filter threads, the Sensei PRO 58mm Aluminum Lens Hood would fit onto the lens. However, as indicated under the Overview for the lens hood, it is designed for APS-C lenses that have a focal length of 28mm or longer, so there is the possibility of vignetting when using the lens set wider than 28mm (between the 18-28mm range of the lens). I would therefore recommend either using the dedicated lens hood that came with the lens, or consider the Sensei PRO 58mm Wide Angle Aluminum Lens Hood, B&H # SELHMW58, which is designed for APS-C lenses up to 18mm wide.

Q: 10. Will this cap fit a Sony RX100M7?

A: No