The V-mount Helix Prime 190Wh Dual-Voltage Battery from Core SWX is a professional battery designed for modern production workflows involving a wide range of equipment. The compact design means the battery takes up less space than previous-generation models to better fit gimbal stabilizers and other rigs where space is at a premium. Though the design is less space-consuming, the Helix Prime provides the same 190Wh capacity as its predecessors. To support various equipment types from small accessories to larger cinema cameras and lights, the Helix Prime supports a 12.8A, 14.8V continuous draw, and it also supports simultaneous dual-voltage output with a maximum load of 6A at 28V and a maximum load of 12A at 14V.

The Helix Prime features two 12V D-Tap outputs that can be used to power a camera, light source, monitor, recorder, or other power-hungry equipment. The LCD battery status display screen on the rear of the battery is backlit with a cool white illumination, and updates every few seconds to accurately reflect up-to-the-moment statistics including the runtime. The battery also includes RFID which allows you to connect an RFID reader app to monitor battery information remotely. Another handy feature is the ability to charge or discharge to 30% for safe storage or air transport using Voltbridge technology.

The battery itself is housed in Core SWX's classic overmolded casing with a rubberized finish that is resistant to impact and is easily grippable.

190Wh Lithium-Ion V-Mount Battery    Supports up to 12.8A Draw at 14.8V    12A at 14V, 6A at 28V Maximum Load    Backlit Status LCD Display    4-LED Power Gauge    2 x 12V D-Tap Accessory Outputs    Storage/Fly Mode Settings to 30% Charge    Compact, Molded Rubberized Case Design    Battery Info via Voltbridge RFID Reader    Rated for up to 2000 Charge Cycles

• 190Wh lithium-ion V-mount battery
• Supports up to 12.8A continuous draw at 14.8V
• Dual-voltage output supports 12A at 14V, and 6A at 28V maximum load
• Utilizes Panasonic cells
• Rated at 2000 charge/discharge cycles
• Backlit LCD and 4-LED power gauge
• Voltbridge RFID app support
• Two 12V D-Tap accessory outputs
• Non-slip, rubberized housing
• Storage/fly mode charge/discharge settings to 30%

Related Questions and Answers

Q: 1. Is it compatible with the ARRI A35? Thanks

A: No, the Core SWX Helix V-Mount to ARRI LF and ALEXA Battery Mount Plate is not compatible with the ARRI ALEXA 35 Body & ARRI PL Mount Set (LBUS). Consider the Core SWX Direct Connect Helix Battery Plate for ARRI ALEXA 35 (V-Mount) instead. See the link below: https://bhpho.to/3FDUmOO

Q: 2. Can this battery be used while separated? I know the half with the screen has no V-mount connection, but can the other half act as a slimmer standalone 95wh battery?

A: While you could do so in an emergency, it is not recommended for continuous use. The two halves are designed to work in concert and remain in balance. If you discharge one half, recharging will take longer so the balance can be restored.

Q: 3. Will this work with a RED Camera? I know they have there own HC line, but I wanted to have a beefy battery like this one that's double in power.

A: I have 6 of these with my RED Weapon works great. I use them with my Element Technica Gold module

Q: 4. Will this power the Red V-Raptor XL and Alexa 35?

A: The ALEXA 35 is B-Mount and whichever form factor you went with, would need to be converted to operate this camera. Because the Core SWX Helix 150 Mini 147Wh Dual-Voltage Battery battery has Dual-Voltage mode and can produce 28V output, it CAN power the ALEXA 35. The Core SWX Helix 150 Mini 147Wh Dual-Voltage Battery can also power the RED Digital Cinema V-Raptor, however it must be done with D-TAP, because the battery is too wide to be mounted directly onto the V-Raptor itself.

Q: 5. What is the best Core SWX battery dual charger for this battery?

A: The Fleet Micro series (FLEET-DM2A or FLEET-DM2S) of chargers are the most advanced in the industry. The chargers offer a complete battery management system for your battery “Fleet,” including an on-board LCD to monitor the battery packs’ smart battery data. Besides being the fastest battery charger in the industry today(four 98wh packs in under 2 1/2hrs.), the charger offers a TEST mode to determine battery health and recharge performance. With the inclusion of a micro USB on the rear of the unit, that data can then be viewed and managed with a PC application. The micro USB doubles as an input for future free firmware upgrades(downloadable via the web). In addition to battery management, the Fleet Micro chargers includes SafeFly mode. With one touch of the onboard membrane button console, the charger will either charge the connected packs to up to 30% or discharge to under 30%, depending on the state of charge of those connected. The one-touch operation allows you to quickly prepare all packs for air travel or shipment. This feature can also be applied to a single connected pack. The Fleet Micro series is also the most cross-compatible, able to address not only Core SWX battery packs but those offered by RED, Anton/Bauer, and many more. With this additional charge compatibility, it provides piece of mind that whether you’re on location with multiple crews, charging legacy packs, or your rental Fleet, the Fleet Micro has you covered. The series includes a 90w DC 4-pin XLR power supply to power most cameras. In addition to the on-board power supply, the charger doubles as a battery bank when in “Hypercine” power supply mode(unregulated 12v-16.8v DC). The charger parallels all the on-board battery packs to provide continuous power, and the charger’s LCD reports back available capacity as well as remaining runtime. With the optional “Hypercine module,” the charger provides both unregulated 12v-16.8v 4-pin XLR, as well as 28v regulated 3-pin XLR DC outputs.

Q: 6. Are these batteries compatible with the C500 Mark II?

A: Yes. But the following unit will need to be D-tapped Wooden Camera D-Tap to Canon C100, C100 Mk II, C300 & C500 Power Cable (20") BH #WO249600 • MFR #249600 https://bhpho.to/3P6DGRS

Q: 7. Is there any reason we couldn't use our existing v-mount battery chargers with these?

A: Yes, The Core SWX Helix XL 293Wh Dual-Voltage Battery (V-Mount) should be compatible with existing V-mount chargers.

Q: 8. Is it compatible with the ARRI Alexa Classic?

A: This is defined as being compatible with ARRI ALEXA LF LPL-Mount and ARRI ALEXA SXT PL-Mount.

Q: 9. Can we use regular gold mount charger to charge the dual voltage batteries or do I need the specific dual voltage charger?

A: According to Core SWX, "Along with standard powering applications, Helix charges on all standard v-mount and gold mount Lithium-Ion equipment, including Anton/Bauer, allowing it to seamlessly integrate into your current fleet of battery packs." As such the Core SWX Helix Max 147Wh Lithium-Ion Dual-Voltage Battery (Gold Mount), would be supported by standard chargers.

Q: 10. Why can't this battery be shipped to Australia? It meets the airline safety rules?

A: At this time we do not have a carrier available who is able to ship this battery to Australia. There have been some recent changes in the rules for shipping Lithium Ion batteries. Sorry for the inconvenience. Feel free to contact us directly at provideo@a href= http://bhphoto.com target= _blank bhphoto.com/a with any further questions you may have.