Available for download, the Arturia CZ V is a phase distortion cult classic that models two classic Casio keyboards, the CZ-101 and the CZ-1000, both classic synths used in many hits from the 1980s. The DSP team at Arturia has reverse-engineered the code used inside the seminal keyboards and modeled circuitry like the DAC outputs, doing so in order to give you an authentic Casio sound.

For both synths, the GUI presents you with a relatively simple interface. You won't need to figure out how to use data-entry buttons or small LCD screens. Instead, a streamlined front panel makes manipulating the phase distortion synthesis an intuitive affair. When you need to dive deeper, a graphic interface is on hand to show you all the parameters of the DCOs (digitally controlled oscillators), DCWs (digitally controlled waveshapers), and DCAs (digitally controlled amplifiers) emulated within. 

Other panels such as the Advanced Envelope Control and an Advanced Modulation Matrix allow for tone-shaping in the extreme. You can even go beyond the original timbre of the Casios with the custom phase-distortion editor, which lets you draw and save your own custom waveforms. You'll also appreciate two additional LFOs, a combinator section, macro controllers, and a syncable arpeggiator. 

With an 8-voice unison mode, 32-voice polyphony, an in-depth vibrato section, and more, this software synth will provide interesting sounds in both studio and live environments. The CZ V is compatible with Mac and Windows platforms, and can operate in AU, VST, and AAX formats.

2 Classic Casio Keyboards Modeled    Casio DAC Outs Modeled for Authenticity    Simplified GUI for PD Synthesis    Interface Expandable for Deep Tweaking    Multiple Opportunities for Modulation    Powerful Preset Browser    Resizable GUI    Maps to Multiple MIDI Controllers    AU, VST, and AAX Compatible    Mac & Windows Compatible

• Two synthesis lines and independent noise source
• All CZ-101/CZ-1000 original parameters
• 8 original waveform and custom waveform editor
• Original CZ SysEx import
• CZ, DADSR and multi-segment envelopes (syncable and loopable) to control pitch, DCW, and amplitude
• 2 modulation envelopes
• 4 assignable macros
• Advanced modulation matrix
• A sample-and-hold module
• LFOs with 6 waveforms
• 3 sources combinators 
• Arpeggiator
• 4 FXs slots that can be routed in series or per synthesis line
• A synthesis line state viewer for real-time feedback
• Emulation of the original CZ DAC
• 32 voices of polyphony
• Up to 8 voices of unison with unison detune
• Over 400 factory presets

Search by name or select the appropriate tags to home in on the sonic character you're looking for. You can mark and recall your own favorites, enter comments, and set up playlists.

You can decide whether you want to fill the screen with graphic reproductions of the classic instrument, or whether you want to scale the window down when you're working in a DAW and screen real estate is at a premium. You can also zoom in for detailed work.

The software intuitively maps with the Arturia KeyLab range of controllers and plays nicely with other MIDI controllers too. You can use the software in standalone mode, or implement it within your preferred DAW. You can even play notes using your computer's keyboard when you're on the go.

Related Questions and Answers

Q: 1. is BH an authorized Avid dealer? You are not listed on Avid's website.

A: Yes, We are an authorized Avid Dealer.

Q: 2. If you have a mic pre processor that provides gain, like DBX 286s, is there a way to bypass the interface’s gain?

A: By utilizing the mic preamp on the DBX 286s, you can adjust the gain for your mic at this stage. Then come out line level to the 1/4-inch TRS input of the Aturia Audiofuse. The gain on the unit cannot be bypassed, but with a strong line level signal coming in, there would not be much gain adjustment needed.

Q: 3. Is there a way to record an iPhone or Android via USB into a computer?

A: It would be helpful to have more information about how the phone will be used in your application. If you want to record phone conversations, you could use the JK Audio CellTap 4C Wireless Phone Audio Tap Adapter (B&H # JKCELLTAP4C) and connect the phone's headphone jack to send audio from the phone to the CellTap 4C, then instead of using a traditional audio recorder, send the output from CellTap 4C to the input on a USB audio interface which will connect to your computer via USB. For a simple USB audio interface, you can use the Audio-Technica Consumer ATR2x-USB 3.5mm to USB 2.0 Type-C Audio Adapter (B&H # AUATR2XUSB). Adapters will be needed to connect to the Lightning port on an iPhone and perhaps for the Android phone, depending on whether or not it has a 3.5mm headphone jack. For iPhone, use the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) combined with a 3.5mm TRRS cable like the IK Multimedia TRRS Audio Cable (B&H # IKIPCSTOMP) to connect the iPhone to the "Phone" input on the CellTap 4C, and connect a microphone like the wired Apple headset with a 3.5mm TRRS connector to the "Headset" jack. Then use a standard aux cable like the Pearstone Stereo Mini Male to Stereo Mini Male Cable - Black, 3' (B&H # PEMMSA103B) to connect to the USB audio interface (or a standard audio recorder). For an Android phone with a 3.5mm headphone jack, use the same setup without the Lightning adapter. For an Android phone with USB-C, use the same setup with a USB-C adapter such as the Comica Audio CVM-SPX-UC 3.5mm TRRS Female to USB Type-C Audio-Interface Cable for Android (B&H # COCVMSPXUC) instead of the Lightning adapter. The Arturia AudioFuse Rev2 will allow you to send audio from its output into your phone to use the phone as a recorder. You would not be able to connect your phone to the AudioFuse as an input device via USB because the phone will see it as a charging port.

Q: 4. Does it include the wooden feet as shown in the pics? Thanks in advance

A: No, the wooden legs are not included. This is a brand new item which has not yet been shipped to dealers. At this time Arturia only lists that availability and pricing are to be determined for the wooden legs. More information should be available after the keyboard is in stock so please do check back with us.

Q: 5. Is there a carrying case option?

A: You can use a laptop bag, such as the Case Logic 17" Laptop Messenger Bag, BH #CAVNM217.

Q: 6. Does this one get hot as well? and do i need to power it by dc or can i plug it in by usb for my shure sm7b?

A: This unit can be bus powered without the need of the dc power supply. In doing so, please note that the overall output level of the device is reduced from +24db output to +18db output in order to compensate for the bus power. When possible, it's recommended to always use the power supply.

Q: 7. does this interface work with the rode nt1 without a separate preamp? can i use this interface with beyerdynamic DT 990 pro 250 ohm version?

A: Yes, the Arturia MiniFuse 2 Portable 2x2 USB Type-C Audio/MIDI Interface can be used with the Rode NT1 Large Diaphragm Cardioid Condenser Microphone. The interface has built-in mic preamps and the ability to supply phantom power to the microphone. The 250 ohm Beyerdynamic DT 990 Pro Headphones do work with the MiniFuse 2 at an acceptable volume level, but if you find that you need more power for higher output levels and more headroom, then you will want to use a separate headphone amp.

Q: 8. Can I use 2 different pairs of speakers, either interchangeably (A/B comparison) as well as all 4 speakers at the same time?

A: The Arturia MiniFuse 4 Portable 4x4 USB Type-C Audio/MIDI Interface does have four analog outputs, which could conceivably be routed to four different speakers, but it does not have any switching controls. For A/B comparison between multiple speakers, you would really want to use a monitor controller.

Q: 9. hi what are the dimensions of this key lab thanks?

A: The Arturia KeyLab MKII 49 measures 31.2 x 11.7 x 2.1" (793 x 297 x 53 mm).

Q: 10. Any updates on when the item will be in stock?

A: We do not have a firm date from this manufacturer, but we will notify you as soon as we do if you choose to sign up for an e-mail stock notification right on the product's webpage.