The compact A45Micro 14.4V 43Wh Gold Mount Li-Ion Battery from Bebob is designed to be strong, reliable, and versatile, and it features a Gold mount. It's built to withstand falls from 4.9'; but if it does get damaged, its mechanical components are replaceable thanks to Bebob's modular design. Also, when the battery capacity weakens after years of use, the batteries can be re-celled. To help decide when to re-cell, a status alarm is built into the battery.

Another flexible feature is the 5A twist D-Tap port. Normally you're limited to connecting a D-Tap cable only one way, but the A45Micro's twist D-Tap allows you to plug in your cable either way. The A45Micro also provides a 5V USB port for charging your mobile devices on location.

The A45Micro features lithium-ion trimix cells that offer a 10A maximum draw and a capacity of 43Wh. The 5-step LED status shows green when over 70%, yellow when the capacity drops below 70%, and red when below 50%. It's compatible with Bebob and Anton Bauer chargers. Charging time is approximately 1.5 hours when using Bebob AS2/AS4 chargers.

10A Maximum Load    Compact Size, Gold Mount    5-Step LED Fuel Gauge    Withstands Falls from up to 4.9'    Replaceable Mechanical Components    Re-Cell Capable, Re-Cell Status Alarm    Twist 5A D-Tap    5V USB Port    Bebob/Anton Bauer Charger Compatible

• 10A draw
• 5-step LED fuel gauge
• Withstands falls from up to 4.9'
• Modular design allows any mechanical component to be replaced
• Can be re-celled when capacity weakens after years of use; warns with built-in capacity status alarm
• Twist D-Tap to allow inserting cable either way
• USB port
• Compatible with Bebob and Anton Bauer chargers

Related Questions and Answers

Q: 1. Will this fit on the V-Raptor and Komodo-X's micro V-Lock plate?

A: The bebob MLmicro 14.4V 43Wh V-Mount Li-Ion Battery is a micro sized battery. It should have no issue with connecting to the RED Komodo-X V-Mount plate.

Q: 2. How long does the V45 last? We're thinking of powering a Blackmagic 6K and two Nucleus-M motors with it.

A: According to Bebob, the Bebob V45MICRO 14.4V, 43Wh V-Mount Li-Ion Battery, will last a little longer than 1 hour when powering a Blackmagic 6K and 2 Nucleus-M motors, with the appropriate rig and connector for powering those devices.

Q: 3. Does this battery fits a normal Vmount adapter or it is suitable only for Vmicro adapters?

A: Hi Philippos, the Vmicro battery series fits every normal Vmount adapter. You could use the V150micro with your existing adapters without any problem. Many thanks for your interest!

Q: 4. The usb port is 9V/3A or 5v?

A: The output of the USB A receptacle on the bebob V98MICRO 14.4V, 98Wh V-Mount Li-Ion Battery (B&H# BEV98MICRO) is rated at 5VDC at 1A (i.e. 1000 mAh).

Q: 5. Would having this on a Komodo or v raptor prevent the ski ground loop since the camera doesn’t need to turn off?

A: Even if hot swapping using the bebob MLmicro 14.4V 43Wh V-Mount Li-Ion Battery, to prevent damage to SDI Outputs RED recommends following the instructions at this link: https://bhpho.to/3Ka6I3a.

Q: 6. I assume these can be charged using a Blueshape charger, even though it isn't mentioned in the compatibility list?

A: Yes, you can use a Blueshap charger to charge Bebob Vmicro batteries.

Q: 7. Can this power Aputure LS 300x ?

A: Yes, the output voltage of the Bebob Cine Series is 14.4V, which is perfect for the Aputure LS 300X.

Q: 8. Is this battery will work with Arri Alexa Mini LF?

A: The bebob B290CINE Lithium-Ion 4-Battery Kit with Quad Charger (294Wh, B-Mount) can be used with the ARRI ALEXA Mini LF when used with an adapter plate such as the ARRI B-Mount Adapter Plate, BH #ARK20024113.

Q: 9. Can these fit any v-mount plate?

A: Yes they can. This battery should fit on any V-Mount battery plate.

Q: 10. Will this be able to power smallhd 1303monitor with a Teradek bolt?

A: Hi Samuel, Yes - the 43Wh would power the monitor for about 25min, the 98 Wh version around 50 minutes. Best regards!