This Wine Country Camera 150mm Master Filter Holder Kit is designed for lenses with 86mm front filter threads. It contains a Wine Country Camera 150mm Filter Holder as well as a Wine Country Camera 150 x 150mm Blackstone IRND 1.8 Filter, a Wine Country Camera 150 x 170mm Blackstone Soft-Edge Graduated IRND 0.6 Filter, and a circular polarizer filter. Those IRND filters can be used individually or in combination to improve the results of your photography by preventing overexposure, along with the circular polarizer which serves to prevent distracting reflections or glare.

The kit's Wine Country Camera 150mm Filter Holder allows for the convenient use of up to all three included filters. The Wine Country Camera 150 x 150mm Blackstone IRND 1.8 and 150 x 170mm Blackstone Soft-Edge Graduated IRND 0.6 filters are pre-installed within a Wine Country Camera 150 x 150mm Filter Vault and Wine Country Camera 150 x 170mm Filter Vault respectively. A Wine Country Camera filter vault encases the edges of a filter for use within the filter holder. By encasing the sides of an installed filter, these filter vaults each help to eliminate or limit stray light, which could have unwanted effects on exposure, from coming in between an installed filter, as well as the filter holder and the lens behind it. Additionally, a Wine Country Camera filter vault reinforces an installed filter's rigidity while preventing its sides from having to come into direct contact with a filter holder's slots. This protects those side surfaces and promotes sharp results by ensuring that the filter remains flat.

The Wine Country Camera 150mm Filter Holder includes a dedicated inner slot for the 150 x 150mm filter vault. That slot allows a Wine Country Camera 150 x 150mm Filter Vault within a Wine Country Camera 150mm Filter Holder to be instantly switched with an identical filter vault that may contain a different filter needed for other subjects or changing lighting conditions. An outer slot on the Wine Country Camera 150mm Filter Holder can accommodate a filter vault up to 150 x 170mm in size. The filter holder also features a quick-release button that is dedicated the outer slot. When pressed, it allows a Wine Country Camera filter vault within a Wine Country Camera 150mm Filter Holder's outer slot to be adjusted upward or downwards relative to the subject. When used with a Wine Country Camera 150mm Filter Holder's outer slot, an integrated safety-catch system prevents a 150 x 170mm Filter Vault from accidentally sliding out of the filter holder.

Installation of a compatible filter within a Wine Country Camera filter vault is accomplished by first turning the filter vault's brass, Wine Coin lock into the open position. Located along the front of the filter vault's inner and outer top edges, the Wine Coin is a flat, disk cam lock that features a straight edge on one side and a rounded edge at the other. When the lock's straight edge is aligned with the filter vault's inner edge, a compatible filter can be set within the front of the filter vault. The Wine Coin can then be turned so that its rounded edge obstructs the installed filter, securing it within the filter vault.

Use of the filter holder can be easily accomplished by first screwing the included aluminum-alloy 86mm adapter ring onto a lens with 86mm front filter threads. After being fitted onto the adapter ring, the filter holder's brass locking knob helps to provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, further benefiting the use of graduated neutral density and other filters that are enhanced by varied positioning. Additionally, adapter rings are separately available for lenses with 67mm, 72mm, 77mm, 86mm, 95mm, or 105mm front filter threads. For lenses that have integrated hoods instead of front filter threads, including the Sigma 12-24mm f/4 DG HSM Art lens, the Sony FE 12-24mm f/4 G lens, a Phase One 28mm AF f/4.5 Aspherical or Schneider Kreuznach 28mm LS f/4.5 Aspherical lens, the Sigma 20mm f/1.4 DG HSM Art lens, the Nikon AF-S NIKKOR 14-24mm f/2.8G ED lens, or a Tamron SP 15-30mm f/2.8 Di (VC or non-VC) USD or Tamron SP 15-30mm f/2.8 Di VC USD G2 lens, adapter rings which fasten over those lens' hoods are also separately available.

That included drop-in circular polarizer filter is mounted within a geared aluminum-alloy filter ring, and is made specifically to fit between a Wine Country Camera 150mm Filter Holder and a Wine Country Camera filter holder adapter ring during use. An external knob on the filter holder integrates with the geared filter ring, allowing for the independent rotation of the circular polarizer filter in order to adjust the intensity of the polarization effect. Utilizing aluminum-alloy components for durability while remaining lightweight, the Wine Country Camera 150mm Filter Holder also features rosewood accents over its outer slots. The external polarizer filter control knob is made from rosewood as well, while the filter vaults' fiberglass construction also reduces weight while providing reliable protection for any filters placed within them.

The 150 x 150mm Blackstone IRND 1.8 Filter is a neutral density filter with a 64x filter factor that provides a 6-stop exposure reduction. Its 1.8 density creates a darkening of the entire image, allowing you to photograph with a wider aperture or slower shutter speed than normally required. By slowing exposure time or increasing aperture, you are able to control depth of field and convey movement more easily. Neutral density filters do not affect the coloration of the image and are ideal for pairing with other filters.

The 150 x 170mm Blackstone Soft-Edge Graduated IRND 0.6 Filter from Wine Country Camera is a rectangular filter that helps to darken specific areas of an image, such as bright skies, while allowing for a normal, unaffected exposure in the other regions of the image. The filter is densest at the edge and tapers to clear by the middle, with a soft-edged line of transition between the dense and clear areas. A neutral density filter with a soft-edged line of transition is particularly useful for images that do not have a strongly defined transition between the sky and the foreground. Neutral density filters do not affect the coloration of the image, and this filter provides up to a 2-stop reduction in light from entering the lens.

The design of these Blackstone IRND filters have been optimized for use with digital sensors and to promote nearly flat attenuation of visible and infrared light. Due to imaging sensors' greater susceptibility to infrared light compared to traditional film, color casts can occur when photographing darker subjects that require increased exposure times. To provide neutrality across the visible and infrared spectrums in order to eliminate color casts and ensure cleaner, truer blacks, one layer of Blackstone ND Coating is applied to each of these filters' surfaces. The Blackstone ND Coating is also designed to help minimize any effect on a digital camera's resolution when using these filters which are constructed from Schott Ultra-White Glass for clarity as well as color fidelity and measure 2mm thick.

A Kinesis F422-X Filter Pouch is included which can fit a Wine Country Camera 150mm Filter Holder with an installed Wine Country Camera circular polarizer filter and Wine Country Camera filter holder adapter ring. Wine Country Camera filter vaults placed within this pouch are kept separated by a divider unit that creates five, nonabrasive sections and is secured using hook-and-loop fasteners. The filter vaults and their filters within those sections are kept organized through the use of among six, write-on, hook-and-loop ID tabs. Each tab can be individually moved or removed as needed, while the filter vaults and their filters are protected by a soft and nonabrasive polyester interior-lining, plus closed-cell foam padding against the pouch's front and back.

The included filter pouch is compatible with the Kinesis Attachment Tab System (KATS) for ease of use with Kinesis belts or any belt up to 2" wide, and it can also be carried using the integrated, rear hand-grab loop. Filter vaults and their filters placed within this pouch can be easily accessed by opening its hook-and-loop fastened lid. While using a camera on a tripod, the filter pouch's hand-grab loop can be used to drape the entire pouch over a tripod head. If more length is required during use with a tripod, the filter pouch's included Y208 Quick-Release Extender Strap can be connected to the hand-grab loop's quick-release buckle to provide up to 31.5" of additional length that can be used for over-the-shoulder carrying as well.

This pouch's exterior consists of 500-denier nylon for water-resistance. Two integrated D-rings along the rear side allow for spring-clip shoulder straps such as the optional Kinesis Y215 Basic Shoulder Strap or the optional Kinesis Y315 Padded Shoulder Strap to provide up to 56" or 59" respectively, of additional carrying length.

For Lens with 86mm Front Filter Threads    Wine Country Camera 150mm Filter Holder    Aluminum-Alloy, Rosewood Construction    Solid Neutral Density Filter, 6-Stop    Soft-Edge Graduated ND Filter, 2-Stop    Wine Country Camera Filter Vaults    Two Wine Country Camera Filter Vaults    Limit Stray Light, Protects Filter Edges    Keeps Filter Surfaces Flat    Rotatable, Circular Polarizer Filter

• Durable, aluminum-alloy filter holder with rosewood accents connects to lenses with 86mm front filter threads using included aluminum-alloy adapter ring
• Filter vaults encase the edges of a 150 x 150mm, 2mm-thick filter or 150 x 170mm, 2mm-thick filter for use within the filter holder
• Stray light, which could have unwanted effects on exposure, is limited from coming in between an installed filter, as well as the filter holder and the lens behind it
• Reinforces an installed filter's rigidity while preventing its sides are from having to come into direct contact with a filter holder's slots
• Protects an installed filter's side surfaces and promotes sharp results by ensuring that it remains flat
• Brass, Wine Coin filter vault lock secures an installed filter
• 150 x 150mm filter vault fits dedicated inner filter slot within the filter holder
• Filter holder's dedicated inner filter slot allows instantaneous exchange with an identical filter vault that may contain a different filter needed for other subjects or changing lighting conditions
• 150 x 150mm filter vault or 150 x 170mm filter vault fits outer slot within the filter holder
• Filter Holder's quick-release side button allows immediate upward or downward repositioning of a 150 x 170mm filter vault relative to the subject
• Integrated safety-catch system prevents accidental release of filter vault when using the filter holder's outer slot
• Filter vaults feature fiberglass construction for durability while remaining lightweight
• Filter holder also accommodates included drop-in circular polarizer filter
• External, rosewood knob on filter holder integrates with included, drop-in circular polarizer filter's geared, aluminum-alloy filter ring
• Drop-in circular polarizer filter can be independently rotated to adjust the intensity of the polarization effect
• Circular polarizer filter does not disrupt auto exposure or focus features, is constructed from Schott glass for clarity, and each of its surfaces includes 16 layers of anti-reflection coating
• Polarizer filters help to reduce reflections and glare by filtering out light that has become polarized due to reflection from a non-metallic surface, clears up haze in distant landscapes, and provides more saturated, vivid colors

• 150 x 150mm neutral density filter darkens the image, allowing you to photograph with a longer shutter speed or wider aperture than normally required
• Providing a 6-stop exposure reduction, this filter allows you to control depth of field and convey movement more easily
• Filter does not affect coloration of the image and is ideal for use with other filters
• Each surface includes one layer of Blackstone ND Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times
• Blackstone ND Coating is designed to help minimize the filter's effect on a digital camera's resolution
• Constructed from Schott Ultra-White Glass for clarity and color fidelity

• 150 x 170mm graduated neutral density filter darkens bright areas of an image, such as skies, while leaving the remainder of the frame unaffected
• 4x filter factor provides up to a 2-stop reduction of light in selective areas
• Soft-edged line of transition between the dense and clear areas
• Useful for images that do not have a strongly defined transition between the sky and the foreground
• Filter does not affect coloration of the image and is ideal for use with other filters
• Each surface includes one layer of Blackstone ND Coating that attenuates infrared light as well as visible wavelengths to maintain color neutrality and suppress color casts due to increased exposure times
• Blackstone ND Coating is designed to help minimize the filter's effect on a digital camera's resolution
• Constructed from Schott Ultra-White Glass for clarity and color fidelity

• Can hold a Wine Country Camera 150mm Filter Holder with an installed Wine Country Camera circular polarizer filter and Wine Country Camera filter holder adapter ring
• Accommodates five 150 x 150mm or 150 x 170mm filter vaults and the filters installed within them
• Utilizes the Kinesis Attachment Tab System (KATS)
• Soft, nonabrasive, polyester interior-lining
• Nonabrasive hook-and-loop divider unit, creates five partitions for filter vaults and the filters installed within them
• Easily movable, write-on, hook-and-loop ID tabs
• Closed-cell foam padding along the front and back
• Rear hand-grab loop with quick-release buckle that can be draped around a tripod head or tucked away behind the pouch when used on a belt
• Rear hand-grab loop with quick-release buckle can be extended by connecting to the included Kinesis Y208 Quick-Release Extender Strap for placement over-the-shoulder, or for additional length when draped around a tripod head
• Two rear D-rings allow an optional Kinesis Y215 Basic Shoulder Strap to provide up to 56" of additional carrying length, or an optional Kinesis Y315 Padded Shoulder Strap to provide up to 59" of additional carrying length
• Hook-and-loop lid fastener

Related Questions and Answers

Q: 1. I want to use this adapter with my lens that have an 82mm standard filter thread. Do I need to but this item below separately? Or is it included? https://www.bhphotovideo.com/c/product/1536057-REG/nisi_nip_s5_adsft_82105_82_105mm_adapter_for_s5.html TIA.

A: The 82mm ring is not needed but you will need the S6 holder: https://bhpho.to/3jaFdbR

Q: 2. Does the case pictured come with the kit?

A: The Haida M10 Filter Holder Kit with 77mm Adapter Ring, does come with the case pictured.

Q: 3. Will this adaptor fit around the 112mm filter lens hood that comes with the Nikon Z 14-24mm lens?

A: Yes, this NiSi S6 150mm Filter Holder Adapter Ring can fit over the lens hood equipped with the Nikon Z 14-24mm f/2.8 S lens.

Q: 4. Does this filter set come with the Light Sealing Ring?

A: The two included gaskets form the light seal.

Q: 5. Can this filter system hold NiSi 100mm filters?

A: The Haida M10 Filter Holder Kit with 52mm Adapter Ring can accommodate filters 2mm thick, which is the size of Nisi 100mm filters, so they are compatible

Q: 6. Does this set include the Light Sealing Ring?

A: The two included gaskets form the light seal.

Q: 7. will LEE 100 x 150 filters fit in the Haida M10 filter holder without slipping?

A: Being that Lee 100 x 150mm filters are 2mm thick, the Haida M10 can accommodate them without slipping.

Q: 8. Will this hold a 1.6mm-thick coking Z-pro filter? They are 100 mm wide, but not sure if the thickness will work here

A: Yes, you can that size filter with this filter holder.

Q: 9. Does anyone make a lens cap that can go over the adapter ring so you don't have to remove the ring to put a cap on the lens?

A: There is no dedicated cap that mount on the adapter ring

Q: 10. I have a Canon 80D with 4 Canon lenses - all with 67mm filter threads: 18-135 IS USM, 10-18 IS STM, 100 L Macro, and 70-300 IS II USM. So I would just get the M10 Kit with the 67mm Adapter ring, right? But now I have added the Canon 85mm 1.4L IS USM lens that has 77mm threads. So which is the best way to go? Get the 67mm with a stepup adapter to 77mm? Or a 77mm kit with a step down adapter to 67mm? Or would both options be identical? Can the 67mm ring be stepped up to 77mm?

A: Since most of your lenses are 67mm, then get the kit with 67mm adapters and then just step up to 77mm or you can purchase the 77mm adapter ring separately, either way is fine.