The Heavy Diffuser for Gemini 1x1 LED Panel from Litepanels is a modifier that provides pronounced softness to the bright LEDs.

Softens the Bright LEDs

Related Questions and Answers

Q: 1. Can I fit the Angler softbox on the 1x1 Gemini? https://www.bhphotovideo.com/c/product/1452304-REG/angler_ledsb_1818_led_softbox_for_12x12.html/qa

A: Unfortunately, that Angler softbox cannot work on the Litepanels Gemini 1 x 1 panel.

Q: 2. Can the intensifier be used with the honey comb?

A: No it can't

Q: 3. On Litepanel's website, I read that when powered with a 14.4V Battery, the Gemini 1x1 will work at 90%. But it needs a 26v battery or two 14.4V batteries to work at 100%. But how can we use two 14.4V V-lock batteries if this adapter https://www.bhphotovideo.com/c/product/1461102-REG/litepanels_900_3618_gemini_2x1_with_2.html is only for the Gemini 2x1? Is the only solution is to use the Gold-mount adapter or is there another way to plug 2 V-lock batteries on the Gemini 1x1?

A: According to the specs: DC Input Power 13 to 28 VDC some 26v V-mount batteries will work not all. Or Litepanels Dual Battery Bracket for Gemini 2 x 1 Soft LED Panel (V-Mount) B&H # LI9003618

Q: 4. How well does the Gemini 1x1 fit into a Pelican 1600 case?

A: The interior dimensions of the Pelican 1600 Case are 21.4 x 16.5 x 7.9" which will accommodate the dimensions of the Gemini 1 x 1 which are 12.6 x 12.6 x 4.6".

Q: 5. can you daisy chain power on these lights like you can the 2x1s?

A: You can daisy chain the Xlr but power I am not aware

Q: 6. What's the dimensions of the light with the standard yoke attached? (I'm trying to check if 2 Gemini 1x1 would fit in the following bag without removing the yokes : https://www.bhphotovideo.com/c/product/1437347-REG/tenba_636_553_transport_wheel_case_f.html

A: This case will fit 2 Litepanel Gemini 1x1 Porta Brace Soft Protective Carrying Case for 2 Gemini 1x1 Litepanel (Black) B&H # POGEMINI1X12

Q: 7. Why does the spec section say "Power Input Connector 4-Pin XLR" and the manual says 3 pin XLR?

A: 100% confirmed from our superstore the power input runs off a 3 -pin xlr system....

Q: 8. What is the difference between a standard yoke and the pole oriented yoke?

A: A standard yoke is designed for use on a light stand. To adjust the position of the light fixture, you would lower the stand and use the locking knobs built onto the light fixture to directly adjust the positioning of the light fixture. A pole-operated yoke is typically designed when the light fixture is used overhead or out-of-reach from the light operator. It has two color-coded cups on the yoke that is controlled by a worm gear, which allows you to use a telescopic pole to adjust the pan and tilt positioning of the light fixture from the ground without having to lower the light and/or physically adjust the locking knobs on the light fixture. If you are shooting in a studio and the light fixture will be mounted on a grid or a truss, a pole-operated yoke is usually the more popular option.

Q: 9. Does this come with a bag/case? Or is there any available?

A: It does not come with a case. You could use a Pelican 2750 https://bhpho.to/2tqB64d.

Q: 10. Does the Gemini come with gold mount battery attachment?

A: The Litepanels Battery Plate for Gemini 1x1 (Gold Mount), BH # LI9003703 would be sold separately. https://bhpho.to/35orr1K