Take advantage of the capabilities of your DMX- / Art-Net–controllable LED lighting with the Jands Stage CL Lighting Console. Design, control, and program scenes and chases with this portable LED lighting console that takes advantage of the color and brightness adjustments in LED fixtures (compared to tungsten lighting). Connect to your lights using DMX512 via a 5-pin AXR connector, or to an Art-Net network using the integrated RJ45 connector.

A built-in display screen helps to fine-tune your configuration. You can create and record complex sequences, then play them out at the touch of a button. High-quality 60mm faders, push-button encoders, tactile buttons, and multicolor LED indicators provide control and feedback to help you create the lighting setup of your dreams.

Open Box Products Have a Limited 2-Year Manufacturer Warranty    For Programmable Control of LED Lighting    Allows Control of Color and Intensity    Supports DMX512 and Art-Net    Display Screen

The Stage CL gives you all the manual controls and automation you need to get the most out of your LEDs

With the Stage CL you can control up to 512 DMX channels, connecting either through the DMX-512 output or the Ethernet output for Art-net

The Stage CL has high-quality 60mm faders, push-button encoders, responsive tactile buttons, and multi-color LED indicators, all packaged in a smooth and compact chassis that you can carry in one hand

the Stage CL touch-screen display provides an easy to use interface for control and patching lights, monitor playback, edit scenes, chases & cues, adjust fade times, apply preset colors, and set up the console preferences

Each of the twelve channels has a sturation encoder and a Hue encoder that you can adjust to set the color you want. As you turn the dials, a LED on the channel shows the color you're creating

Tap the Snapshot button to save the look you have on stage and the Stage CL holds that look while you adjust any of the other controls to create your next look, then fades into it when you tap the button again

You can group any number of channels together and use just one set of pots to set the color for all of them

Featuring a selection of color presets to choose from, you can switch between full and half saturation, both at the click of a single button

Related Questions and Answers

Q: 1. How many fixtures can I attach to this board?

A: You could daisy-chain hundreds of fixtures to the CHAUVET DJ Stage Designer 50 24-Channel Dimming Console (B&H# CHSTAGEDES50). The more probable limiting factor is that it has 24 channels for control. If each fixture requires, say, four channels (this varies by fixture), then you can maintain independent control of each controllable feature of each fixture up to six fixtures. That's because 4 channels x 6 fixtures = 24.

Q: 2. Does this board work with Protools and does it control the Protools interface?

A: You may use the Soundcraft Si Impact to record audio into protools via the USB interface. You may not however control the protools software interface because this is not a midi controller.

Q: 3. does it have automixing capabilities?

A: No, the Soundcraft Si Impact does not have automixing capabilities.

Q: 4. Is the width adjustable? I have a very road case with a StudioLive in it ... but it's not 36" wide.

A: Yes the width of the ProX EZ-TILT is adjustable up to 38".

Q: 5. I was seeing the Soundcraft Si Impact in the Soundcraft website and i can see that this model is not compatible with the Soundcraft ViSi Remote App (only is compatible the Expresion and Performer Si series), just is compatible with the Soundcraft ViSi Listen. So its means that i cant manage all the mixing functions from an Ipad like other mixers like Presonus or Behringer, so just i can up and down levels (like a personal monitors), but i havent. all functionallity like others. Is this right or not?

A: I asked them on Twitter and Soundcraft replied that the viSi Remote does work on theimpact. Check with themOn twitter.

Q: 6. Has the SI Impact a headphone jack on the monitor section or in general?

A: The headphone jack in the bottom left front is used for main monitoring and solo of any channel(s) - fro Soundcraft: normally the LR signal but may be PFL/AFL, or other signal as set in the MONITOR system menus. Also you may patch a pair of outputs to the monitor bus for use with studio monitors.

Q: 7. IS THERE A MANUAL FOR THE -ETC CS20 ?

A: There is. It can be found on ETCs website.

Q: 8. Does this have accessory jack for handheld microphone?

A: Motorola does not offer a handheld microphone for this radio.

Q: 9. is this capable of automixing like the Dugan cards and are dmx control options?

A: No, the Soundcraft Si Impact is not capable of automixing.

Q: 10. Will the traditional Motorola stye surveillance earpiece and mic work with radio?

A: Yes, the Motorola DTR700 Digital 2-Way Radio will work with traditional Motorola earpieces such as the Motorola HKLN4601 Single Wire Surveillance Earpiece with In-Line Mic and PTT (MOHKLN4601).